Export limit exceeded: 26110 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26110 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99270 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix potential UAF in reqsk_timer_handler(). When TCP socket migration fails at inet_ehash_insert() in reqsk_timer_handler(), we jump to the no_ownership: label and free the new reqsk immediately with __reqsk_free(). Thus, we must stop the new reqsk's timer before jumping to the label, but the timer might be missed since the cited commit, resulting in UAF. As we are in the original reqsk's timer context, we can safely call timer_delete_sync() for the new reqsk. Let's pass false to __inet_csk_reqsk_queue_drop() to stop the new reqsk's timer. | ||||
| CVE-2026-99254 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: don't flood a cancelling task with task_work io_ring_exit_work() asks each task which has used the ring to remove its tctx node, by task_work, and repeats that until the list is empty. io_tctx_exit_cb() doesn't touch the node while the task is in io_uring_cancel_generic(), which removes all the nodes at its end. So the work item queues the callback again as soon as it has completed, for nothing. That is more than a waste of time. task_work_run() only returns when it finds the list empty. If the rings are released from inside the cancellation, because requests of other rings held the last references to their files, up to 64 work items keep sending callbacks to the one task which is running them. It never finds the list empty, never gets back to the cancellation, the nodes stay, and so it goes on: a task with 60 pairs of rings which poll each other ran 280000 callbacks in 5 seconds, 20 seconds after exit_group(). It ends when all the senders happen to be late at the same time. Until then the task keeps a CPU and the work items busy. An exiting task can't be killed meanwhile. execve() cancels the requests in the same way, so a live task can get stuck there as well, for minutes. If it takes more than five, the work items run into the WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No privilege is needed for any of this. If the callback has met a task in cancellation, wait a little before it is sent again. Nobody has to wake the work item up for that: either the node is gone by then, or it is the turn of the next round. | ||||
| CVE-2026-99261 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: correct reservation fence slots for userq per-vm BOs eviction It fixes both the move overflow and the eviction fence add for evicting these per-vm BOs. | ||||
| CVE-2026-99237 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Hold trace_types_lock when resetting last boot data from readers update_last_data_if_empty() is called from tracing_open() with O_TRUNC, tracing_read_pipe() and tracing_buffers_read() without trace_types_lock. Two readers can both pass the LAST_BOOT test and free module_delta twice, and a module notifier can update module_delta while it is being freed. Take trace_types_lock in those paths and keep the callers that already hold it on an unlocked variant. | ||||
| CVE-2026-99262 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/timeout: don't lose a cancel as io-wq arms a timeout An IORING_OP_TIMEOUT run by io-wq, because of IOSQE_ASYNC, has the same problem as poll, futex and waitid. io_wq_submit_work() looks at IO_WQ_WORK_CANCEL once, before it issues the request. A cancel in between flags the work, gets -EALREADY, and searches ->timeout_list in vain, while the worker then adds the request and starts the timer: io-wq worker io_try_cancel() io_wq_submit_work() IO_WQ_WORK_CANCEL isn't set io_async_cancel_one() sets IO_WQ_WORK_CANCEL = -EALREADY io_timeout_cancel() = -ENOENT io_timeout() adds the request to ->timeout_list hrtimer_start() = IOU_ISSUE_SKIP_COMPLETE Nobody looks at the flag again, and the timeout runs its course. At ring exit, io_uring_try_cancel_requests() cancels io-wq work and then kills the timeouts the same way, so an exiting task can get stuck for the full duration of such a timeout. Look at the flag under ->timeout_lock, which the search takes as well, and fail the request if it is set. If the search came first, the flag is visible. If it comes later, it finds the request on the list. | ||||
| CVE-2026-99263 | 1 Linux | 1 Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: avoid retry wakeup loss when dropping ownership If a wakeup sets IO_POLL_RETRY_FLAG between the owning task consuming the existing instance of IO_POLL_RETRY_FLAG and the loop check of io_poll_check_events(), then we stall on processing the request until an unrelated wakeup comes along. Using atomic_cmpxchg instead of atomic_sub_return to guarantee both the count v and poll_refs are 0 and no wake-ups are missed. | ||||
