Export limit exceeded: 42461 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (42476 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68756 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock blk_mq_{add,del}_queue_tag_set() functions add and remove queues from tagset, the functions make sure that tagset and queues are marked as shared when two or more queues are attached to the same tagset. Initially a tagset starts as unshared and when the number of added queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along with all the queues attached to it. When the number of attached queues drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and the remaining queues as unshared. Both functions need to freeze current queues in tagset before setting on unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions hold set->tag_list_lock mutex, which makes sense as we do not want queues to be added or deleted in the process. This used to work fine until commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset") made the nvme driver quiesce tagset instead of quiscing individual queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in set->tag_list while holding set->tag_list_lock also. This results in deadlock between two threads with these stacktraces: __schedule+0x47c/0xbb0 ? timerqueue_add+0x66/0xb0 schedule+0x1c/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.constprop.0+0x271/0x600 blk_mq_quiesce_tagset+0x25/0xc0 nvme_dev_disable+0x9c/0x250 nvme_timeout+0x1fc/0x520 blk_mq_handle_expired+0x5c/0x90 bt_iter+0x7e/0x90 blk_mq_queue_tag_busy_iter+0x27e/0x550 ? __blk_mq_complete_request_remote+0x10/0x10 ? __blk_mq_complete_request_remote+0x10/0x10 ? __call_rcu_common.constprop.0+0x1c0/0x210 blk_mq_timeout_work+0x12d/0x170 process_one_work+0x12e/0x2d0 worker_thread+0x288/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 __schedule+0x47c/0xbb0 ? xas_find+0x161/0x1a0 schedule+0x1c/0xa0 blk_mq_freeze_queue_wait+0x3d/0x70 ? destroy_sched_domains_rcu+0x30/0x30 blk_mq_update_tag_set_shared+0x44/0x80 blk_mq_exit_queue+0x141/0x150 del_gendisk+0x25a/0x2d0 nvme_ns_remove+0xc9/0x170 nvme_remove_namespaces+0xc7/0x100 nvme_remove+0x62/0x150 pci_device_remove+0x23/0x60 device_release_driver_internal+0x159/0x200 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x112/0x1e0 vfs_write+0x2b1/0x3d0 ksys_write+0x4e/0xb0 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 The top stacktrace is showing nvme_timeout() called to handle nvme command timeout. timeout handler is trying to disable the controller and as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not to call queue callback handlers. The thread is stuck waiting for set->tag_list_lock as it tries to walk the queues in set->tag_list. The lock is held by the second thread in the bottom stack which is waiting for one of queues to be frozen. The queue usage counter will drop to zero after nvme_timeout() finishes, and this will not happen because the thread will wait for this mutex forever. Given that [un]quiescing queue is an operation that does not need to sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list) in blk_mq_del_queue_tag_set() because we can not re-initialize it while the list is being traversed under RCU. The deleted queue will not be added/deleted to/from a tagset and it will be freed in blk_free_queue() after the end of RCU grace period. | ||||
| CVE-2025-68758 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: backlight: led-bl: Add devlink to supplier LEDs LED Backlight is a consumer of one or multiple LED class devices, but devlink is currently unable to create correct supplier-producer links when the supplier is a class device. It creates instead a link where the supplier is the parent of the expected device. One consequence is that removal order is not correctly enforced. Issues happen for example with the following sections in a device tree overlay: // An LED driver chip pca9632@62 { compatible = "nxp,pca9632"; reg = <0x62>; // ... addon_led_pwm: led-pwm@3 { reg = <3>; label = "addon:led:pwm"; }; }; backlight-addon { compatible = "led-backlight"; leds = <&addon_led_pwm>; brightness-levels = <255>; default-brightness-level = <255>; }; In this example, the devlink should be created between the backlight-addon (consumer) and the pca9632@62 (supplier). Instead it is created between the backlight-addon (consumer) and the parent of the pca9632@62, which is typically the I2C bus adapter. On removal of the above overlay, the LED driver can be removed before the backlight device, resulting in: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... Call trace: led_put+0xe0/0x140 devm_led_release+0x6c/0x98 Another way to reproduce the bug without any device tree overlays is unbinding the LED class device (pca9632@62) before unbinding the consumer (backlight-addon): echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind Fix by adding a devlink between the consuming led-backlight device and the supplying LED device, as other drivers and subsystems do as well. | ||||
