| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Insufficient session expiration in Apache Wicket.
org.apache.wicket.protocol.ws.WebSocketSettings#newWebSocketRequest() wraps the WebSocket upgrade request in an org.apache.wicket.protocol.ws.api.ServletRequestCopy, which is kept for the life of the connection and used to build the request for every frame that arrives on it. Copying the request is deliberate and is documented as such, because the container recycles the upgrade request once the handshake is over. The container session is copied along with it, into an org.apache.wicket.protocol.ws.api.HttpSessionCopy holding the session attributes as they stood when the connection was opened. That second copy is not necessary, because a session, unlike a request, is not discarded at the end of a request. Every frame afterwards resolves its Wicket session through ISessionStore#lookup(), which reads it out of the copy, so the connection is detached from the live container session for as long as it stays open.
Ending the session through the container therefore does not end the connection. After an idle timeout, an HttpSession#invalidate() call made from a filter or from a security framework, a container-managed logout, or a session replacement, the connection goes on resolving the org.apache.wicket.Session instance that existed when it was opened, together with that session's attributes and, for applications built on wicket-auth-roles, the signed-in state held on that same instance, so an authorization decision taken inside a WebSocket callback is taken against an identity that has already been revoked. The copy is also what the connection writes through: a Session#invalidateNow() issued from inside a WebSocket callback invalidates the copy and leaves the container session valid, and session attributes set over the connection are written to the copy rather than to the session.
An application is affected where it uses Wicket's native WebSocket support on pages or shared resources that require an authenticated session, and where sessions are ended by the container rather than by Wicket. Session#invalidateNow(), and AuthenticatedWebSession#invalidate() and #signOut() which call it, remain effective for a WebSocketBehavior on a page: they clear the page manager, and the connection can then no longer resolve the page it was opened for. A WebSocketResource is not limited in that way, because a frame naming a resource is served against a throwaway page and never consults the page manager, so such a connection outlives Wicket's own sign-out as well. Some containers close WebSocket connections themselves when the HTTP session they were opened under is destroyed, in which case the connection ends regardless; that is a property of the container rather than of Wicket. Applications that do not use the native WebSocket support are not affected.
This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Older, unsupported releases from 6.0.0 onwards are also affected. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue. |
| The refresh token grant type in WSO2 products fails to re-validate account status before issuing new access tokens. This weakness allows an attacker to obtain valid access tokens for user accounts even after they have been blocked by the user store, bypassing account lockout mechanisms.
This vulnerability can lead to unauthorized access to user accounts and their associated resources. Attackers can leverage this to perform actions on behalf of blocked users, potentially leading to privilege escalation or data exfiltration depending on the permissions of the compromised account. |
| In Modem, there is a possible application crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01707455; Issue ID: MSV-9503. |
| In Modem, there is a possible application crash due to a logic error. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01416152; Issue ID: MSV-7924. |
| The PayHere Payment Gateway WordPress plugin from 2.4.0 through 2.4.5 does not verify the authenticity of payment notifications when the merchant secret is unset, which is the default state, allowing unauthenticated attackers to forge a payment confirmation and mark any order as paid without payment. |
| A weakness has been identified in mathurvishal CloudClassroom-PHP-Project. This issue affects some unknown processing of the component Global Session Handler. Executing a manipulation can lead to session expiration. The attack may be launched remotely. A high complexity level is associated with this attack. The exploitability is assessed as difficult. The exploit has been made available to the public and could be used for attacks. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix false warning in ring_buffer_map_get_reader()
The mmap reader can warn when it catches up with a writer that is still
committing events. rb_get_reader_page() returns NULL in this case, but
ring_buffer_map_get_reader() treats that result as an error.
The initial rb_per_cpu_empty() check filters out an empty buffer, but it
does not guarantee that the next reader page has committed data. Writers
do not take reader_lock and can advance commit_page before publishing the
committed length on the new page. rb_get_reader_page() can swap to that
page, catch up with the writer and return NULL.