| CVE-2026-99264 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: don't retry recv on uncommitted buffers Commit 41b70df5b38b ("io_uring/net: commit partial buffers on retry") commits ring provided buffers when a receive is going to be retried after a partial transfer, so that another request using the same buffer group can't be handed the memory the first one keeps receiving into. It commits the number of bytes received so far. That does the job for a single buffer which is consumed as a whole, but the request hangs on to all it has mapped: - For a buffer ring with IOU_PBUF_RING_INC only these bytes are consumed. The rest of the buffer stays at the head of the ring. - For a bundle only the buffers which hold these bytes are consumed, the others that were peeked stay in the ring. In both cases the next receive with that buffer group gets memory that the retried request is still going to write to, and whoever comes last overwrites the data of the other. What the retry fills isn't committed at all, as the buffer list isn't known any more at that point. So the kernel hands it out again later on, while the CQE tells the application that it was used, and for an incremental buffer that it is done with. The remainder can't be committed in advance: if the request ends up receiving less, there is no way to tell the application that more was consumed than the CQE accounts for. Complete the request with what it has got instead of retrying it. MSG_WAITALL is no longer honoured for receives into incremental buffers or multi buffer bundles, they can return a short count, with the request marked as failed like for other short MSG_WAITALL transfers. | ||||
| CVE-2026-99266 | 1 Linux | 1 Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix buffer offsets in areas above 4GB io_zcrx_queue_cqe() computes the offset of the buffer in its area from net_iov_idx(), which is an unsigned int, so the shift is done in 32 bits and only the result is widened to the u64 that goes into the CQE. An area can be up to 1TB in size. For every niov beyond the first 4GB the CQE points the application at a buffer 4GB, or a multiple of that, below the one which has the data. It reads the wrong data, and then returns a buffer it doesn't own via the refill queue while the real one is never given back. | ||||
| CVE-2026-99268 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: wake ring pollers for local task_work With IORING_SETUP_DEFER_TASKRUN completions are queued as local work, and only become CQEs when the submitter enters the kernel to wait for events. For an application that finds out via poll() or epoll on the ring fd when it is time to do that, io_uring_poll() reports EPOLLIN if local work is pending. That only helps if the work is there at the time of the call. When DEFER_TASKRUN was added, io_req_local_work_add() did io_cqring_wake(), which took care of tasks sleeping in poll() as well. Then polling got a wait queue of its own, ->poll_wq, and the wake up in io_req_local_work_add() was replaced by waking the submitter directly. Since then ->poll_wq is only woken when CQEs are committed, which for such a ring is done by the very task that is waiting to be told to: submitter completion poll(ring_fd) io_uring_poll() // nothing yet schedule() io_req_local_work_add() // ->cq_wait_nr: nobody waits // sleeps on Wake ->poll_wq when the first entry is put on the work list. Like for the eventfd, that must not be done right away if the work is queued from a wake up handler, as the chain of wake ups could get back to the wait queue whose lock is held. Use an RCU callback in that case, with a reference to the ring. | ||||
| CVE-2026-99246 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: protect node reset trace dump with node lock The tipc_node_reset_links trace event asks tipc_node_dump() to walk the node's link entries. Unlike the other node events that request link data, this event runs without the node lock. This permits bearer teardown to free a link while the trace callback is dumping it: CPU 0 CPU 1 trace_tipc_node_reset_links() tipc_node_dump() l = n->links[0].link tipc_node_write_lock() kfree(l) n->links[0].link = NULL tipc_node_write_unlock() tipc_link_dump(l) tipc_link_dump() then dereferences the stale pointer. KASAN reported: BUG: KASAN: slab-use-after-free in tipc_link_dump Read of size 4 by task poc/115 Call Trace: tipc_link_dump+0x10cb/0x16b0 tipc_node_dump+0x4bb/0x740 trace_event_raw_event_tipc_node_class+0x258/0x360 tipc_node_reset_links+0x14d/0x1a0 tipc_rcv+0x13f5/0x3030 tipc_udp_recv+0x4e3/0x670 Allocated by task 0: tipc_link_create+0x1e1/0x1020 tipc_node_check_dest+0x7d2/0x11a0 tipc_disc_rcv+0xdbf/0x1430 Freed by task 89: kfree+0x131/0x3c0 tipc_node_link_down+0x267/0x4b0 tipc_node_delete_links+0xec/0x160 bearer_disable+0x107/0x260 Take the node write lock around the trace event. This serializes the dump against tipc_node_link_down(delete=true), which frees the link under the same write lock. | ||||
| CVE-2026-99247 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Do not initialize tracefs work if tracing is disabled If trace buffer allocation fails during early boot (e.g. in early_trace_init() -> allocate_trace_buffers()), tracing_disabled is left set to 1 and the global trace array events list remains uninitialized. Later during boot, tracer_init_tracefs() (invoked via fs_initcall) queues tracerfs_init_work asynchronously without checking if tracing was disabled. When tracer_init_tracefs_work_func() runs, it calls event_trace_init() and init_tracer_tracefs(&global_trace, NULL) unconditionally. This leads to __find_event_file() dereferencing an uninitialized tr->events list, causing an early boot NULL pointer dereference Oops: BUG: Kernel NULL pointer dereference on read at 0x00000010 Faulting instruction address: 0xc000000000485be0 Oops: Kernel access of bad area, sig: 7 [#1] ... NIP [c000000000485be0] __find_event_file+0x70/0x3c0 LR [c000000000448874] init_tracer_tracefs+0x274/0xc80 Call Trace: init_tracer_tracefs+0x274/0xc80 tracer_init_tracefs_work_func+0x50/0x320 process_one_work+0x1e8/0x5c0 worker_thread+0x1dc/0x3d0 kthread+0x194/0x1b0 start_kernel_thread+0x14/0x18 Check tracing_disabled at the beginning of tracer_init_tracefs_work_func() and return immediately if tracing is disabled or failed to initialize, preventing the crash. | ||||
| CVE-2026-99265 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/openclose: keep the lock in io_pipe_fixed() io_pipe_fixed() installs both ends of the pipe in the fixed file table, drops ->uring_lock, and copies the slot numbers to the application. If that faults, it takes the lock again and removes whatever is in these slots. If the request is run by io-wq the lock really is dropped in between, and the slots are visible to everybody else. By the time the error path gets to them, they may have been closed and reused, by IORING_OP_CLOSE and a direct open or accept, or by IORING_REGISTER_FILES_UPDATE. Then a file is removed from the table that has nothing to do with the failed request. Do the copy with the lock held. Faulting in user memory under ->uring_lock is fine, the registration paths do it all the time. | ||||
| CVE-2026-99245 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: Fix key_reject_and_link() race with keyring restriction The restrict_link check in key_reject_and_link() is done before taking the keyring semaphore, racing with a concurrent keyring_restrict() that installs the restriction while holding the semaphore in write mode. Move the check to after __key_link_lock(), so it is done under the semaphore, matching the pattern used in __key_create_or_update(). | ||||
| CVE-2026-99269 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Wait for SCX_OPSS_DISPATCHING before moving tasks off DSQs A task can be found on a non-local DSQ while the CPU which dispatched it is still running ops.dequeue() and hasn't cleared SCX_OPSS_DISPATCHING. The DSQ consume and move paths don't wait for the dispatch to finish and can operate on the task concurrently with the dispatcher. Call scx_wait_dispatching() in scx_move_local_task_to_local_dsq(), unlink_dsq_and_switch_rq_lock() and move_task_between_dsqs() before they operate on the task. In scx_move_local_task_to_local_dsq(), wait before scx_resolve_local_dsq() as it may update p->scx.flags. | ||||
| CVE-2026-99257 | 1 Linux | 1 Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: shared: gracefully handle no-device lookup of shared GPIOs We use platform lookup tables for shared GPIOs. This mechanism needs a struct device to work so fwnode-based lookup with no device associated currently causes a NULL-pointer deference. Adding this functionality will require a larger rework and it has never worked anyway so add a check that allows the kernel to gracefully handle this situation with an error ahead of implementing that functionality as a new feature. | ||||
