Export limit exceeded: 28241 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28241 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90011 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Reserve a terminator byte for the login payload iscsi_target_check_login_request() rejects a login PDU whose DataSegmentLength exceeds MAX_KEY_VALUE_PAIRS, but the test is '>' and login->req_buf is allocated with exactly MAX_KEY_VALUE_PAIRS bytes. Since iscsit_get_login_rx() receives payload_length + padding bytes, where padding = ((-payload_length) & 3); any payload_length from 8189 to 8192 fills the whole 8192 byte buffer. The write stays in bounds, but no byte is left for a NUL terminator. The buffer is subsequently consumed as a C string. In the CHAP path chap_check_algorithm() calls kstrdup(a_str), and extract_param() calls strstr(in_buf, pattern) followed by strlen_semi(), none of which take a length. convert_null_to_semi() additionally rewrites every embedded NUL to ';', so even a payload made of well formed NUL separated key=value records is left without a terminator. These walk past the end of the object into adjacent slab memory. It is reachable by an unauthenticated initiator against a portal configured for CHAP; when authentication is not required iscsi_login_zero_tsih_s2() rewrites AuthMethod to None and the CHAP path is never entered. Allocate one extra byte. kzalloc() zeroes it and nothing ever writes to it, as every writer copies to offset 0 for at most MAX_KEY_VALUE_PAIRS bytes, so the buffer is always terminated. | ||||
| CVE-2026-89981 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: Don't read GMID_EL1 when MTE is disabled __cpuinfo_store_cpu() gates the GMID_EL1 read on the raw ID_AA64PFR1_EL1, so it reads the register even when the kernel has disabled MTE (CONFIG_ARM64_MTE=n or arm64.nomte). KVM sets HCR_EL2.TID5 in that case, and pKVM injects an UNDEF the host cannot handle: Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP pc : __cpuinfo_store_cpu+0xf4/0x264 Kernel panic - not syncing: Attempted to kill the idle task! Only pKVM reaches it, and only after a CPU is offlined and brought back online: its CPU_ON relay sets the host HCR before the CPU enters EL1, while plain nVHE sets it at CPUHP_AP_KVM_ONLINE. Gate the read on the CPU's own ID_AA64PFR1_EL1 with the command-line override applied, and on CONFIG_ARM64_MTE, which no register reflects. The boot CPU stores its registers before init_cpu_features() strips an unsafe override, so clamp against the hardware value here too. | ||||
| CVE-2026-92770 | 2 Goharbor, Linuxfoundation | 2 Harbor, Harbor | 2026-09-18 | 6.5 Medium |
| Harbor through 2.15.2 fails to properly restrict the q query parameter filtering on scanner registration access credentials. Project administrators can exploit fuzzy filtering on the AccessCredential column to recover the scanner adapter secret one character at a time through response row counts. | ||||
| CVE-2026-90042 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scatterlist crypto API, inheriting its requirement that any buffers are in the linear mapping region. However, the messenger client uses kvmalloc() to create buffers for messages, which will occasionally place those buffers in the vmalloc() region when physical memory fragmentation doesn't permit a large enough kmalloc(). The various callers of ceph_fname_to_usr() directly pass (slices of) raw messages from the MDS without considering that the messages may be in vmalloc() buffers, resulting in oopses especially on non-x86 platforms (see 'Closes:' for more details and a reproducer). Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated fname->ctext, fname->name, and/or oname->name buffers, using `tname` (which, when non-null, must be a linear address; when null, is briefly allocated as necessary) as a bounce buffer to avoid passing any inappropriate addresses to fscrypt_fname_disk_to_usr(). Additionally change parse_reply_info_readdir() -- the only function to supply its own `tname` -- to follow the new "tname must never come from vmalloc()" rule by passing NULL when the message is not in the linear region. Though this causes a per-dentry kmalloc()+kfree(), this overhead exists only when processing the minority of messages that spill into vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir messages. Still, if the overhead proves unreasonable in the future, it is easy enough to mitigate: a future change could allocate a bounce buffer in parse_reply_info_readdir() and use that as `tname` instead. | ||||
