| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid
When the administrator mounts with forceuid or forcegid (uid=/gid=
mount options), they expect all files to appear owned by the specified
user/group. However, several code paths unconditionally called
sid_to_id() to overwrite cf_uid/cf_gid with server-provided values,
ignoring the administrator's explicit override:
- smb311_posix_info_to_fattr() (stat via POSIX extensions)
- cifs_posix_to_fattr() (readdir via POSIX extensions)
- parse_sec_desc() (CIFS ACL ownership mapping)
This allowed an untrusted server to dictate local file ownership even
when the mount was configured to force specific uid/gid values.
Fix all three call sites to check CIFS_MOUNT_OVERR_UID and
CIFS_MOUNT_OVERR_GID before calling sid_to_id(), following the
same pattern already used by cifs_unix_basic_to_fattr() for unix
extensions. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate firmware log buffer metadata
The tracing log headers parsed by fw_log_print_buffer() reside in
DMA-shared BOs that the NPU firmware can write to.
fw_log_from_bo() validated log->header_size and log->size, but
fw_log_print_buffer() re-read those same fields from shared memory
afterwards, allowing a TOCTOU where firmware changes them between the
check and the use, and making the host dereference out-of-bounds
addresses while printing logs.
Snapshot the validated values once with READ_ONCE() and pass them down
explicitly in a new struct ivpu_fw_log_desc instead of re-reading them
from the shared struct. |
| A vulnerability in an API of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass authentication.
This vulnerability is due to insufficient authentication control on an API endpoint. An attacker could exploit this vulnerability by sending a crafted request to an affected API endpoint. A successful exploit could allow the attacker to gain unauthorized access to the affected device by bypassing the web-based management interface. |
| AnyIO is a high level asynchronous concurrency and networking framework that works on top of either Trio or asyncio. In 4.14.0, AnyIO accepts the POSIX extra_groups argument in anyio.run_process() and anyio.open_process(), but open_process() forwards the group argument to the backend instead of extra_groups. A caller that supplies extra_groups=[] to clear inherited supplementary groups can therefore launch a child that retains the parent process groups, undermining a privilege-dropping boundary. If group is also supplied, the integer group value is passed where an iterable of supplementary groups is expected and the launch can fail with TypeError. This issue affects POSIX applications that rely on AnyIO subprocess helpers to launch less-privileged child processes. This issue is fixed in version 4.14.2. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Use of Non-Canonical URL Paths for Authorization Decisions vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Gladys Assistant before 5.1.0 contains a password reset link poisoning vulnerability that allows unauthenticated remote attackers to obtain valid password reset tokens for any account by exploiting the client-supplied origin parameter in the forgot_password endpoint without server-side validation. Attackers can send a crafted request specifying an attacker-controlled origin, causing the victim to receive a poisoned reset link that discloses the session token to the attacker, enabling full account takeover including administrator accounts. |
| Weak Password Recovery Mechanism for Forgotten Password vulnerability in Ankaref Innovation and Technology Inc. LIBRID/LIBREF allows Password Recovery Exploitation.
This issue affects LIBRID/LIBREF: from 2.01.0.2183 before 18.9.26.2319. |
| A vulnerability in Cisco ISE could allow an authenticated, remote attacker to obtain write access on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain write access to the underlying operating system.
To exploit this vulnerability, the attacker must have valid administrative credentials.
Note: For CVE-2026-20282, Cisco has assigned a Security Impact Rating (SIR) of High rather than Medium as the score indicates. The reason is that it is easy to get to root from the achieved privilege level. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's URL normalization does not recognize dot and dotdot path segments when they carry semicolon parameters. A request such as /user/..;foo=bar/admin is therefore not canonicalized to /admin even when path normalization is enabled. If an upstream interprets the segment according to RFC 3986 while Envoy applies routing or RBAC to the uncollapsed path, a remote client can cause path confusion and bypass path-based security policy. The relevant scope boundary is that the security consequence depends on a downstream/upstream path interpretation mismatch or a path-based Envoy decision. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| An information disclosure issue was addressed with improved state management. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 26.6.1. A website may be able to determine a user's IP address with Private Relay turned on. |
| An information disclosure issue was addressed with improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 26.6.1. A website may be able to determine a user's IP address with Private Relay turned on. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Clear VM_MAYWRITE on DBR/toggle page mmap
bnxt_re_mmap() rejects VM_WRITE for the DBR_PAGE and TOGGLE_PAGE mmap
flags, but a read-only mapping can still retain VM_MAYWRITE. nd later
be upgraded with mprotect(PROT_WRITE). This can bypass the write check
that only runs at mmap time.
