| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SSH dissector crash in Wireshark 4.4.0 to 4.4.8 allows denial of service |
| MONGO dissector infinite loop in Wireshark 4.4.0 to 4.4.9 and 4.2.0 to 4.2.13 allows denial of service |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Starting in version 2.2.0 and prior to versions 2.11.14 and 2.12.5, a missing sanity check on a WebSockets frame could trigger a server panic in the nats-server. This happens before authentication, and so is exposed to anyone who can connect to the websockets port. Versions 2.11.14 and 2.12.5 contains a fix. A workaround is available. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points. If one is able to do so, a defense in depth of restricting either of these will mitigate the attack. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, when using ACLs on message subjects, these ACLs were not applied in the `$MQTT.>` namespace, allowing MQTT clients to bypass ACL checks for MQTT subjects. Versions 2.11.15 and 2.12.6 contain a fix. No known workarounds are available. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a client which can connect to the leafnode port can crash the nats-server with a certain malformed message pre-authentication. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable leafnode support if not needed or restrict network connections to the leafnode port, if plausible without compromising the service offered. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a malicious client which can connect to the WebSockets port can cause unbounded memory use in the nats-server before authentication; this requires sending a corresponding amount of data. This is a milder variant of CVE-2026-27571. That earlier issue was a compression bomb, this vulnerability is not. Attacks against this new issue thus require significant client bandwidth. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable websockets if not required for project deployment. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, if a nats-server is run with static credentials for all clients provided via argv (the command-line), then those credentials are visible to any user who can see the monitoring port, if that too is enabled. The `/debug/vars` end-point contains an unredacted copy of argv. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, configure credentials inside a configuration file instead of via argv, and do not enable the monitoring port if using secrets in argv. Best practice remains to not expose the monitoring port to the Internet, or to untrusted network sources. |
| flatted is a circular JSON parser. Prior to version 3.4.2, the parse() function in flatted can use attacker-controlled string values from the parsed JSON as direct array index keys, without validating that they are numeric. Since the internal input buffer is a JavaScript Array, accessing it with the key "__proto__" returns Array.prototype via the inherited getter. This object is then treated as a legitimate parsed value and assigned as a property of the output object, effectively leaking a live reference to Array.prototype to the consumer. Any code that subsequently writes to that property will pollute the global prototype. This issue has been patched in version 3.4.2. |
| Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Starting in version 1.0.0 and prior to versions 1.0.1, 1.3.3, 1.6.1, 1.9.2, and 1.10.2, the Tekton Pipelines git resolver is vulnerable to path traversal via the `pathInRepo` parameter. A tenant with permission to create `ResolutionRequests` (e.g. by creating `TaskRuns` or `PipelineRuns` that use the git resolver) can read arbitrary files from the resolver pod's filesystem, including ServiceAccount tokens. The file contents are returned base64-encoded in `resolutionrequest.status.data`. Versions 1.0.1, 1.3.3, 1.6.1, 1.9.2, and 1.10.2 contain a patch. |
| NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_dav_module module that might allow an attacker to trigger a buffer overflow to the NGINX worker process; this vulnerability may result in termination of the NGINX worker process or modification of source or destination file names outside the document root. This issue affects NGINX Open Source and NGINX Plus when the configuration file uses DAV module MOVE or COPY methods, prefix location (nonregular expression location configuration), and alias directives. The integrity impact is constrained because the NGINX worker process user has low privileges and does not have access to the entire system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Vim is an open source, command line text editor. Prior to version 9.2.0202, a command injection vulnerability exists in Vim's glob() function on Unix-like systems. By including a newline character (\n) in a pattern passed to glob(), an attacker may be able to execute arbitrary shell commands. This vulnerability depends on the user's 'shell' setting. This issue has been patched in version 9.2.0202. |
| Cross-site scripting (XSS) vulnerability in a reachable files_pdfviewer example directory in Nextcloud with versions before 22.2.10.33, 23.0.12.29, 24.0.12.28, 25.0.13.23, 26.0.13.20, 27.1.11.20, 28.0.14.11, 29.0.16.8, 30.0.17, 31.0.10, and 32.0.1 allows attackers to execute arbitrary JavaScript in the context of a user's browser via a crafted PDF file to viewer.html. This issue is related to CVE-2024-4367, but the root cause of this Nextcloud issue is that the product exposes executable example code on a same-origin basis. |
| WWBN AVideo is an open source video platform. In versions up to and including 26.0, the `sanitizeFFmpegCommand()` function in `plugin/API/standAlone/functions.php` is designed to prevent OS command injection in ffmpeg commands by stripping dangerous shell metacharacters (`&&`, `;`, `|`, `` ` ``, `<`, `>`). However, it fails to strip `$()` (bash command substitution syntax). Since the sanitized command is executed inside a double-quoted `sh -c` context in `execAsync()`, an attacker who can craft a valid encrypted payload can achieve arbitrary command execution on the standalone encoder server. Commit 25c8ab90269e3a01fb4cf205b40a373487f022e1 contains a patch. |
| Langflow is a tool for building and deploying AI-powered agents and workflows. Versions 1.2.0 through 1.8.1 have a bypass of the patch for CVE-2025-68478 (External Control of File Name), leading to the root architectural issue within `LocalStorageService` remaining unresolved. Because the underlying storage layer lacks boundary containment checks, the system relies entirely on the HTTP-layer `ValidatedFileName` dependency. This defense-in-depth failure leaves the `POST /api/v2/files/` endpoint vulnerable to Arbitrary File Write. The multipart upload filename bypasses the path-parameter guard, allowing authenticated attackers to write files anywhere on the host system, leading to Remote Code Execution (RCE). Version 1.9.0 contains an updated fix. |
| Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to version 1.7.1, in the download_profile_picture function of the /profile_pictures/{folder_name}/{file_name} endpoint, the folder_name and file_name parameters are not strictly filtered, which allows the secret_key to be read across directories. Version 1.7.1 contains a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s/slb: Fix SLB multihit issue during SLB preload
On systems using the hash MMU, there is a software SLB preload cache that
mirrors the entries loaded into the hardware SLB buffer. This preload
cache is subject to periodic eviction — typically after every 256 context
switches — to remove old entry.
