| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func->cis.max_blk_size) as the per-iteration step. The value func->cis.max_blk_size is decoded directly from the SDIO card's CIS FUNCE tuple in sdio_decode_cis() and is not validated. When a card reports a maximum block size of zero, size is always 0, remaining never decreases, and the loop spins forever.
The loop is reached from the public SDIO client API used by drivers, including sdio_read_fifo(), sdio_write_fifo(), and the incrementing register read/write helpers, each of which enters the loop while holding the per-card mutex func->card->lock. A card advertising max_blk_size == 0 therefore hangs the calling thread permanently on its first non-block-aligned transfer and never releases the mutex, denying service to the SDIO peripheral (and any subsystem such as Wi-Fi that depends on it) until the device is reset.
The malicious value must come from the SDIO card itself, so the defect is exploitable where a removable SDIO/combo card slot lets an attacker insert a crafted or malfunctioning card (a physical attack vector); on boards with a soldered SDIO peripheral it is not attacker-influenceable. There is no memory-safety, confidentiality, or integrity impact — only a permanent availability loss. The fix returns -EIO when func->cis.max_blk_size is zero, before the loop is entered. |
| An issue was discovered in Samsung Exynos Mobile Processor, Automotive Processor, and Modem Exynos 9810, Exynos 9610, Exynos 9820, Exynos 980, Exynos 850, Exynos 1080, Exynos 2100, Exynos 2200, Exynos 1280, Exynos 1380, Exynos 1330, Exynos 9110, Exynos W920, Exynos Modem 5123, Exynos Modem 5300, an Exynos Auto T5123. In the Shannon SM Task, improper handling of a loop with an unreachable exit condition cannot guarantee the termination of a required service via a malformed SM message. |
| strongSwan 5.1.3 through 6.0.7 has an infinite loop in the x509 plugin's attribute certificate parser for ietfAttrSyntax. |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.5.0 until 0.11.1, the message-chain reconstruction helper in backend/open_webui/utils/misc.py advanced through a chat history by map key but tracked visited entries using each message body's optional id field. An authenticated user could store id-less messages in a parent cycle and trigger a non-terminating walk that blocked the async event loop, grew memory until termination, and remained persistent across process restarts. This issue is fixed in version 0.11.1. |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.10.0 until 0.11.1, DELETE /api/v1/chats/{id}/messages/{message_id} used the chat-history deletion helper in backend/open_webui/models/chats.py to follow childrenIds without recording visited message identifiers. An authenticated user could store a cyclic chat tree and delete a message, causing a synchronous infinite loop on the server request loop that blocked every user's requests until the process was killed. This issue is fixed in version 0.11.1. |
| When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: fix infinite loop in fwnode_for_each_child_node()
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL
│ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1
│
│ fwnode_get_next_child_node(FWa, FWb1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1
└────┘
This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly
output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}.
The root cause is that when the current child (FWb1) belongs to the
secondary fwnode, calling get_next_child_node() on the parimary fwnode
incorrectly returns the first child (FWa1) again instead of NULL.
Fix this by dynamically checking the parent fwnode of the current child
before calling get_next_child_node(). This approach follows the pattern
established in commit b5b41ab6b0c1 ("device property: Check
fwnode->secondary in fwnode_graph_get_next_endpoint()"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix RCU stall while reaping monitor destination ring
While processing the monitor destination ring, MSDUs are reaped from the
link descriptor based on the corresponding buf_id.
However, sometimes the driver cannot obtain a valid buffer corresponding
to the buf_id received from the hardware. This causes an infinite loop
in the destination processing, resulting in a kernel crash.
kernel log:
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
Fix this by skipping the problematic buf_id and reaping the next entry,
replacing the break with the next MSDU processing.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph_cap_reclaim_work() re-queues itself for as long as
ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease
walk exhausts its `nr_to_scan` budget. This creates a busy loop that
consumes CPU without making any progress when there is nothing to
reclaim: with no cap pressure (`count==0`) and every scanned lease
still valid, each pass runs the full scan budget down to zero and
returns `-EAGAIN`, only to be queued again immediately.
The dir-lease walk made this worse. When `expire_dir_lease` is
`false` (i.e. we have no intention of reclaiming dir leases),
__dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH`
moves the dentry to the tail of the list and resets `di->time` via
__dentry_dir_lease_touch(), so a walk over N valid leases pointlessly
rewrote the list, refreshed the timestamps (preventing them from ever
aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN`
requeue.
Fix this in three steps:
- Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is
`false`. If we are not going to reclaim the lease, leave it in
place instead of churning the list and resetting its timestamp; the
walk then terminates naturally (or via `STOP` at the first fresh
lease).
- Only return `-EAGAIN` from the first (dentry-lease) walk when something
was actually freed. A full batch that frees nothing means retrying
the same list immediately is futile; fall through to the dir-lease
walk instead.
- After both walks, bail out with success (0) when nothing was freed
and there is no cap pressure (`count==0`). There is no reason to
keep retrying when we are not over the cap limit and made no
progress.