Handle NULL through the existing no-data exit without warning. Remove the
caller's reader_page == commit_page check as well, since the reader-page
helper already handles that case. The existing metadata update and return
path remain in place. |
| WebDyne versions from 2.014 before 3.022 for Perl issue session cookies without the Secure, HttpOnly and SameSite attributes.
WebDyne::Session sets its session cookie with only a name, value and path.
Browsers then send the session ID over plain HTTP and with cross-site requests, and expose it to page scripts. A network attacker or an injected script can steal the session, and another site can make requests that carry it. |
| Tesseract is an open source OCR engine. Prior to 5.5.4, WeightMatrix::DeSerialize trusts a mode byte from a traineddata LSTM network and calls WeightMatrix::DeSerializeOld when kDoubleFlag is clear. In default FAST_FLOAT builds, DeSerializeOld invokes ASSERT_HOST instead of returning an error, so loading a crafted model through TessBaseAPI::Init terminates the process and causes denial of service. This issue is fixed in version 5.5.4. |
| Copernik XML Factory provides secure-by-default JAXP factory creation for Java. Prior to 0.1.2, Copernik XML Factory does not block XInclude resource resolution on the stock JDK provider after an application enables XInclude on a factory returned by `XmlFactories.newDocumentBuilderFactory()` or `XmlFactories.newSAXParserFactory()`, or on an `XMLReader` passed through `XmlFactories.harden()`. An application parsing untrusted XML can resolve attacker-controlled `xi:include` references to disclose local files or, through `http` references, reach internal network endpoints by server-side request forgery. Exploitation requires use of one of those factory/hardening APIs, the stock JDK provider with Apache Xerces absent from the classpath, explicit `setXIncludeAware(true)` or the equivalent reader feature, and XML from an untrusted source. The Xerces provider selected when Xerces is present and the Android provider are unaffected. This issue is fixed in version 0.1.2. |
| Coop is an open source review and moderation tool from ROOST. Prior to 1.0.2, `resetPasswordForToken` updates the password row without invalidating database-backed sessions. An attacker who has acquired a password and established a session retains access even after the legitimate user resets the password, leaving the compromised account under attacker control until the session expires at its `30-day` maximum age. This issue is fixed in version 1.0.2. |
| Pi-hole is a DNS sinkhole that protects devices from unwanted content without installing any client-side software. From 6.4.2 until 6.5, the root-run advanced/Scripts/updatecheck.sh cron job applies truncate -s 0 and chmod 644 to /etc/pihole/versions while following symbolic links in a directory owned by the pihole user. An attacker executing as pihole can replace that path with a symlink so the scheduled root operations truncate or create an arbitrary root-owned file, or race the operations so chmod makes a sensitive target world-readable without truncating it. This issue is fixed in version 6.5. |
| pgAdmin 4 did not invalidate a user's existing sessions when their password changed, either through the user's own change password dialog or through an administrator resetting it in User Management. A session established before the change, for example on another device or by someone who had obtained the old password or a session cookie, therefore stayed logged in after the change, which is the step a user or administrator takes precisely to cut such access off. It remained usable until it expired.
The fix rotates the user's session identifier (fs_uniquifier) whenever the password is changed, so every other session of that user is logged out. The session that made the change is logged in again and keeps its database connections. Saved server passwords, including those for shared servers, are re-encrypted under the new key; any that cannot be decrypted are cleared and the user is told. If re-encryption fails, the sessions are still revoked and the saved passwords are cleared rather than the change failing.