| CVE-2026-89999 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: validate report length in wacom_intuos_pro2_bt_irq wacom_intuos_pro2_bt_irq() receives the wire report length in `len` but never consults it before parsing. After the report-id gate it unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by features.type, a fixed chain of sub-parsers, none of which receive `len`: wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wacom); wacom_intuos_gen3_bt_battery(wacom); } Each sub-parser dereferences wacom->data at fixed offsets. The furthest byte touched on each branch is: INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285] (the touchring byte), so the report must be at least 286 bytes; INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45], so the report must be at least 46 bytes. features.type is selected from the VID/PID id_table entry and wacom_setup_device_quirks() force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL / ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports whose backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer. This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq") already hardened in the sibling wacom_intuos_bt_irq(), which guards each report id against its minimum length before parsing. Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject reports shorter than the furthest offset the selected branch actually dereferences, warn, and bail out. Because the whole pen/touch/pad/ battery chain runs unconditionally per branch, a single up-front check against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT, 46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on a short report also skips those calls for the same malformed report, which is the safe, conservative behavior. | ||||
| CVE-2026-90034 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: change kmalloc() to kzalloc() Change the kmalloc() calls in usb_mdc800_init() for irq_urb_buffer and download_urb_buffer to kzalloc(), avoiding potential stack leaks if a shorter message is received in mdc800_usb_irq() and mdc800_usb_download_notify() | ||||
| CVE-2026-89971 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: skip the zoned limits update if the zone info query failed nvme_query_zone_info() returns either a negative errno or a positive NVMe status code, but nvme_update_ns_info_block() only tests for the negative case: ret = nvme_query_zone_info(ns, lbaf, &zi); if (ret < 0) goto out; If the device fails the Identify Namespace (I/O Command Set specific) command, or the Identify Controller command issued by nvme_set_max_append(), the positive status falls through and setup continues with the zero-initialized zone info. nvme_update_zone_info() then marks the queue zoned with chunk_sectors and ns->head->zsze set to zero. blk_validate_zoned_limits() does not check chunk_sectors, so the limits commit succeeds. blk_revalidate_disk_zones() does reject the zero zone size, but by then the limits are live and nothing rolls them back, so I/O keeps being submitted to a zoned queue with a zero zone size and disk_zone_no() shifts by ilog2(0): nvme0n1: Invalid non power of two zone size (0) UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16 shift exponent -1 is negative disk_zone_no include/linux/blkdev.h:747 [inline] bio_straddles_zones include/linux/blkdev.h:1058 [inline] blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline] blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605 blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196 submit_bh_wbc+0x575/0x740 fs/buffer.c:2824 __block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933 Any device, firmware or NVMe-oF target that fails this one command reaches this. Skip the zoned limits update in that case, and log which of the two things happened: during a revalidation the queue keeps the zone geometry it was last validated with, and on a first scan the namespace is registered without zoned limits, so that it is still available as a handle for admin commands. Neither of the paths in nvme_query_zone_info() that return a positive status logs anything, so the failure would otherwise be silent. zi.zone_size is an exact indicator: every path that returns a positive status returns before it is assigned, and after that the only failure left is -ENODEV, which the caller already handles. Found by FuzzNvme. | ||||