| CVE-2025-68759 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring() In rtl8180_init_rx_ring(), memory is allocated for skb packets and DMA allocations in a loop. When an allocation fails, the previously successful allocations are not freed on exit. Fix that by jumping to err_free_rings label on error, which calls rtl8180_free_rx_ring() to free the allocations. Remove the free of rx_ring in rtl8180_init_rx_ring() error path, and set the freed priv->rx_buf entry to null, to avoid double free. | ||||
| CVE-2025-68760 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential out-of-bounds read in iommu_mmio_show In iommu_mmio_write(), it validates the user-provided offset with the check: `iommu->dbg_mmio_offset > iommu->mmio_phys_end - 4`. This assumes a 4-byte access. However, the corresponding show handler, iommu_mmio_show(), uses readq() to perform an 8-byte (64-bit) read. If a user provides an offset equal to `mmio_phys_end - 4`, the check passes, and will lead to a 4-byte out-of-bounds read. Fix this by adjusting the boundary check to use sizeof(u64), which corresponds to the size of the readq() operation. | ||||
| CVE-2025-68762 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netpoll: initialize work queue before error checks Prevent a kernel warning when netconsole setup fails on devices with IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in __flush_work) occurs because the cleanup path tries to cancel an uninitialized work queue. When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL, it fails early and calls skb_pool_flush() for cleanup. This function calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been initialized yet, triggering the warning. Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the work queue is properly initialized before any potential failure points. This allows the cleanup path to safely cancel the work queue regardless of where the setup fails. | ||||
| CVE-2025-68763 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Correctly handle return of sg_nents_for_len The return value of sg_nents_for_len was assigned to an unsigned long in starfive_hash_digest, causing negative error codes to be converted to large positive integers. Add error checking for sg_nents_for_len and return immediately on failure to prevent potential buffer overflows. | ||||
| CVE-2025-68765 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add() In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function returns an error without freeing sskb, leading to a memory leak. Fix this by calling dev_kfree_skb() on sskb in the error handling path to ensure it is properly released. | ||||
| CVE-2025-68766 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc() If irq_domain_translate_twocell() sets "hwirq" to >= MCHP_EIC_NIRQ (2) then it results in an out of bounds access. The code checks for invalid values, but doesn't set the error code. Return -EINVAL in that case, instead of returning success. | ||||
| CVE-2025-8872 | 1 Arista | 1 Eos | 2026-04-15 | 6.5 Medium |
| On affected platforms running Arista EOS with OSPFv3 configured, a specially crafted packet can cause the OSFPv3 process to have high CPU utilization which may result in the OSFPv3 process being restarted. This may cause disruption in the OSFPv3 routes on the switch. This issue was discovered internally by Arista and is not aware of any malicious uses of this issue in customer networks. | ||||
| CVE-2025-9365 | 1 Fujielectric | 1 Frenic Loader | 2026-04-15 | 7.8 High |
| Fuji Electric FRENIC-Loader 4 is vulnerable to a deserialization of untrusted data when importing a file through a specified window, which may allow an attacker to execute arbitrary code. | ||||
| CVE-2025-9543 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 3.5 Low |
| The FlexTable WordPress plugin before 3.19.2 does not sanitise and escape the imported links from Google Sheet cells, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup). | ||||
| CVE-2025-9785 | 2026-04-15 | N/A | ||
| PaperCut Print Deploy is an optional component that integrates with PaperCut NG/MF which simplifies printer deployment and management. When the component is deployed to an environment, the customer has an option to configure the system to use a self-signed certificate. If the customer does not fully configure the system to leverage the trust database on the clients, it opens up the communication between clients and the server to man-in-the-middle attacks. It was discovered that certain parts of the documentation related to the configuration of SSL in Print Deploy were lacking, which could potentially contribute to a misconfiguration of the Print Deploy client installation. PaperCut strongly recommends to use valid certificates to secure installations and to follow the updated documentation to ensure the correct SSL configuration. Those who use private CAs and/or self-signed certificates should make sure to copy their Certification Authority certificate, or their self signed certificate if using only one, to the trust store of their operating system and to the Java key store | ||||
