| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: lan78xx: Limit packet length to skb->len
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Additionally prevent integer underflow when size is less than
ETH_FCS_LEN. |
| An attacker with a valid read-only account can bypass Doris MCP Server’s read-only mode due to improper access control, allowing modifications that should have been prevented by read-only restrictions.
Impact:
Bypasses read-only mode; attackers with read-only access may perform unauthorized modifications.
Recommended action for operators: Upgrade to version 0.6.0 as soon as possible (this release contains the fix). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix data corruption after failed write
When buffered write fails to copy data into underlying page cache page,
ocfs2_write_end_nolock() just zeroes out and dirties the page. This can
leave dirty page beyond EOF and if page writeback tries to write this page
before write succeeds and expands i_size, page gets into inconsistent
state where page dirty bit is clear but buffer dirty bits stay set
resulting in page data never getting written and so data copied to the
page is lost. Fix the problem by invalidating page beyond EOF after
failed write. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/userptr: fix notifier vs folio deadlock
User is reporting what smells like notifier vs folio deadlock, where
migrate_pages_batch() on core kernel side is holding folio lock(s) and
then interacting with the mappings of it, however those mappings are
tied to some userptr, which means calling into the notifier callback and
grabbing the notifier lock. With perfect timing it looks possible that
the pages we pulled from the hmm fault can get sniped by
migrate_pages_batch() at the same time that we are holding the notifier
lock to mark the pages as accessed/dirty, but at this point we also want
to grab the folio locks(s) to mark them as dirty, but if they are
contended from notifier/migrate_pages_batch side then we deadlock since
folio lock won't be dropped until we drop the notifier lock.
Fortunately the mark_page_accessed/dirty is not really needed in the
first place it seems and should have already been done by hmm fault, so
just remove it.
(cherry picked from commit bd7c0cb695e87c0e43247be8196b4919edbe0e85) |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: inftlcore: Add error check for inftl_read_oob()
In INFTL_findwriteunit(), the return value of inftl_read_oob()
need to be checked. A proper implementation can be
found in INFTL_deleteblock(). The status will be set as
SECTOR_IGNORE to break from the while-loop correctly
if the inftl_read_oob() fails. |
| Multiple vulnerabilities exist in the web-based management interface of AOS-10 GW and AOS-8 Controller/Mobility Conductor. Successful exploitation of these vulnerabilities could allow an authenticated, remote attacker to download arbitrary files from the filesystem of an affected device. |
| This vulnerability allows access to arbitrary files in the application server file system due to a path traversal vulnerability in JavaServer Faces (JSF) 2.2.20 documented in CVE-2020-6950. The remediation for this vulnerability contained in this security fix provides additional changes to the remediation announced in May 2021 tracked by ETN IIQSAW-3585 and January 2024 tracked by IIQFW-336. This vulnerability in IdentityIQ is assigned CVE-2024-2227. |
| This vulnerability allows an authenticated user to perform a Lifecycle Manager flow or other QuickLink for a target user outside of the defined QuickLink Population. |
| A vulnerability in the Captive Portal of an AOS-10 GW and AOS-8 Controller/Mobility Conductor could allow a remote attacker to conduct a reflected cross-site scripting (XSS) attack. Successful exploitation could enable the attacker to execute arbitrary script code in the victim's browser within the context of the affected interface. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()
A warning is seen when running the latest kernel on a BlueField SOC:
[251.512704] ------------[ cut here ]------------
[251.512711] invalid sysfs_emit: buf:0000000003aa32ae
[251.512720] WARNING: CPU: 1 PID: 705264 at fs/sysfs/file.c:767 sysfs_emit+0xac/0xc8
The warning is triggered because the mlxbf-bootctl driver invokes
"sysfs_emit()" with a buffer pointer that is not aligned to the
start of the page. The driver should instead use "sysfs_emit_at()"
to support non-zero offsets into the destination buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
Russell King reports that on the ZII dev rev B, deleting a bridge VLAN
from a user port fails with -ENOENT:
https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/
This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(),
which tries to find an MST entry in &chip->msts associated with the SID,
but fails and returns -ENOENT as such.
But we know that this chip does not support MST at all, so that is not
surprising. The question is why does the guard in mv88e6xxx_mst_put()
not exit early:
if (!sid)
return 0;
And the answer seems to be simple: the sid comes from vlan.sid which
supposedly was previously populated by mv88e6xxx_vtu_get().
But some chip->info->ops->vtu_getnext() implementations do not populate
vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case,
later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is
just residual stack memory.
Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge
VLAN mapped to the default MSTI. For some chips, SID 0 is valid and
installed by mv88e6xxx_stu_setup(). A chip which does not support the
STU would implicitly only support mapping all VLANs to the default MSTI,
so although SID 0 is not valid, it would be sufficient, if we were to
zero-initialize the vlan structure, to fix the bug, due to the
coincidence that a test for vlan.sid == 0 already exists and leads to
the same (correct) behavior.
Another option which would be sufficient would be to add a test for
mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one
which already exists in mv88e6xxx_mst_get(). But that placement means
the caller will have to dereference vlan.sid, which means it will access
uninitialized memory, which is not nice even if it ignores it later.
So we end up making both modifications, in order to not rely just on the
sid == 0 coincidence, but also to avoid having uninitialized structure
fields which might get temporarily accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: don't allow datadir only
In theory overlayfs could support upper layer directly referring to a data
layer, but there's no current use case for this.
Originally, when data-only layers were introduced, this wasn't allowed,
only introduced by the "datadir+" feature, but without actually handling
this case, resulting in an Oops.
Fix by disallowing datadir without lowerdir. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ngbe: fix memory leak in ngbe_probe() error path
When ngbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent
error paths after ngbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when ngbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: fix memory leak in txgbe_probe() error path
When txgbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent
error paths after txgbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when txgbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info
We have to make sure that the info returned by the helper is valid
before using it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool. |
| A Cross-Site Request Forgery (CSRF) vulnerability was discovered in OpenKM Community Edition on or before version 6.3.12. The vulnerability exists in /admin/DatabaseQuery, which allows an attacker to manipulate a victim with administrative privileges to execute arbitrary SQL commands. |
| A vulnerability was found in Shenzhen Dashi Tongzhou Information Technology AgileBPM up to 1.0.0. It has been declared as critical. Affected by this vulnerability is the function doFilter of the file \agile-bpm-basic-master\ab-auth\ab-auth-spring-security-oauth2\src\main\java\com\dstz\auth\filter\AuthorizationTokenCheckFilter.java. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
The variable d->name, returned by devm_kasprintf(), could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool |
| A pre-auth SQL injection vulnerability in the email protection feature of Sophos Firewall versions older than 21.0 MR1 (21.0.1) allows access to the reporting database and can lead to remote code execution if a specific configuration of Secure PDF eXchange (SPX) is enabled in combination with the firewall running in High Availability (HA) mode. |
| A weak credentials vulnerability potentially allows privileged system access via SSH to Sophos Firewall older than version 20.0 MR3 (20.0.3). |
