Export limit exceeded: 365947 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (365947 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80701 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: enforce cursor size limits for MOB cursors vmw_cursor_plane_atomic_check() bounds cursor width and height only on the legacy update path; the SVGA_CAP2_CURSOR_MOB path -- the default on modern hosts -- accepts any size. When the requested size exceeds SVGA_REG_CURSOR_MAX_DIMENSION or SVGA_REG_MOB_MAX_SIZE, vmw_cursor_mob_get() returns -EINVAL and leaves vps->cursor.mob NULL. Its return value is then discarded in vmw_cursor_plane_prepare_fb(), so the subsequent vmw_cursor_update_mob() calls vmw_bo_map_and_cache(NULL) and oopses inside vmw_bo_map_and_cache_size() on the tbo.base.size load. Reachable from any DRM master via DRM_IOCTL_MODE_CURSOR2 with a sufficiently large width or height (e.g. cursor_max_dim + 1). Reject oversized cursors in atomic_check for both MOB-backed cursor update types. The MOB byte-size limit only applies to the SVGA_CAP2_CURSOR_MOB path (vmw_cursor_mob_size() returns 0 for GB_ONLY); compute the required MOB size in 64-bit to avoid overflow when very large dimensions are requested. In prepare_fb only call vmw_cursor_mob_get()/_map() for VMW_CURSOR_UPDATE_MOB -- the GB_ONLY path uses bo->map.virtual directly and would otherwise be silently downgraded to NONE on hosts without SVGA_CAP2_CURSOR_MOB (where vmw_cursor_mob_get() always returns -EINVAL). Degrade the update to NONE if vmw_cursor_mob_get() or vmw_cursor_mob_map() fails so the update path does not run with a NULL backing MOB. | ||||
| CVE-2026-80700 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate external BO copy bounds for both stride paths vmw_external_bo_copy() trusts caller-supplied offsets, strides, and heights and operates on imported dma-buf vmaps: - The equal-stride memcpy() bound was clamped after subtracting the offsets from dst_size and src_size; an offset larger than the BO size wraps the unsigned subtraction to a huge value and the resulting memcpy() runs off the end of the vmap. dst_stride * height is also a u32 multiplication that can overflow. - The non-equal-stride row-by-row path had no bound at all. The loop touches bytes through offset + (height - 1) * stride + width_in_bytes, with only a WARN_ON(dst_stride < width_in_bytes), and could likewise step past the end of either mapping. The offsets and strides are derived from STDU/SOU plane state, so a configured CRTC submitting a crafted atomic commit on an imported framebuffer can reach this path. Validate the exact row-copy endpoint against each BO's size up front using check_mul_overflow() and check_add_overflow(). Use the bulk memcpy() path only when width_in_bytes covers the whole stride; otherwise copy one row at a time so partial-row updates near the bottom of a framebuffer remain valid. Also reject zero strides and stride < width_in_bytes, both of which the row-by-row path cannot represent safely. | ||||
| CVE-2026-80699 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context In the nested state, the physical interrupt has already been deactivated through the HW bit in the LR. The extra deactivation would be harmless but can hit an errata case on AmpereOne, so avoid it here. On AmpereOne, deactivating a physical interrupt through ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not active, but is the highest priority pending interrupt causes the cpu to lose the interrupt pending state and also prevents the delivery of future interrupts. | ||||
| CVE-2026-80698 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks. | ||||
| CVE-2026-80697 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: ensure valid f_path for page cache sharing Previously, backing files for page cache sharing were set up with f_path left as NULL (only f_inode was valid). It worked, but a recent mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on 7.2-rc4): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy) Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 RIP: 0010:__do_sys_mincore+0xc0/0x2c0 ... Specify valid paths using valid disconnected dentries together with erofs_ishare_mnt instead of leaving f_path empty, so they are more like real backing files in a pseudo filesystem and standard backing_file_open() can be used directly. | ||||