Under real cap pressure (`count>0`) the reclaim path is unchanged and
still retries via `-EAGAIN`.
Without this patch, I saw 500 ceph_trim_dentries() calls per second on
our web servers. This is very visible in `/proc/lock_stat` (5 minute
capture):
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00
-----------------------
&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
&mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
-----------------------
&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
With this patch:
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27
-----------------------
&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 1
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm-io: clone the source bio instead of copying its biovec
For DM_IO_BIO requests, do_region() built each destination bio by walking
the source bio's biovec and re-adding the pages one at a time, tracking
the remaining transfer in sectors. The vector lengths are byte granular
and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split
across pages), so the sector-based accounting could lose a sub-sector
fragment: to_sector() truncated the remainder and the outer loop spun
forever submitting empty bios, hanging the I/O.
There is no need to rebuild the biovec at all. The destination reads into
(or writes from) exactly the same pages as the source bio, so the bio can
simply clone the source's biovec with bio_alloc_clone() and remap it to
the target device. The clone inherits the source's iterator and alignment,
and the block layer splits it to the target's limits on submission, so the
whole region maps to a single cloned bio with no manual page copying or
sector accounting.
This removes the per-page copy path (and its open-coded bvec dpages
helpers) for bio-backed I/O and fixes the hang on misaligned direct I/O to
a dm-mirror device. Page-list, vma and kmem sources keep the existing copy
path. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: bound shrinker scans by examined checkpoint buffers
The jbd2 shrinker currently accounts only checkpoint buffers that it
successfully releases against nr_to_scan. Busy buffers therefore do not
consume the scan budget.
If a checkpoint transaction contains mostly busy buffers, the shrinker
can scan its entire checkpoint list while holding journal->j_list_lock.
Large checkpoint lists can result in excessive lock hold times and leave
other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls.
Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for
every buffer examined, including busy buffers. Pass NULL from checkpoint
cleanup paths so their existing full-list behavior is preserved.
This restores the scan-budget semantics that existed before
journal_shrink_one_cp_list() was changed to always scan a complete
checkpoint list. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: detect a cycle in the last-kset chain during replay
cache_replay() follows the on-media last-kset chain by next_cache_seg_id
with no cond_resched(). A forged chain that points back into a segment it
has already visited makes the replay loop follow it forever.
Cap the last-kset hops at cache->n_segs; a valid chain visits each segment
at most once. |
| strongSwan 4.6.2 through 6.0.7 has an infinite loop in PKCS#5 decryption. |
| zstd-jni versions 1.4.8-4 through 1.5.7-13 fail to validate negative length parameters in ZstdInputStreamNoFinalizer.read(), allowing attackers to trigger infinite loops. Attackers can pass negative length values to cause the read method to spin indefinitely while holding the stream monitor, blocking all other threads from accessing the stream. |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.10.0 until 0.11.1, POST /api/v1/folders/{id}/update/parent allowed a user to place a folder under itself or one of its descendants, while the folder tree walks used by DELETE /api/v1/folders/{id} and POST /api/v1/folders/{id}/read did not track visited folder identifiers. An authenticated user could persist a parent cycle and start a request that consumed CPU and memory indefinitely, with the condition remaining stored until repaired. This issue is fixed in version 0.11.1. |
| smol-toml is a small, fast, and correct TOML parser and serializer. Prior to 1.7.1, parse() can enter an infinite loop when a value inside an array or inline table is followed by a comment with no trailing newline. In src/util.ts, skipUntil() calls indexOfNewline(), receives -1 at the end of input, and resets the cursor to the beginning of the string instead of leaving the structure scan. The parser then hangs indefinitely and can consume a service's processing capacity when an application parses attacker-controlled TOML. This issue is fixed in version 1.7.1. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.1, and 12.0.1.0 through 12.0.12.28 and IBM Integration Bus for z/OS 10.1.0.0 through 10.1.0.7 could allow a remote attacker to cause a denial of service due to an infinite loop. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.3, the `pyasn1` library is vulnerable to a Denial of Service (DoS) attack caused by uncontrolled recursion when decoding ASN.1 data with deeply nested structures. An attacker can supply a crafted payload containing thousands of nested `SEQUENCE` (`0x30`) or `SET` (`0x31`) tags with "Indefinite Length" (`0x80`) markers. This forces the decoder to recursively call itself until the Python interpreter crashes with a `RecursionError` or consumes all available memory (OOM), crashing the host application. This is a distinct vulnerability from CVE-2026-23490 (which addressed integer overflows in OID decoding). The fix for CVE-2026-23490 (`MAX_OID_ARC_CONTINUATION_OCTETS`) does not mitigate this recursion issue. Version 0.6.3 fixes this specific issue. |
| libpcap BPF interpreter treats the offset in the 'ja L' BPF instruction as a signed integer to implement looping via backward jumps, but it does not limit the number of loop iterations. In particular uncommon use cases a crafted filter program can cause the interpreter to loop infinitely. |