This issue affects pgAdmin 4: before 9.19. |
| Stirling-PDF is a locally hosted web application that facilitates various operations on PDF files. From 2.13.1 until 2.13.2, the POST /api/v1/convert/svg/pdf endpoint renders attacker-supplied SVG through Apache Batik, and a scheme-less root-relative image reference bypasses SvgSanitizer.isExternalUrl() before Batik resolves it against the file:///input.svg document base as a same-origin local file. The convert() and addSvgAsPage() paths in app/core/src/main/java/stirling/software/SPDF/utils/SvgToPdf.java can then render image-decodable server files into the returned PDF when sanitization is enabled, including without authentication on login-disabled deployments or with non-admin access when login is enabled. The issue discloses PNG, JPG, GIF, or SVG content and provides an existence oracle only for image-decodable paths; plain text, binary files, directories, XInclude text, external entities, explicit file URLs, and tested HTTP references are not disclosed through this mechanism. This issue is fixed in version 2.13.2. |
| The system fails to invalidate existing access tokens associated with sub-organization users during sensitive account management operations such as password reset, role change, or sub-organization disablement. This oversight allows previously issued tokens to remain active even after the user's access context has been modified or revoked through administrative actions.
The identified issue could lead to unauthorized access by a malicious actor, but only when all of the following conditions are met: previously issued access tokens remain active, and these tokens have been exposed to malicious actors. |
| A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service.
Root Cause:
In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process.
Affected Scenarios:
Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3462
Note:
The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0). |
| Supabase Realtime provides Broadcast, Presence, and Postgres Changes via WebSockets. Prior to version 2.103.1, the REST broadcast endpoints accept an expired JWT when the exp claim is encoded as a JSON string instead of a JSON number. The same route rejects an expired integer exp token signed with the same tenant secret. The accepted request returns 202 and emits the broadcast to subscribers. This could allow an unauthenticated attacker can broadcast realtime messages to subscribers. The attack can be performed via the Internet/only from within the supabase project. The impact of broadcasting messages to subscribers is application specific. This issue has been patched in version 2.103.1. |
| ArcadeDB before 26.10.2 contains an improper authorization vulnerability that allows revoked users to retain access through already-open Postgres, Bolt, MongoDB, or Redis wire-protocol connections. Attackers holding an existing connection can keep reading and writing data after deletion, grant removal, or password rotation, because executors keep a stale ServerSecurityUser. |
| A reachable assertion in Apache bRPC (version < 1.18.0) on all platforms allows a malicious remote peer to crash the process, resulting in denial of service.
Root Cause:
When a Socket with health checking enabled fails, Socket::WaitAndReset closes its file descriptor while the event dispatcher may still be delivering an input event (EPOLLIN/EVFILT_READ) that was fetched for the just-closed fd. If the health check then succeeds and revives the Socket, Socket::Address succeeds again while the fd is still -1 (the next write reconnects on demand). In that window, Socket::OnInputEvent hits CHECK(!(events & EPOLLIN)) (or the kqueue equivalent) because the Socket is addressable but has no fd. CHECK failures terminate the process when bRPC is built with glog or when the gflag -crash_on_fatal_log is enabled (CHECK always terminates in OFFICIAL_BUILD/NDEBUG builds as well).
Affected Scenarios:
Applications using bRPC clients with health check enabled (-health_check_interval). A malicious remote peer that the client connects to can deliberately abort connections and immediately accept the health check probes, racing connection teardown against health check revival to trigger the assertion and abort the process.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3510
Note:
After applying the fix, stale input events on a Socket revived without an fd are silently dropped instead of triggering the assertion. No user-visible interface or wire protocol is changed. |
| Enforceable assertion in the streaming feature of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a malformed stream feedback frame.
Root Cause:
When handling FRAME_TYPE_FEEDBACK frames, bRPC calls Stream::SetRemoteConsumed() which contains CHECK(_cur_buf_size > 0) and unconditionally asserts CHECK(buf.IsEmpty()) on the frame payload. A feedback frame that carries an unexpected payload, or a feedback frame received on a stream where flow control is disabled (cur_buf_size == 0), reaches these assertions. On failure, CHECK failures abort the process, allowing an unauthenticated single client (once a stream is established) to terminate the server and cause a denial of service.
Affected Scenarios:
Use bRPC server with the streaming control feature (Stream API) served from untrusted network.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3494
The fix rejects malformed feedback frames with EPROTO and closes only the affected stream instead of crashing the whole process, and it bounds buffer shrinking so cur_buf_size never drops to 0 while flow control is enabled. |
