| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Inappropriate implementation in AI in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Low) |
| In ssh-agent in OpenSSH before 10.5, some operations can occur remotely but were intended to occur only locally, including operations that add tokens or use keys. This is caused by misinteraction between agent locking and the session-bind@openssh.com extension. |
| A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 2100 Series Security Appliances, Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvf63718. |
| Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass the configured file policies on an affected system. The vulnerability is due to errors in how the Snort detection engine handles specific HTTP responses. An attacker could exploit this vulnerability by sending crafted HTTP packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured file policies and deliver a malicious payload to the protected network. |
| A vulnerability in the FTP inspection engine of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software fails to release spinlocks when a device is running low on system memory, if the software is configured to apply FTP inspection and an access control rule to transit traffic, and the access control rule is associated with an FTP file policy. An attacker could exploit this vulnerability by sending a high rate of transit traffic through an affected device to cause a low-memory condition on the device. A successful exploit could allow the attacker to cause a software panic on the affected device, which could cause the device to reload and result in a temporary DoS condition. |
| A vulnerability in Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to overwrite or append arbitrary data to system files using root-level privileges. The attacker must have administrative credentials on the device. This vulnerability is due to incomplete validation of user input for a specific CLI command. An attacker could exploit this vulnerability by authenticating to the device with administrative privileges and issuing a CLI command with crafted user parameters. A successful exploit could allow the attacker to overwrite or append arbitrary data to system files using root-level privileges. |
| A vulnerability in the local malware analysis process of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to insufficient error handling in the local malware analysis process of an affected device. An attacker could exploit this vulnerability by sending a crafted file through the device. A successful exploit could allow the attacker to cause the local malware analysis process to crash, which could result in a DoS condition. Notes: Manual intervention may be required to recover from this situation. Malware cloud lookup and dynamic analysis will not be impacted. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states. |
| Craft CMS versions >= 5.0.0-RC1 before 5.10.6 and >= 4.0.0-RC1 before 4.18.2 interpolate environment variables and secrets (via ${ENV_VAR} strings in the elementId parameter) into Twig templates before rendering, even when the Twig sandbox is enabled. An authenticated attacker with control panel access can render a malicious sandboxed Twig template and, using a blind error-based technique across many requests, incrementally leak arbitrary environment variables and secrets. These can be abused to forge sessions (via CRAFT_SECURITY_KEY), escalate privileges, and steal database, SMTP, API, or blob storage credentials. Fixed in 5.10.6 and 4.18.2. |
| Improper initialization in some firmware for some Intel(R) Active Management Technology (Intel(R) AMT), and some Intel(R) Standard Manageability may allow an information disclosure. System software adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use uninterruptible resv lock for plane updates
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix shrinker deadlock
With PROVE_LOCKING on an Snapdragon X1 and VM reclaim pressure, we see:
======================================================
WARNING: possible circular locking dependency detected
7.0.0-debug+ #43 Tainted: G W
------------------------------------------------------
kswapd0/82 is trying to acquire lock:
ffff800080ec3870 (reservation_ww_class_acquire){+.+.}-{0:0}, at: msm_gem_shrinker_scan+0x17c/0x400 [msm]
but task is already holding lock:
ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
fs_reclaim_acquire+0xd0/0xf0
dma_resv_lockdep+0x224/0x348
do_one_initcall+0x84/0x5d0
do_initcalls+0x194/0x1d8
kernel_init_freeable+0x128/0x180
kernel_init+0x2c/0x160
ret_from_fork+0x10/0x20
-> #1 (reservation_ww_class_mutex){+.+.}-{4:4}:
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