| CVE-2026-80696 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Fix reading the minimum alarm voltage Coverity reports an out-of-bounds access when reading the minimum alarm voltage for the VGPIO channel. Add the missing return statement to fix the problem. | ||||
| CVE-2026-80695 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (sht3x) Fix unaligned accesses Sashiko reports: In sht3x_update_client(), the 16-bit temperature and humidity values are extracted from a stack-allocated byte array using be16_to_cpup(). The pointers passed to this function are calculated as buf and buf + 3. Since the difference between the two pointers is an odd number of bytes, at least one of them is guaranteed to be at an unaligned offset. This will trigger an alignment fault on strict-alignment architectures such as ARMv5 or SPARC, resulting in a kernel panic. Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(), and put_unaligned_be16() instead of cpu_to_be16(). | ||||
| CVE-2026-80694 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq cookie), but mtk_poll_controller incorrectly passed the net_device *. Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled would then crash. | ||||
| CVE-2026-80693 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: idpf: bound interrupt-vector register fill to the allocated array idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding its inner loop only by the per-chunk num_vectors. The array is sized separately: idpf_intr_reg_init() allocates kzalloc_objs(struct idpf_vec_regs, total_vecs) from caps.num_allocated_vectors and only checks the returned count after the fill. The sum of per-chunk num_vectors is never reconciled against total_vecs, so a reply with a small num_allocated_vectors but chunks summing higher writes past the end of reg_vals[]. Impact: a control plane (a PF or hypervisor device model) that returns a VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds num_allocated_vectors writes struct idpf_vec_regs entries past the end of the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write). Bound the fill loop to the array capacity passed in by the callers, mirroring the sibling idpf_vport_get_q_reg(). The existing num_regs < num_vecs check then rejects an undersized reply without the out-of-bounds write happening first. | ||||
| CVE-2026-80692 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-80691 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE In the iblock_execute_pr_out() function, PRO_PREEMPT, PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability checks through ops->pr_clear. The error check allows unimplemented hooks to pass through the gate, resulting dereferencing a NULL function pointer. Check whether the hooks that need to be called are supported. | ||||
| CVE-2026-80690 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL pointer dereference in the device teardown path if ufs_rpmb_probe() fails. | ||||
| CVE-2026-80689 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of __trace_mmiotrace_rw() and __trace_mmiotrace_map(). | ||||
| CVE-2026-80688 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv: drop __init from vec_check_unaligned_access_speed_all_cpus This function runs within a kthread and need not necessarily finish before system finishes boot and free_initmem() unmaps the .init.text section. This function makes calls to SBI for probing unaligned access speed, and if this is slow for some reason (say some debug prints were added to SBI), the kthread can still be running at this point and result in an instruction page fault when trying to fetch from the freed region. [ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8 [ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000 [ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3 [ 25.661244] Oops [#1] [ 25.662997] Modules linked in: [ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY [ 25.674669] Hardware name: Tenstorrent Blackhole (DT) [ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20 [ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000 [ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30 [ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002 [ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000 [ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30 [ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0 [ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402 [ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000 [ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c [ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc [ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4 [ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18 [ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc Drop __init from its signature so that this doesn't happen. | ||||
| CVE-2026-80684 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix NULL dereference on AIBV allocation failure The airq_iv_create() can return NULL on failure, but the return value was never checked. If it fails, zdev->aibv will be NULL and fail when dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the previously allocated AISB bit and zdev->aisb on failure. | ||||
| CVE-2026-80683 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: give the socket its own sco_conn reference sco_conn_del() drops a reference it does not own. It takes one transient reference via sco_conn_hold_unless_zero() and releases it with the sco_conn_put() that follows sco_sock_hold(); the additional put in the !sk branch releases a second one: conn = sco_conn_hold_unless_zero(conn); ... sk = sco_sock_hold(conn); sco_conn_unlock(conn); sco_conn_put(conn); if (!sk) { sco_conn_put(conn); return; } When close() races the controller's Disconnection Complete, sco_chan_del() clears conn->sk and drops the socket's reference while sco_conn_del() is running. sco_conn_del() then sees sk == NULL, its own put drops the count to zero and frees the conn, and the second put writes to the freed kref: BUG: KASAN: slab-use-after-free in sco_conn_put.part.0+0x1a/0x190 Write of size 4 at addr ffff8881099dec74 by task kworker/u17:3/413 Workqueue: hci1 hci_rx_work Call Trace: sco_conn_put.part.0+0x1a/0x190 hci_disconn_complete_evt+0x1ee/0x3e0 hci_event_packet+0x54a/0x650 hci_rx_work+0x321/0x3d0 Allocated by task 413: sco_conn_add+0x72/0x1a0 sco_connect_cfm+0x88/0x670 Freed by task 413: sco_conn_del.isra.0+0x3f/0xf0 hci_disconn_complete_evt+0x1ee/0x3e0 refcount_t: underflow; use-after-free. The root cause is that the socket stores the connection without holding a reference of its own. __sco_chan_add() does: sco_pi(sk)->conn = conn; so the socket borrows whatever reference its caller happened to hold, and the callers paper over that with ad-hoc holds and puts. Give the socket a counted reference instead: __sco_chan_add() takes one and it is released together with the channel (sco_chan_del()) and in sco_sock_destruct(). With the socket holding its own reference, sco_conn_del() no longer needs the extra put and the redundant hold in sco_conn_ready() goes away. Making the socket own its reference means the connection is now actually freed on the error paths of sco_connect() where it used to leak, which in turn runs sco_conn_free() and its hci_conn_drop(conn->hcon). To keep the hci_conn accounting balanced, make that ownership explicit as well: sco_conn_add() consumes one hci_conn reference and the sco_conn owns it for its lifetime. sco_connect() hands over the reference returned by hci_connect_sco() and no longer drops it on the error paths; sco_connect_cfm(), which is not given a reference, takes one with hci_conn_hold() before handing it to sco_conn_add() (and drops it again if the allocation fails); and the explicit hci_conn_hold() in sco_conn_ready() is removed. Every reference then has a single, clear owner. | ||||
| CVE-2026-80682 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv/mm: use physical alignment for vmemmap_start_pfn RISC-V computes vmemmap_start_pfn by rounding phys_ram_base down to VMEMMAP_ADDR_ALIGN. That alignment must therefore be expressed in the physical-address domain. Commit 476849b0fba4 ("riscv/mm: align vmemmap to maximal folio size") attempted to account for the maximal folio alignment by feeding MAX_FOLIO_VMEMMAP_ALIGN directly into VMEMMAP_ADDR_ALIGN. However, MAX_FOLIO_VMEMMAP_ALIGN is measured in bytes of struct page storage, whereas VMEMMAP_ADDR_ALIGN is used to align a physical address. The mask-based compound_info encoding requires pfn_to_page(0) to be naturally aligned to MAX_FOLIO_VMEMMAP_ALIGN. Commit 9f94db4c7eaa ("mm/sparse: check