Clear VM_MAYWRITE before vm_insert_page() in the shared DBR/toggle-page
branch, matching the existing policy that userspace writes are not
expected for these pages. |
| n8n before 2.32.1 (and before 2.31.5) is vulnerable to account takeover via the Token Exchange Embed Login feature. When a validly-signed incoming token was matched to a local account by its email claim, the service did not verify that the email claim was verified, nor that the trusted key's permitted role ceiling covered that account. As a result, anyone able to obtain a token accepted by a configured trusted key (for example, a trusted issuer emitting unverified email addresses) could authenticate as any existing user and gain full account control. This issue only affects instances where the embed login feature is enabled and at least one trusted key source is configured. |
| SOGo before 5.12.11 constructs password-reset links using the client-supplied Origin header as the authority, allowing unauthenticated attackers to redirect recovery tokens to attacker-controlled domains. Attackers can submit password recovery requests with a malicious Origin header to have valid password-reset tokens mailed to victim recovery addresses within links pointing to attacker infrastructure, enabling account takeover. |
| Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics (component: Platform Security). Supported versions that are affected are 8.2.0.0.0, 12.2.1.4.0 and 26.01.0.0.0. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle Business Intelligence Enterprise Edition executes to compromise Oracle Business Intelligence Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of Oracle Business Intelligence Enterprise Edition. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H). |
| The password reset funcionality is vulnerable to unauthorized account modification due to improper validation of the user_id parameter. An attacker can manipulate this predictable numeric identifier to reset passwords for arbitrary users without proving account ownership. |
| A vulnerability was determined in jaychouchannel Tourism-Management-System up to d984d172dceca907f8b447efbdb06dc233f7938d. Impacted is the function resetPass of the file UsersController.java of the component Password Recovery. This manipulation causes weak password recovery. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. Patch name: 9cb6215ac871f99a90cde763cf003e95ff282283. It is recommended to apply a patch to fix this issue. |
| This issue was addressed through improved state management. This issue is fixed in Safari 27, iOS 27 and iPadOS 27, macOS Golden Gate 27. A malicious website may be able to determine what apps a user has installed. |
| IBM Cloud Pak for Business Automation 26.0.0 through 26.0.0 Interim Fix 001, 25.0.0 through 25.0.0 Interim Fix 005, 24.0.1 through 24.0.1 Interim Fix 008, and 24.0.0 through 24.0.0 Interim Fix 009 is vulnerable to an XPath injection vulnerability, which could allow an authenticated attacker to exfiltrate sensitive application data and/or determine the structure of the XML document. |
| gitoxide is an implementation of git written in Rust. Prior to 0.13.3, the gix-sec crate on Windows incorrectly treats repositories controlled by another user as trusted when an administrator runs a dependent program with an unfiltered elevated token. In gix-sec/src/identity.rs, gix_sec::identity::is_path_owned_by_current_user obtains folder_owner and token_owner, but its administrator-specific IsWellKnownSid and CheckTokenMembership checks examine the running token rather than confirming the directory owner. This bypasses safe.directory-style protection for repositories owned and configured by a limited user, allowing repository configuration or hooks to execute commands with the administrator's privileges when an affected operation is performed. Exploitation requires Windows, an elevated administrator, a program that relies on gix-sec trust results, and interaction with a repository controlled by another user. An unelevated UAC process is not affected, and cloning is not affected because repository configuration and hooks are not copied. This issue is fixed in version 0.13.3. |