| CVE-2026-89973 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-18 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: check the data direction of a C2HData PDU nvme_tcp_handle_c2h_data() finds the request by command id and checks that it has a payload, but it does not check that the command asked for data to be read. A controller that answers a write command with C2HData therefore reaches nvme_tcp_recv_data(), where _copy_to_iter() hits WARN_ON_ONCE(i->data_source) and returns 0. The receive path turns that into -EFAULT and resets the controller. No data is copied, so this is not memory corruption. What a controller gets is a kernel warning it can raise at will, which is fatal on a host booted with panic_on_warn. The send path already knows the direction - it consults rq_data_dir() when it builds a command - and nvme_tcp_handle_r2t() checks the length and the offset of the request it names. The C2HData path does not check the direction at all. Reject a C2HData PDU whose command is not a read. Rejecting it fails the command and resets the controller, as the neighbouring check in this function does; what goes away is the warning. [ 6.885580] ------------[ cut here ]------------ [ 6.886457] WARNING: lib/iov_iter.c:193 at _copy_to_iter+0x289/0x1330, CPU#0: kworker/0:1H/71 [ 6.888137] CPU: 0 UID: 0 PID: 71 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.891165] Workqueue: nvme_tcp_wq nvme_tcp_io_work [ 6.891875] RIP: 0010:_copy_to_iter+0x289/0x1330 [ 6.903739] Call Trace: [ 6.904085] <TASK> [ 6.909254] __skb_datagram_iter+0x433/0x820 [ 6.911026] skb_copy_datagram_iter+0x37/0x120 [ 6.911622] nvme_tcp_recv_skb+0xa07/0x4320 [ 6.913378] __tcp_read_sock+0x1ab/0x810 [ 6.915788] nvme_tcp_try_recv+0x152/0x1e0 [ 6.918222] nvme_tcp_io_work+0x1e4/0x6c0 [ 6.926906] </TASK> [ 6.927226] ---[ end trace 0000000000000000 ]--- [ 6.927878] nvme nvme0: queue 1 failed to copy request 0x71 data [ 6.928709] nvme nvme0: receive failed: -14 | ||||
| CVE-2026-89975 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: fix DHCHAP secret leak on parse failure nvmf_parse_options() duplicates dhchap_secret and dhchap_ctrl_secret with match_strdup() before validating the DHHC-1: representation. If validation fails, the parser returns -EINVAL before the temporary string in p is assigned to opts->dhchap_secret or opts->dhchap_ctrl_secret. nvmf_create_ctrl() subsequently frees opts, but nvmf_free_options() cannot release the unassigned temporary string. Each rejected option therefore leaks one allocation. This is easy to miss because valid secrets transfer ownership to opts and are freed normally, while the malformed-secret path still returns the expected -EINVAL to userspace. With CONFIG_NVME_HOST_AUTH enabled, the leak is reachable before the required-option checks and transport lookup. No NVMe-oF target or working transport connection is required; for example, repeatedly writing dhchap_secret=BAD or dhchap_ctrl_secret=BAD to /dev/nvme-fabrics deterministically takes the leaking parse path. Free the temporary string before leaving both validation error paths. Use kfree_sensitive() because the copied option may contain secret material even when its representation is rejected, matching the sensitive cleanup used for stored DHCHAP secrets. | ||||
| CVE-2026-89908 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Preserve memslot arch flags on KVM_MR_FLAGS_ONLY kvm_arch_prepare_memory_region() computes new->arch.flags, i.e. whether a memslot is KVM_MEM_HUGEPAGE_CAPABLE or KVM_MEM_HUGEPAGE_INCAPABLE, only for KVM_MR_CREATE and KVM_MR_MOVE, and returns early for every other change. But the generic code allocates a zeroed memslot for every change and never copies old->arch, so after a KVM_MR_FLAGS_ONLY update, e.g. toggling KVM_MEM_LOG_DIRTY_PAGES for live migration, the active memslot has arch.flags == 0. With both flags clear, fault_supports_huge_mapping() falls through to the alignment check on the HVA range alone, which no longer verifies that the GPA and HVA have the same offset within a PMD. A memslot that was marked KVM_MEM_HUGEPAGE_INCAPABLE because of a GPA/HVA offset mismatch can then be mapped with PMD entries on read faults, and since kvm_map_page() aligns the gfn and the pfn independently, the guest ends up accessing the wrong host pages, exactly the "d -> f, e -> g" case described in the comment above the check. Carry the arch flags over from the old memslot for KVM_MR_FLAGS_ONLY, as the GPA, HVA and size are guaranteed to be unchanged for that case. | ||||