memmap alignment for compound_info_has_mask()") added a check for that requirement and exposed the unit mismatch on systems such as QEMU virt, where the DRAM base is not aligned to MAX_FOLIO_NR_PAGES * PAGE_SIZE. Here is the log: [ 0.000000][ C0] ------------[ cut here ]------------ [ 0.000000][ C0] WARNING: mm/sparse.c:365 at sparse_init+0x58a/0x6fe, CPU#0: swapper/0 [ 0.000000][ C0] Modules linked in: [ 0.000000][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.2.0-rc3-g1d8304bdd65f #2 PREEMPT [ 0.000000][ C0] Hardware name: riscv-virtio,qemu (DT) [ 0.000000][ C0] epc : sparse_init+0x58a/0x6fe [ 0.000000][ C0] ra : sparse_init+0x58a/0x6fe [ 0.000000][ C0] epc : ffffffff86851c88 ra : ffffffff86851c88 sp : ffffffff88807a30 [ 0.000000][ C0] gp : ffffffff8a3bf240 tp : ffffffff88842080 t0 : ff600000ffab6000 [ 0.000000][ C0] t1 : 000000017fab6000 t2 : 65203a6573726363 s0 : ffffffff88807bc0 [ 0.000000][ C0] s1 : 000000000e000000 a0 : 0000000000000007 a1 : 0000000000000000 [ 0.000000][ C0] a2 : 0000000000000002 a3 : ffffffff86851c88 a4 : 0000000000000000 [ 0.000000][ C0] a5 : ffffffff88843080 a6 : 0000000000000003 a7 : 0000000000000000 [ 0.000000][ C0] s2 : ff60000000000000 s3 : 0040000000000000 s4 : 0004000000000000 [ 0.000000][ C0] s5 : ffffffff8a4d92e0 s6 : ff600000ffab55e0 s7 : ffffffff88384d00 [ 0.000000][ C0] s8 : 0000000000000003 s9 : ffffffff88384cc1 s10: ffffffff88384cc0 [ 0.000000][ C0] s11: ffffffff8a4daae0 t3 : ffffffff915e8b20 t4 : ffffffff915e8b20 [ 0.000000][ C0] t5 : ffffffff915e8b20 t6 : ffffffff915e8bc8 ssp : 0000000000000000 [ 0.000000][ C0] status: 0000000200000100 badaddr: ffffffff86851c88 cause: 0000000000000003 [ 0.000000][ C0] [<ffffffff86851c88>] sparse_init+0x58a/0x6fe [ 0.000000][ C0] [<ffffffff8683d396>] mm_core_init_early+0x116/0x1e30 [ 0.000000][ C0] [<ffffffff86801edc>] start_kernel+0xd2/0x848 Convert MAX_FOLIO_VMEMMAP_ALIGN to the equivalent physical alignment before using it in VMEMMAP_ADDR_ALIGN. This keeps the existing round_down() logic while making the resulting vmemmap base satisfy the mask-alignment requirement. | ||||
| CVE-2026-80681 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: re-fetch eth header after route_shortcircuit() Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb). Inside route_shortcircuit(), pskb_may_pull() can be called, which may reallocate skb->head. In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to freed memory, leading to a use-after-free when dereferencing eth->h_dest. Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit(). | ||||
| CVE-2026-80678 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Fix slave registration race and error handling In i2c_imx_reg_slave(), the slave pointer was assigned before pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed, the error path returned without clearing i2c_imx->slave, leaving it non-NULL and causing all subsequent registration attempts to fail with -EBUSY. Additionally, because this driver uses a shared IRQ, the interrupt handler i2c_imx_isr() can execute concurrently and, after acquiring slave_lock, dereference i2c_imx->slave. The previous fix attempt added a lockless i2c_imx->slave = NULL on the error path, but that could race with the ISR under the lock and still cause a NULL pointer dereference. Fix both issues by deferring the assignment of i2c_imx->slave and i2c_imx->last_slave_event to after a successful resume, and by performing the assignment inside the slave_lock critical section. This guarantees that the slave pointer is never left stale on the error path and is always valid when observed by the interrupt handler. | ||||
| CVE-2026-80675 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libbpf: Reject non-exclusive metadata maps in the signed loader The loader verifies map->sha against the metadata hash in its instructions. map->sha is calculated when BPF_OBJ_GET_INFO_BY_FD is called on the frozen map. While the map is frozen, the /signed loader/ must also ensure the map is exclusive, as, without exclusivity (which a hostile host could just omit when loading the loader), another BPF program with map access can mutate the contents afterwards, so the check passes on stale data. With the extra check as part of the signed loader, it now refuses to move on with map->sha validation if the host set it up wrongly. | ||||