To optimize performance, the kernel skips switch_mmu_context() in
switch_mm_irqs_off() when the prev and next mm_struct are the same.
However, on hash MMU systems, this can lead to inconsistencies between
the hardware SLB and the software preload cache.
If an SLB entry for a process is evicted from the software cache on one
CPU, and the same process later runs on another CPU without executing
switch_mmu_context(), the hardware SLB may retain stale entries. If the
kernel then attempts to reload that entry, it can trigger an SLB
multi-hit error.
The following timeline shows how stale SLB entries are created and can
cause a multi-hit error when a process moves between CPUs without a
MMU context switch.
CPU 0 CPU 1
----- -----
Process P
exec swapper/1
load_elf_binary
begin_new_exc
activate_mm
switch_mm_irqs_off
switch_mmu_context
switch_slb
/*
* This invalidates all
* the entries in the HW
* and setup the new HW
* SLB entries as per the
* preload cache.
*/
context_switch
sched_migrate_task migrates process P to cpu-1
Process swapper/0 context switch (to process P)
(uses mm_struct of Process P) switch_mm_irqs_off()
switch_slb
load_slb++
/*
* load_slb becomes 0 here
* and we evict an entry from
* the preload cache with
* preload_age(). We still
* keep HW SLB and preload
* cache in sync, that is
* because all HW SLB entries
* anyways gets evicted in
* switch_slb during SLBIA.
* We then only add those
* entries back in HW SLB,
* which are currently
* present in preload_cache
* (after eviction).
*/
load_elf_binary continues...
setup_new_exec()
slb_setup_new_exec()
sched_switch event
sched_migrate_task migrates
process P to cpu-0
context_switch from swapper/0 to Process P
switch_mm_irqs_off()
/*
* Since both prev and next mm struct are same we don't call
* switch_mmu_context(). This will cause the HW SLB and SW preload
* cache to go out of sync in preload_new_slb_context. Because there
* was an SLB entry which was evicted from both HW and preload cache
* on cpu-1. Now later in preload_new_slb_context(), when we will try
* to add the same preload entry again, we will add this to the SW
* preload cache and then will add it to the HW SLB. Since on cpu-0
* this entry was never invalidated, hence adding this entry to the HW
* SLB will cause a SLB multi-hit error.
*/
load_elf_binary cont
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing
The hp_populate_*_elements_from_package() functions in the hp-bioscfg
driver contain out-of-bounds array access vulnerabilities.
These functions parse ACPI packages into internal data structures using
a for loop with index variable 'elem' that iterates through
enum_obj/integer_obj/order_obj/password_obj/string_obj arrays.
When processing multi-element fields like PREREQUISITES and
ENUM_POSSIBLE_VALUES, these functions read multiple consecutive array
elements using expressions like 'enum_obj[elem + reqs]' and
'enum_obj[elem + pos_values]' within nested loops.
The bug is that the bounds check only validated elem, but did not consider
the additional offset when accessing elem + reqs or elem + pos_values.
The fix changes the bounds check to validate the actual accessed index. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix NULL dereference on root when tracing inode eviction
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here. |
| In the Linux kernel, the following vulnerability has been resolved:
media: adv7842: Avoid possible out-of-bounds array accesses in adv7842_cp_log_status()
It's possible for cp_read() and hdmi_read() to return -EIO. Those
values are further used as indexes for accessing arrays.
Fix that by checking return values where it's needed.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
