| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
gve: guard XSK operations on the existence of queues
This patch predicates the enabling and disabling of XSK pools on the
existence of queues. As it stands, if the interface is down, disabling
or enabling XSK pools would result in a crash, as the RX queue pointer
would be NULL. XSK pool registration will occur as part of the next
interface up.
Similarly, xsk_wakeup needs be guarded against queues disappearing
while the function is executing, so a check against the
GVE_PRIV_FLAGS_NAPI_ENABLED flag is added to synchronize with the
disabling of the bit and the synchronize_net() in gve_turndown. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1745: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the sample (unsigned int)
and the timestamp. This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
In split_large_buddy(), we might call pfn_to_page() on a PFN that might
not exist. In corner cases, such as when freeing the highest pageblock in
the last memory section, this could result with CONFIG_SPARSEMEM &&
!CONFIG_SPARSEMEM_EXTREME in __pfn_to_section() returning NULL and and
__section_mem_map_addr() dereferencing that NULL pointer.
Let's fix it, and avoid doing a pfn_to_page() call for the first
iteration, where we already have the page.
So far this was found by code inspection, but let's just CC stable as the
fix is easy. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adding array index check to prevent memory corruption
[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix handling of plane refcount
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states. |
| In the Linux kernel, the following vulnerability has been resolved:
kunit: Fix potential null dereference in kunit_device_driver_test()
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add a NULL check for test_state. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information
These four chips:
* W25N512GW
* W25N01GW
* W25N01JW
* W25N02JW
all require a single bit of ECC strength and thus feature an on-die
Hamming-like ECC engine. There is no point in filling a ->get_status()
callback for them because the main ECC status bytes are located in
standard places, and retrieving the number of bitflips in case of
corrected chunk is both useless and unsupported (if there are bitflips,
then there is 1 at most, so no need to query the chip for that).
Without this change, a kernel warning triggers every time a bit flips. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
On x86-64 calling bpf_get_smp_processor_id() in a kernel with CONFIG_SMP
disabled can trigger the following bug, as pcpu_hot is unavailable:
[ 8.471774] BUG: unable to handle page fault for address: 00000000936a290c
[ 8.471849] #PF: supervisor read access in kernel mode
[ 8.471881] #PF: error_code(0x0000) - not-present page
Fix by inlining a return 0 in the !CONFIG_SMP case. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Handle lack of irqdomain gracefully
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9: Add Cleaner Shader Deinitialization in gfx_v9_0 Module
This commit addresses an omission in the previous patch related to the
cleaner shader support for GFX9 hardware. Specifically, it adds the
necessary deinitialization code for the cleaner shader in the
gfx_v9_0_sw_fini function.
The added line amdgpu_gfx_cleaner_shader_sw_fini(adev); ensures that any
allocated resources for the cleaner shader are freed correctly, avoiding
potential memory leaks and ensuring that the GPU state is clean for the
next initialization sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/gr/gf100: Fix missing unlock in gf100_gr_chan_new()
When the call to gf100_grctx_generate() fails, unlock gr->fecs.mutex
before returning the error.
Fixes smatch warning:
drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c:480 gf100_gr_chan_new() warn: inconsistent returns '&gr->fecs.mutex'. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix blksize < PAGE_SIZE for file-backed mounts
Adjust sb->s_blocksize{,_bits} directly for file-backed
mounts when the fs block size is smaller than PAGE_SIZE.
Previously, EROFS used sb_set_blocksize(), which caused
a panic if bdev-backed mounts is not used. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs_common: must not hold RCU while calling nfsd_file_put_local
Move holding the RCU from nfs_to_nfsd_file_put_local to
nfs_to_nfsd_net_put. It is the call to nfs_to->nfsd_serv_put that
requires the RCU anyway (the puts for nfsd_file and netns were
combined to avoid an extra indirect reference but that
micro-optimization isn't possible now).
This fixes xfstests generic/013 and it triggering:
"Voluntary context switch within RCU read-side critical section!"