dma_resv_lockdep+0x1a8/0x348
do_one_initcall+0x84/0x5d0
do_initcalls+0x194/0x1d8
kernel_init_freeable+0x128/0x180
kernel_init+0x2c/0x160
ret_from_fork+0x10/0x20
-> #0 (reservation_ww_class_acquire){+.+.}-{0:0}:
check_prev_add+0x114/0x790
validate_chain+0x594/0x6f0
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
drm_gem_lru_scan+0x1ac/0x440
msm_gem_shrinker_scan+0x17c/0x400 [msm]
do_shrink_slab+0x150/0x4a0
shrink_slab+0x144/0x460
shrink_one+0x9c/0x1b0
shrink_many+0x27c/0x5c0
shrink_node+0x344/0x550
balance_pgdat+0x2c0/0x988
kswapd+0x11c/0x318
kthread+0x10c/0x128
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
reservation_ww_class_acquire --> reservation_ww_class_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(reservation_ww_class_mutex);
lock(fs_reclaim);
lock(reservation_ww_class_acquire);
*** DEADLOCK ***
1 lock held by kswapd0/82:
#0: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
stack backtrace:
CPU: 4 UID: 0 PID: 82 Comm: kswapd0 Tainted: G W 7.0.0-debug+ #43 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: LENOVO 21BX0016US/21BX0016US, BIOS N3HET94W (1.66 ) 09/15/2025
Call trace:
show_stack+0x20/0x40 (C)
dump_stack_lvl+0x9c/0xd0
dump_stack+0x18/0x30
print_circular_bug+0x114/0x120
check_noncircular+0x178/0x198
check_prev_add+0x114/0x790
validate_chain+0x594/0x6f0
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
drm_gem_lru_scan+0x1ac/0x440
msm_gem_shrinker_scan+0x17c/0x400 [msm]
do_shrink_slab+0x150/0x4a0
shrink_slab+0x144/0x460
shrink_one+0x9c/0x1b0
shrink_many+0x27c/0x5c0
shrink_node+0x344/0x550
balance_pgdat+0x2c0/0x988
kswapd+0x11c/0x318
kthread+0x10c/0x128
ret_from_fork+0x10/0x20
kswapd0 holding fs_reclaim calls the MSM shrinker, which calls
dma_resv_lock. This in turn acquires fs_reclaim.
Fix this deadlock by using dma_resv_trylock() instead, dropping the
subsequently unused passed wait-wound lock 'ticket'.
Patchwork: https://patchwork.freedesktop.org/patch/723564/
[rob: fixup compile errors, replace lockdep splat with somethin
---truncated--- |
| n8n's JavaScript task runner shared a single module cache across all users' Code-node executions. In affected versions (before 1.123.67, 2.31.5, and 2.32.1), a user able to run a Code node could poison a cached module and thereby alter other users' Code-node executions on the same runner, affecting their confidentiality, integrity, or availability. This is a cross-user isolation break within a single n8n instance and does not constitute a sandbox escape or remote code execution. Only multi-user instances running the JS task runner with built-in or external modules enabled are affected. |
| Previously, a revoked 'SignatureKey' belonging to a CA was not correctly checked for revocation. Now, both the 'key' and 'key.SignatureKey' are checked for @revoked. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush()
wacom_wac_queue_flush() is called via the .raw_event callback
(wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush).
For USB HID devices, this callback is invoked from hid_irq_in(), which
is a URB completion handler running in atomic context. Using GFP_KERNEL
in this path can sleep, leading to a "scheduling while atomic" bug.
Use GFP_ATOMIC instead. The existing code already handles allocation
failure by skipping the fifo entry and continuing. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered
sata_dwc_enable_interrupts() is called before platform_get_irq() and
ata_host_activate(), leaving the SATA controller's interrupt mask
enabled without a registered handler. If a later step fails (irq
request, phy init, etc.) or if the controller asserts an interrupt
during probe, the irq line may fire with no handler, causing a
spurious interrupt storm.
Move sata_dwc_enable_interrupts() after ata_host_activate() so that
interrupts are only unmasked once the handler is registered and the
core is fully initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: publish QP after initialization
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Prevent rereg_mr for non-mem regions
When a QP/CQ/SRQ is created, a two step process is used
where the buffer is allocated in userspace and explicitly
registered with the normal reg_mr mechanism prior to creating
the actual QP/CQ/SRQ object.
These special registrations are indicated via an ABI field
so the driver knows that they do not have a valid mkey and
to skip the actual CQP command submission.
Since these are real MR objects from the core's perspective,
it is possible for a user application to invoke rereg_mr on them
and cause a real CQP op to be emitted with the zero-initialized
mkey value of 0.
Fix this by preventing rereg_mr on these special regions. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