| CVE-2026-99260 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix resident conversion in ntfs_new_attr_flags When setting sparse/compressed flags on a resident attribute, the function skipped the resident-to-non-resident conversion and terminated. | ||||
| CVE-2026-99267 | 1 Linux | 1 Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/napi: make stale entries time out after 60s With dynamic tracking a NAPI id that hasn't been seen for a minute is meant to be dropped from the list the ring busy polls. The timeout is added to jiffies, but it is defined as 60 * SEC_CONVERSION, and SEC_CONVERSION isn't the number of jiffies in a second. It is the internal factor of __timespec64_to_jiffies(), HZ scaled up by SEC_JIFFIE_SC bits. For HZ=1000 that is 1000 << 22, which puts the timeout at about eight years. On 32-bit the multiplication overflows. So entries are never removed, and every id that a socket of the ring ever had keeps being polled on each wait. | ||||
| CVE-2026-99255 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't hide a link from cancellations A task that exits cancels its tracked requests and waits until they are gone. io_uring_cancel_generic() looks everywhere a request can be, and goes to sleep if it found nothing to cancel. It is woken up each time one of the requests of the task is completed by task work or freed. When io-wq is done with a request that has a link, there is a time in which the next request of the link can't be found: io_worker_handle_work() io_assign_current_work(worker, NULL) io_wq_free_work(work) io_req_find_next() // takes the link off the request io_free_req() // task work for the task io_assign_current_work(worker, linked) io_run_task_work() cond_resched() worker->cur_work = linked It is not pending, it is not the current work of a worker, and it is not yet on the list that it is about to be parked on. If the pass that the exiting task makes because of io_free_req() falls into that time, it finds nothing and the task goes to sleep. The worker then runs the link, which IO_WQ_BIT_EXIT doesn't prevent for bounded work. If that parks the request nothing is completed or freed, and nobody wakes up the task. If it is the process that exits it can't be killed any more either. NOP, IOSQE_ASYNC | IOSQE_IO_LINK FUTEX_WAIT, FUTEX2_PRIVATE exit of the thread, or of the process, up to 63us later With four of these per round 5 to 8 of 10,000 rounds hang (4 CPUs, KVM): io_uring_cancel_generic do_exit Commit f8b632e89a10 ("io_uring: tighten task exit cancellations") is about the same gap, and makes the task look again for whatever happens before io_free_req(). Free the request once the link is the current work of the worker, or pending. Whoever is woken up by that can find the link, until it is parked where cancellations look as well. To do so split io_wq_free_work() in two. | ||||
| CVE-2026-99256 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: fix issue with background work locking dm cache used a rw_semaphore for background_work_lock. Write locks on rw_semaphores have strict owner semantics, but there was no guarantee that the process that locked background_work_lock was the same process that unlocked it. This can be easily seen using a kernel compiled with CONFIG_DEBUG_RWSEMS. Given a dm cache device <cache>, run: 'dmsetup suspend <cache> && dmsetup resume <cache>'. This will trigger a kernel warning: DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)) triggered by cache_resume(). To fix this, switch from a rw_semaphore to a spinlock and a wait queue. dm cache already has a wait queue and associated counter, migration_wait and nr_allocated_migrations, that was getting woken up when background work was getting completed, but wasn't actually used by anything. This is replaced by the background_work queue and counter. | ||||
| CVE-2026-99258 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Avoid using per-cpu output page in hv_apicid_to_vp_index() hv_apicid_to_vp_index() currently uses the per-cpu hypercall input and output pages. This function is called when running in VTL2 and when running in an SEV-SNP CoCo VM with no paravisor. In the former case, the output page is allocated, but in the latter case it is not, so the hypervisor stores the output VP index in memory that has not been allocated by the guest. Fix this by using the input page for both input and output. The hypercall has very small input and output, so sharing the same page for both is straightforward. An alternative fix is to allocate the per-cpu output page when running in an SEV-SNP CoCo guest, but this uses significantly more memory, particularly with larger vCPUs counts. | ||||