[ 143.545738] Call Trace:
[ 143.546206] <TASK>
[ 143.546625] ? show_regs+0x6d/0x80
[ 143.547267] ? __warn+0x91/0x140
[ 143.547951] ? rcu_note_context_switch+0x496/0x5d0
[ 143.548856] ? report_bug+0x193/0x1a0
[ 143.549557] ? handle_bug+0x63/0xa0
[ 143.550214] ? exc_invalid_op+0x1d/0x80
[ 143.550938] ? asm_exc_invalid_op+0x1f/0x30
[ 143.551736] ? rcu_note_context_switch+0x496/0x5d0
[ 143.552634] ? wakeup_preempt+0x62/0x70
[ 143.553358] __schedule+0xaa/0x1380
[ 143.554025] ? _raw_spin_unlock_irqrestore+0x12/0x40
[ 143.554958] ? try_to_wake_up+0x1fe/0x6b0
[ 143.555715] ? wake_up_process+0x19/0x20
[ 143.556452] schedule+0x2e/0x120
[ 143.557066] schedule_preempt_disabled+0x19/0x30
[ 143.557933] rwsem_down_read_slowpath+0x24d/0x4a0
[ 143.558818] ? xfs_efi_item_format+0x50/0xc0 [xfs]
[ 143.559894] down_read+0x4e/0xb0
[ 143.560519] xlog_cil_commit+0x1b2/0xbc0 [xfs]
[ 143.561460] ? _raw_spin_unlock+0x12/0x30
[ 143.562212] ? xfs_inode_item_precommit+0xc7/0x220 [xfs]
[ 143.563309] ? xfs_trans_run_precommits+0x69/0xd0 [xfs]
[ 143.564394] __xfs_trans_commit+0xb5/0x330 [xfs]
[ 143.565367] xfs_trans_roll+0x48/0xc0 [xfs]
[ 143.566262] xfs_defer_trans_roll+0x57/0x100 [xfs]
[ 143.567278] xfs_defer_finish_noroll+0x27a/0x490 [xfs]
[ 143.568342] xfs_defer_finish+0x1a/0x80 [xfs]
[ 143.569267] xfs_bunmapi_range+0x4d/0xb0 [xfs]
[ 143.570208] xfs_itruncate_extents_flags+0x13d/0x230 [xfs]
[ 143.571353] xfs_free_eofblocks+0x12e/0x190 [xfs]
[ 143.572359] xfs_file_release+0x12d/0x140 [xfs]
[ 143.573324] __fput+0xe8/0x2d0
[ 143.573922] __fput_sync+0x1d/0x30
[ 143.574574] nfsd_filp_close+0x33/0x60 [nfsd]
[ 143.575430] nfsd_file_free+0x96/0x150 [nfsd]
[ 143.576274] nfsd_file_put+0xf7/0x1a0 [nfsd]
[ 143.577104] nfsd_file_put_local+0x18/0x30 [nfsd]
[ 143.578070] nfs_close_local_fh+0x101/0x110 [nfs_localio]
[ 143.579079] __put_nfs_open_context+0xc9/0x180 [nfs]
[ 143.580031] nfs_file_clear_open_context+0x4a/0x60 [nfs]
[ 143.581038] nfs_file_release+0x3e/0x60 [nfs]
[ 143.581879] __fput+0xe8/0x2d0
[ 143.582464] __fput_sync+0x1d/0x30
[ 143.583108] __x64_sys_close+0x41/0x80
[ 143.583823] x64_sys_call+0x189a/0x20d0
[ 143.584552] do_syscall_64+0x64/0x170
[ 143.585240] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 143.586185] RIP: 0033:0x7f3c5153efd7 |
| In the Linux kernel, the following vulnerability has been resolved:
nfs/localio: must clear res.replen in nfs_local_read_done
Otherwise memory corruption can occur due to NFSv3 LOCALIO reads
leaving garbage in res.replen:
- nfs3_read_done() copies that into server->read_hdrsize; from there
nfs3_proc_read_setup() copies it to args.replen in new requests.
- nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages()
which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf
contains a ridiculous len.
- This is copied to rq_private_buf and xs_read_stream_request()
eventually passes the kvec to sock_recvmsg() which receives incoming
data into entirely the wrong place.
This is easily reproduced with NFSv3 LOCALIO that is servicing reads
when it is made to pivot back to using normal RPC. This switch back
to using normal NFSv3 with RPC can occur for a few reasons but this
issue was exposed with a test that stops and then restarts the NFSv3
server while LOCALIO is performing heavy read IO. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: fix handling of the failed kzalloc() memory allocation
On the linux-next, next-20241108 vanilla kernel, the coccinelle tool gave the
following error report:
./net/9p/trans_usbg.c:912:5-11: ERROR: allocation function on line 911 returns
NULL not ERR_PTR on failure
kzalloc() failure is fixed to handle the NULL return case on the memory exhaustion. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
The erratum_1386_microcode array requires an empty entry at the end.
Otherwise x86_match_cpu_with_stepping() will continue iterate the array after
it ended.
Add an empty entry to erratum_1386_microcode to its end. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereference
drm_mode_duplicate() could return NULL due to lack of memory,
which will then call NULL pointer dereference. Add a check to
prevent it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix the memory allocation issue in amdgpu_discovery_get_nps_info()
Fix two issues with memory allocation in amdgpu_discovery_get_nps_info()
for mem_ranges:
- Add a check for allocation failure to avoid dereferencing a null
pointer.
- As suggested by Christophe, use kvcalloc() for memory allocation,
which checks for multiplication overflow.
Additionally, assign the output parameters nps_type and range_cnt after
the kvcalloc() call to prevent modifying the output parameters in case
of an error return. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc()
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add NULL checks for all the kunit_kzalloc() in sound_kunit.c |