| CVE-2025-9821 | 1 Mautic | 1 Mautic | 2026-04-15 | 2.7 Low |
| SummaryUsers with webhook permissions can conduct SSRF via webhooks. If they have permission to view the webhook logs, the (partial) request response is also disclosed DetailsWhen sending webhooks, the destination is not validated, causing SSRF. ImpactBypass of firewalls to interact with internal services. See https://owasp.org/Top10/A10_2021-Server-Side_Request_Forgery_%28SSRF%29/ for more potential impact. Resources https://cheatsheetseries.owasp.org/cheatsheets/Server_Side_Request_Forgery_Prevention_Cheat_Sheet.html for more information on SSRF and its fix. | ||||
| CVE-2025-9822 | 1 Mautic | 1 Mautic | 2026-04-15 | 5.5 Medium |
| SummaryA user with administrator rights can change the configuration of the mautic application and extract secrets that are not normally available. ImpactAn administrator who usually does not have access to certain parameters, such as database credentials, can disclose them. | ||||
| CVE-2025-9823 | 1 Mautic | 1 Mautic | 2026-04-15 | N/A |
| SummaryA Cross-Site Scripting (XSS) vulnerability allows an attacker to execute arbitrary JavaScript in the context of another user’s session. This occurs because user-supplied input is reflected back in the server’s response without proper sanitization or escaping, potentially enabling malicious actions such as session hijacking, credential theft, or unauthorized actions in the application. DetailsThe vulnerability resides in the “Tags” input field on the /s/ajax?action=lead:addLeadTags endpoint. Although the server applies sanitization before storing the data or returning it later, the payload is executed immediately in the victim’s browser upon reflection, allowing an attacker to run arbitrary JavaScript in the user’s session. ImpactA Reflected XSS attack can have a significant impact, allowing attackers to steal sensitive user data like cookies, redirect users to malicious websites, manipulate the web page content, and essentially take control of a user's session within an application by executing malicious JavaScript code within the victim's browser, even if the server-side code is secure; essentially enabling them to perform actions as if they were the logged-in user. References * Web Security Academy: Cross-site scripting https://portswigger.net/web-security/cross-site-scripting * Web Security Academy: Reflected cross-site scripting https://portswigger.net/web-security/cross-site-scripting/reflected | ||||
| CVE-2025-9824 | 1 Mautic | 1 Mautic | 2026-04-15 | 5.9 Medium |
| ImpactThe attacker can validate if a user exists by checking the time login returns. This timing difference can be used to enumerate valid usernames, after which an attacker could attempt brute force attacks. PatchesThis vulnerability has been patched, implementing a timing-safe form login authenticator that ensures consistent response times regardless of whether a user exists or not. Technical DetailsThe vulnerability was caused by different response times when: * A valid username was provided (password hashing occurred) * An invalid username was provided (no password hashing occurred) The fix introduces a TimingSafeFormLoginAuthenticator that performs a dummy password hash verification even for non-existent users, ensuring consistent timing. WorkaroundsNo workarounds are available. Users should upgrade to the patched version. References * https://owasp.org/www-project-web-security-testing-guide/latest/4-Web_Application_Security_Testing/03-Identity_Management_Testing/04-Testing_for_Account_Enumeration_and_Guessable_User_Account | ||||
| CVE-2025-9937 | 1 Elunez | 1 Eladmin | 2026-04-15 | 5.4 Medium |
| A security flaw has been discovered in elunez eladmin 1.1. Impacted is the function deleteFile of the component LocalStorageController. The manipulation results in improper authorization. The attack may be performed from remote. The exploit has been released to the public and may be exploited. | ||||
| CVE-2025-9959 | 1 Huggingface | 1 Smolagents | 2026-04-15 | 7.6 High |
| Incomplete validation of dunder attributes allows an attacker to escape from the Local Python execution environment sandbox, enforced by smolagents. The attack requires a Prompt Injection in order to trick the agent to create malicious code. | ||||
| CVE-2025-23081 | 2026-04-15 | 6.1 Medium | ||
| Cross-Site Request Forgery (CSRF), Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Wikimedia Foundation Mediawiki - DataTransfer Extension allows Cross Site Request Forgery, Cross-Site Scripting (XSS).This issue affects Mediawiki - DataTransfer Extension: from 1.39.X before 1.39.11, from 1.41.X before 1.41.3, from 1.42.X before 1.42.2. | ||||
| CVE-2025-23093 | 2026-04-15 | 8.8 High | ||
| The Platform component of Mitel OpenScape 4000 and OpenScape 4000 Manager through V10 R1.54.1 and V11 through R0.22.1 could allow an authenticated attacker to conduct a privilege escalation attack due to the execution of a resource with unnecessary privileges. A successful exploit could allow an attacker to execute arbitrary commands with elevated privileges. | ||||