| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Cisco application-hosting framework (CAF) component of the Cisco IOx application environment could allow an authenticated, remote attacker to write or modify arbitrary files in the virtual instance running on the affected device. The vulnerability is due to insufficient input validation of user-supplied application packages. An attacker who can upload a malicious package within Cisco IOx could exploit the vulnerability to modify arbitrary files. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52317. |
| A vulnerability in the Data-in-Motion (DMo) process installed with the Cisco IOx application environment could allow an unauthenticated, remote attacker to cause a stack overflow that could allow remote code execution with root privileges in the virtual instance running on an affected device. The vulnerability is due to insufficient bounds checking in the DMo process. An attacker could exploit this vulnerability by sending crafted packets that are forwarded to the DMo process for evaluation. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. This vulnerability affects the following Cisco 800 Series Industrial Integrated Services Routers: Cisco IR809 and Cisco IR829. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52330. |
| A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804. |
| A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892. |
| A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353. |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. |
| A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069. |
| A vulnerability in the DHCP code for the Zero Touch Provisioning feature of Cisco ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a format string vulnerability when processing a crafted DHCP packet for Zero Touch Provisioning. An attacker could exploit this vulnerability by sending a specially crafted DHCP packet to an affected device. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco ASR 920 Series Aggregation Services Routers that are running an affected release of Cisco IOS XE Software (3.13 through 3.18) and are listening on the DHCP server port. By default, the devices do not listen on the DHCP server port. Cisco Bug IDs: CSCuy56385. |
| Network Data Loss Prevention is vulnerable to MIME type sniffing which allows older versions of Internet Explorer to perform MIME-sniffing on the response body, potentially causing the response body to be interpreted and displayed as a content type other than the intended content type. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut47751. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727. |
| A vulnerability in the web framework code of Cisco Prime Service Catalog could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against the user of the web interface of the affected system. More Information: CSCvc79842 CSCvc79846 CSCvc79855 CSCvc79873 CSCvc79882 CSCvc79891. Known Affected Releases: 11.1.2. |
| A vulnerability in the Plug-and-Play (PnP) subsystem of the Cisco Aironet 1800, 2800, and 3800 Series Access Points running a Lightweight Access Point (AP) or Mobility Express image could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges. The vulnerability is due to insufficient validation of PnP server responses. The PnP feature is only active while the device does not contain a configuration, such as a first time boot or after a factory reset has been issued. An attacker with the ability to respond to PnP configuration requests from the affected device can exploit the vulnerability by returning malicious PnP responses. If a Cisco Application Policy Infrastructure Controller - Enterprise Module (APIC-EM) is available on the network, the attacker would need to exploit the issue in the short window before a valid PnP response was received. If successful, the attacker could gain the ability to execute arbitrary code with root privileges on the underlying operating system of the device. Cisco has confirmed that the only vulnerable software version is 8.3.102.0. Cisco Bug IDs: CSCvb42386. |
| A vulnerability in the web framework of Cisco Unified Communications Manager (CallManager) could allow an authenticated, remote attacker to perform a cross-site scripting (XSS) attack. More Information: CSCvb70033. Known Affected Releases: 11.5(1.11007.2). Known Fixed Releases: 12.0(0.98000.507) 11.0(1.23900.5) 11.0(1.23900.3) 10.5(2.15900.2). |
| An Access-Control Filtering Mechanisms Bypass vulnerability in certain access-control filtering mechanisms on Cisco Nexus 7000 Series Switches could allow an unauthenticated, remote attacker to bypass defined traffic configured within an access control list (ACL) on the affected system. More Information: CSCtz59354. Known Affected Releases: 5.2(4) 6.1(3)S5 6.1(3)S6 6.2(1.121)S0 7.2(1)D1(1) 7.3(0)ZN(0.161) 7.3(1)N1(0.1). Known Fixed Releases: 7.3(0)D1(1) 6.2(2) 6.1(5) 8.3(0)KMT(0.24) 8.3(0)CV(0.337) 7.3(1)N1(1) 7.3(0)ZN(0.210) 7.3(0)ZN(0.177) 7.3(0)ZD(0.194) 7.3(0)TSH(0.99) 7.3(0)SC(0.14) 7.3(0)RSP(0.7) 7.3(0)N1(1) 7.3(0)N1(0.193) 7.3(0)IZN(0.13) 7.3(0)IB(0.102) 7.3(0)GLF(0.44) 7.3(0)D1(0.178) 7.1(0)D1(0.14) 7.0(3)ITI2(1.6) 7.0(3)ISH1(2.13) 7.0(3)IFD6(0.78) 7.0(3)IFD6(0) 7.0(3)IDE6(0.12) 7.0(3)IDE6(0) 7.0(3)I2(1) 7.0(3)I2(0.315) 7.0(1)ZD(0.3) 7.0(0)ZD(0.84) 6.2(1.149)S0 6.2(0.285) 6.1(5.32)S0 6.1(4.97)S0 6.1(2.30)S0. |
| A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441. |
| A vulnerability in the web framework of Cisco Unified Communications Manager (CallManager) could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of the web interface of the affected software. More Information: CSCvb70021. Known Affected Releases: 11.5(1.11007.2). |
| A Denial of Service vulnerability in the Telnet remote login functionality of Cisco NX-OS Software running on Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause a Telnet process used for login to terminate unexpectedly and the login attempt to fail. There is no impact to user traffic flowing through the device. Affected Products: This vulnerability affects Cisco Nexus 9000 Series Switches that are running Cisco NX-OS Software and are configured to allow remote Telnet connections to the device. More Information: CSCux46778. Known Affected Releases: 7.0(3)I3(0.170). Known Fixed Releases: 7.0(3)I3(1) 7.0(3)I3(0.257) 7.0(3)I3(0.255) 7.0(3)I2(2e) 7.0(3)F1(1.22) 7.0(3)F1(1). |