| CVE-2026-89923 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Free guest debug data on vcpu destroy kvm_s390_clear_bp_data() is only called from kvm_arch_vcpu_ioctl_set_guest_debug(), i.e. when user space changes or disables debugging. A vCPU that is destroyed while hardware breakpoints are still armed - the normal case when the VMM just exits or crashes - leaks hw_bp_info, hw_wp_info and all old_data buffers, since generic KVM frees the vCPU right after kvm_arch_vcpu_destroy(). That is bounded by MAX_BP_COUNT entries, so roughly 8 KiB per vCPU, but it is unbounded over VM lifetimes. The allocations are GFP_KERNEL_ACCOUNT, so the charge also outlives the exiting process and pins dying memcgs. Fix by clearing the debug data on vCPU destruction. Calling it unconditionally is fine: struct kvm_vcpu is zero allocated, so for a vCPU that never enabled debugging the counters are 0 and the pointers NULL. | ||||
| CVE-2026-87963 | 2026-09-18 | 8.6 High | ||
| The Yo WordPress plugin from 1.1 through 1.3.1 does not sanitize or parameterize the username request parameter before using it in a SQL query, and reads it before WordPress applies its request escaping, allowing unauthenticated attackers to perform SQL injection and read arbitrary database contents including administrator password hashes. | ||||
| CVE-2026-86446 | 2 Learnpress, Wordpress | 2 Learnpress, Wordpress | 2026-09-18 | 3.7 Low |
| The LearnPress WordPress plugin before 4.4.7 does not restrict the correctness flags it returns when a quiz answer is checked, allowing unauthenticated attackers to obtain the correct answer to every option of a question, along with the instructor's explanation, on courses configured to be taken without enrolling. | ||||
| CVE-2026-87076 | 1 Tanium | 1 Discover | 2026-09-18 | 6.5 Medium |
| Tanium addressed an information disclosure vulnerability in Discover. | ||||
| CVE-2026-81870 | 1 Opentelemetry | 1 Opentelemetry-go | 2026-09-18 | N/A |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 1.5.0 to 1.44.0, sdk/trace.NewTracerProvider emits a TracerProvider created internal Info-level diagnostic event whose MarshalLog implementations recursively include span processor, exporter, and client configuration. Applications that call otel.SetLogger to enable OpenTelemetry internal Info logging can therefore record OTLP gRPC and HTTP collector endpoints, the OTLP HTTP Insecure flag, and complete Zipkin collector URLs. A person or system with access to those logs can learn internal collector topology and can recover credentials or tokens embedded in Zipkin URL user information or query strings. The default OpenTelemetry logger does not emit the event, and this path does not log OTLP authentication headers, TLS key material, or span payloads. This issue is fixed in version 1.45.0. | ||||
| CVE-2026-92947 | 1 Patriksimek | 1 Vm2 | 2026-09-18 | 10 Critical |
| vm2 before 3.11.7 exposes Node's shared Buffer pool to sandboxed code, allowing disclosure of host memory used by Buffer.from, Buffer.concat, and related allocations. Sandboxed code can read and write to host-realm buffers by acquiring ArrayBuffers from small allocations, leading to sensitive data exposure and potential denial-of-service. | ||||
| CVE-2026-92936 | 1 Patriksimek | 1 Vm2 | 2026-09-17 | 5.8 Medium |
| vm2 versions 3.11.0 through 3.11.6 leak absolute host filesystem paths to sandboxed code through error stack formatting. Attacker-supplied code can force the host-realm source transformer to throw a SyntaxError (for example by calling eval with malformed source) and then read the error's .stack property; the bridge forwards the .stack read to the host-realm formatter, bypassing the sandbox-side host-path redaction introduced for GHSA-v27g-jcqj-v8rw. The returned stack string discloses absolute paths from vm2, Node.js internals, and the embedding application's own source tree, along with host function names. Default new VM() and new NodeVM() configurations are affected without any special options, and the issue persists when string eval is disabled because the host-side transformer throws before eval is handled. The impact is information disclosure only; no code execution results. Fixed in vm2 3.11.7. | ||||
| CVE-2026-79259 | 1 Google | 1 Chrome | 2026-09-17 | 4.3 Medium |
| Improper input validation in Safebrowsing in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to bypass system access restrictions via a crafted file. (Chromium security severity: Medium) | ||||
| CVE-2026-79251 | 1 Google | 1 Chrome | 2026-09-17 | 4.3 Medium |
| