| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Bidirectional Forwarding Detection (BFD) offload implementation of Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to cause a crash of the iosd process, causing a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when the BFD header in a BFD packet is incomplete. An attacker could exploit this vulnerability by sending a crafted BFD message to or across an affected switch. A successful exploit could allow the attacker to trigger a reload of the system. This vulnerability affects Catalyst 4500 Supervisor Engine 6-E (K5), Catalyst 4500 Supervisor Engine 6L-E (K10), Catalyst 4500 Supervisor Engine 7-E (K10), Catalyst 4500 Supervisor Engine 7L-E (K10), Catalyst 4500E Supervisor Engine 8-E (K10), Catalyst 4500E Supervisor Engine 8L-E (K10), Catalyst 4500E Supervisor Engine 9-E (K10), Catalyst 4500-X Series Switches (K10), Catalyst 4900M Switch (K5), Catalyst 4948E Ethernet Switch (K5). Cisco Bug IDs: CSCvc40729. |
| A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted packet to an affected device on TCP port 4786. Only Smart Install client switches are affected. Cisco devices that are configured as a Smart Install director are not affected by this vulnerability. Cisco Bug IDs: CSCvd40673. |
| A vulnerability in the Border Gateway Protocol (BGP) over an Ethernet Virtual Private Network (EVPN) for Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition, or potentially corrupt the BGP routing table, which could result in network instability. The vulnerability exists due to changes in the implementation of the BGP MPLS-Based Ethernet VPN RFC (RFC 7432) draft between IOS XE software releases. When the BGP Inclusive Multicast Ethernet Tag Route or BGP EVPN MAC/IP Advertisement Route update packet is received, it could be possible that the IP address length field is miscalculated. An attacker could exploit this vulnerability by sending a crafted BGP packet to an affected device after the BGP session was established. An exploit could allow the attacker to cause the affected device to reload or corrupt the BGP routing table; either outcome would result in a DoS. The vulnerability may be triggered when the router receives a crafted BGP message from a peer on an existing BGP session. This vulnerability affects all releases of Cisco IOS XE Software prior to software release 16.3 that support BGP EVPN configurations. If the device is not configured for EVPN, it is not vulnerable. Cisco Bug IDs: CSCui67191, CSCvg52875. |
| A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881. |
| A vulnerability in the crypto engine of the Cisco Integrated Services Module for VPN (ISM-VPN) running Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient handling of VPN traffic by the affected device. An attacker could exploit this vulnerability by sending crafted VPN traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to hang or crash, resulting in a DoS condition. Cisco Bug IDs: CSCvd39267. |
| Certain instructions need intercepting and emulating by Xen. In some
cases Xen emulates the instruction by replaying it, using an executable
stub. Some instructions may raise an exception, which is supposed to be
handled gracefully. Certain replayed instructions have additional logic
to set up and recover the changes to the arithmetic flags.
For replayed instructions where the flags recovery logic is used, the
metadata for exception handling was incorrect, preventing Xen from
handling the the exception gracefully, treating it as fatal instead. |
| Ampere AmpereOne AC03 devices before 3.5.9.3, AmpereOne AC04 devices before 4.4.5.2, and AmpereOne M devices before 5.4.5.1 allow an incorrectly formed SMC call to UEFI-MM MMCommunicate service that could result in an out-of-bounds write within the UEFI-MM Secure Partition context. |
| Ampere AmpereOne AC03 devices before 3.5.9.3, AmpereOne AC04 devices before 4.4.5.2, and AmpereOne M devices before 5.4.5.1 allow an incorrectly formed SMC call to UEFI-MM PCIe driver that could result in an out-of-bounds write within PCIe driver’s S-EL0 address space. |
| A vulnerability, which was classified as critical, has been found in gmg137 snap7-rs up to 1.142.1. Affected by this issue is the function pthread_cond_destroy of the component Public API. The manipulation leads to memory corruption. The exploit has been disclosed to the public and may be used. |
| Pterodactyl is a free, open-source game server management panel. Versions 1.11.11 and below do not revoke active SFTP connections when a user is removed from a server instance or has their permissions changes with respect to file access over SFTP. This allows a user that was already connected to SFTP to remain connected and access files even after their permissions are revoked. A user must have been connected to SFTP at the time of their permissions being revoked in order for this vulnerability to be exploited. This issue is fixed in version 1.12.0. |
