| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| BookStack before 26.05.5 contains an authentication bypass vulnerability in its social login implementation that allows unauthenticated attackers to sign in as arbitrary users by authenticating through a different social provider sharing the same driver_id namespace. Attackers can authenticate at one enabled social provider using a user ID that matches an account linked to a different social provider, bypassing credential verification entirely because the SocialAuthService::handleLoginCallback query ignores the driver column when retrieving linked account records. |
| On affected platforms running Arista EOS with both 802.1X port authentication and the RADIUS proxy feature configured with dynamic authorization, a low-privileged attacker on an adjacent network segment who induces a RADIUS packet through a configured RADIUS proxy client can prevent RADIUS dynamic authorization messages, including Change-of-Authorization (CoA) and Disconnect-Requests as defined in RFC 5176, from being applied to locally authenticated 802.1X sessions.
This allows an endpoint session that a RADIUS server or network access control system has ordered disconnected to remain authorized on the network.
Both 802.1X port authentication with dynamic authorization and RADIUS proxy with dynamic authorization must be explicitly configured for a deployment to be exposed to this issue.
This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks. |
| Only self-managed Grafana instances with Auth Proxy authentication and identity caching enabled (sync_ttl greater than zero) are affected. The Auth Proxy cache key concatenated the username and forwarded identity attributes without a delimiter, so distinct identities could collide on one key. An authenticated user who shapes their own attributes to collide with a higher-privileged user's, while that user's cache entry is live, is authenticated as that user, up to Administrator (authentication bypass by spoofing). |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote unauthenticated attacker to gain access to sensitive information through session IP binding bypass in Navigator for i. |
| N-able Mail Assure through April 2026 contains a design-level authorization flaw that allows an authenticated SMTP user to send outbound email using MAIL FROM addresses belonging to other tenants. When connecting to the SMTP TCP port and performing SMTP AUTH with valid credentials, the server accepts arbitrary sender domains without enforcing any domain-to-account binding. As a result, an attacker from any tenant can impersonate other tenant domains, producing messages that pass SPF and DMARC validation. NOTE: N-able's position is that the behavior is intended functionality of its shared SMTP relay architecture and that the service does not represent that it enforces per-tenant sender-domain binding. |
| webhookd is a minimalist webhook server that triggers shell scripts and external processes through HTTP requests. Prior to 1.22.0, webhookd deployments without htpasswd authentication forwarded all incoming HTTP headers through HTTPParamsToShellVars in pkg/api/index.go into the hook script environment without an allowlist. When an upstream reverse proxy did not strip a client-supplied X-WebAuthn-User header and a hook script trusted that variable for identity or privilege, a remote unauthenticated attacker could spoof another user, bypass script security controls, and access or modify resources available to the impersonated identity. This issue is fixed in version 1.22.0. |
| Cosmos provides users the ability self-host a home server by acting as a secure gateway to your application, as well as a server manager. Prior to 0.22.19, tokenMiddleware in src/proxy/routerGen.go can return through the Constellation tunnel bypass before removing x-cosmos-user, x-cosmos-role, x-cosmos-user-role, and x-cosmos-mfa headers and before invoking AdminOnlyWithRedirect. An attacker with a valid x-cstln-auth API key for an enrolled device who reaches Cosmos through the Constellation Nebula tunnel can supply a chosen x-cosmos-user value to a route with AuthEnabled enabled when the upstream application trusts that forward-auth header. The request can bypass Cosmos JWT, password, MFA, and AdminOnly checks, allowing user impersonation and admin-tier reads or writes exposed by the proxied application. This issue is fixed in version 0.22.19. |
| proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation. |
| Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.56, and from 3.0.0 until 3.7.12, a client-supplied dot-form header such as X.Authenticated.User survives ForwardAuth replacement and underscoreHeadersStrategy because Go treats it as distinct from X-Authenticated-User while normalization-prone CGI, WSGI, PHP, and NGINX backends collapse both names. A backend can consequently consume the client value instead of the identity Traefik asserted, allowing identity spoofing for any header managed by Traefik. The aliasHeadersStrategy protection is disabled by default and must be configured as delete or reject. The mitigation is available in 2.11.56 and 3.7.12. |
| In Siglet current and past versions the refresh token handler do not enforce proof of possession of the issuer DID. |
| A routing rule selects between two different authentication mechanisms for the same downstream service based on the value of a client-supplied request header, rather than on any property the client cannot control. An authenticated user in possession of a shared service credential can set this header to route around the primary role-based authorization check and reach the alternate path's fixed, elevated role instead. This allows a low-privileged authenticated attacker who knows the shared credential to perform actions reserved for a higher-privileged role. |
| Authentication bypass by spoofing vulnerability in Apache Syncope.
When the configured JWKS settings for internal JWT authentication are disclosed (at least protocol and key), an attacker can spoof another user's privileges after completing a successful authentication and obtaining a valid JWT.
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.7, from 4.1.0-M0 through 4.1.2.
Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue. |
| An improper validation vulnerability exists within PingAM where a well-crafted request allows arbitrary or protected ID Token claims to be set or overridden. In certain configurations this could allow an attacker to bypass authentication controls via spoofing leading to privilege escalation or impersonation. |
| Traefik is an HTTP reverse proxy and load balancer. In Traefik v1.x, v2.x through v2.11.55, and v3.0.0 through v3.7.11, header names are canonicalized only on dashes, so X-Auth-User, X_Auth_User and X.Auth.User are treated as three distinct headers by Traefik, while backends that derive variable names from header names (CGI, WSGI, PHP, NGINX and others) collapse them into a single variable. A client can therefore smuggle a dot-form alias of a header that Traefik manages past the middleware managing it — for example supplying X.Authenticated.User alongside the canonical X-Authenticated-User written by the ForwardAuth middleware — causing such a backend to read the client-supplied value instead of the identity Traefik asserted. In the tested configuration (PHP 8.2 built-in SAPI over an HTTP/1 backend path), Go's lexical header ordering makes the attacker-supplied value win deterministically, so a client that ForwardAuth admits as a low-privilege identity can be treated by the backend as a different user or role. Any header Traefik sets is affected, not only ForwardAuth's. This is an incomplete fix for GHSA-x677-9fxg-v5c5, which blocked only the underscore form. Fixed in v2.11.56 and v3.7.12, which add the aliasHeadersStrategy entry-point option; because it defaults to 'keep' for backwards compatibility, it must be explicitly set to 'delete' or 'reject' for the fix to take effect. Unmaintained release lines will not receive a patch. |
| matrix-sdk-crypto is a no-network-IO implementation of a state machine that handles end-to-end encryption for Matrix clients. Starting in version 0.12.0 and prior to version 0.17.0, the matrix-sdk-crypto crate was missing a check for the user ID when decrypting an Olm-encrypted event containing the `sender_device_keys` property. This could be exploited to forge an encrypted to-device event, but only if the attacker colludes with the homeserver operator. This issue is fixed in matrix-sdk-crypto 0.17.0. There are no known workarounds for the issue. |
| Unauthenticated Bypass Vulnerability in Simple Cloudflare Turnstile <= 1.42.1 versions. |
| An authentication bypass vulnerability was discovered in Lenovo Software Fix that could allow a local authenticated user to perform arbitrary code execution with elevated privileges. |
| Command Center API contained an authentication bypass issue affecting privilege management. Software customers upgrade to resolved maintenance release. Update Command Center. |
| IP2Location Country Blocker plugin for WordPress before 2.45.0 contains an access control bypass vulnerability that allows unauthenticated remote attackers to circumvent IP-based restrictions by forging the X-Real-IP HTTP header. Attackers can set the X-Real-IP header to an allowlisted IP address to bypass page, link, or site-wide access restrictions and access otherwise-blocked resources. |
| An attacker could impersonate the camera and place themselves in a man-in-the-middle or device-emulation position. This permits manipulation of device status responses, observation of application requests, and potential triggering of firmware-update behavior. |