| Pterodactyl is a free, open-source game server management panel. Versions 1.11.11 and below allow TOTP to be used multiple times during its validity window. Users with 2FA enabled are prompted to enter a token during sign-in, and afterward it is not sufficiently marked as used in the system. This allows an attacker who intercepts that token to use it in addition to a known username/password during the 60-second token validity window. The attacker must have intercepted a valid 2FA token (for example, during a screen share). This issue is fixed in version 1.12.0. |
| Windows SmartScreen Security Feature Bypass Vulnerability |
| Improper export of component in GoodLock prior to version 2.2.04.95 allows local attackers to install arbitrary applications from Galaxy Store. |
| A reflected Cross-site Scripting (XSS) vulnerability affecting ENOVIA Collaborative Industry Innovator from Release 3DEXPERIENCE R2022x through Release 3DEXPERIENCE R2025x allows an attacker to execute arbitrary script code in user's browser session. |
| Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. In Coolify versions up to and including v4.0.0-beta.434, a command injection vulnerability exists in the git source input fields of a resource, allowing a low privileged user (member) to execute system commands as root on the Coolify instance. As of time of publication, it is unclear if a patch is available. |
| Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. In Coolify versions up to and including v4.0.0-beta.434, an attacker can initiate a password reset for a victim, and modify the host header of the request to a malicious value. The victim will receive a password reset email, with a link to the malicious host. If the victim clicks this link, their reset token is sent to the attacker's server, allowing the attacker to use it to change the victim's password and takeover their account. As of time of publication, it is unclear if a patch is available. |
| Craft is a platform for creating digital experiences. In versions 5.0.0-RC1 through 5.8.20 and 4.0.0-RC1 through 4.16.16, authenticated users on a Craft installation could potentially expose sensitive assets via their user profile photo via maliciously crafted requests. Users should update to the patched versions (5.8.21 and 4.16.17) to mitigate the issue. |
| Craft is a platform for creating digital experiences. In versions 5.0.0-RC1 through 5.8.20 and 4.0.0-RC1 through 4.16.16, the Craft CMS GraphQL `save_<VolumeName>_Asset` mutation is vulnerable to Server-Side Request Forgery (SSRF). This vulnerability arises because the `_file` input, specifically its `url` parameter, allows the server to fetch content from arbitrary remote locations without proper validation. Attackers can exploit this by providing internal IP addresses or cloud metadata endpoints as the `url`, forcing the server to make requests to these restricted services. The fetched content is then saved as an asset, which can subsequently be accessed and exfiltrated, leading to potential data exposure and infrastructure compromise. This exploitation requires specific GraphQL permissions for asset management within the targeted volume. Users should update to the patched 5.8.21 and 4.16.17 releases to mitigate the issue. |
| Craft is a platform for creating digital experiences. Versions 5.0.0-RC1 through 5.8.20 and 4.0.0-RC1 through 4.16.16 are vulnerable to potential authenticated Remote Code Execution via Twig SSTI. For this to work, users must have administrator access to the Craft Control Panel, and allowAdminChanges must be enabled, which is against Craft CMS' recommendations for any non-dev environment. Alternatively, a non-administrator account with allowAdminChanges disabled can be used, provided access to the System Messages utility is available. It is possible to craft a malicious payload using the Twig `map` filter in text fields that accept Twig input under Settings in the Craft control panel or using the System Messages utility, which could lead to a RCE. Users should update to the patched versions (5.8.21 and 4.16.17) to mitigate the issue. |
| Craft is a platform for creating digital experiences. Versions 5.0.0-RC1 through 5.8.20 and 4.0.0-RC1 through 4.16.16 are vulnerable to potential authenticated Remote Code Execution via malicious attached Behavior. Note that attackers must have administrator access to the Craft Control Panel for this to work. Users should update to the patched versions (5.8.21 and 4.16.17) to mitigate the issue. |
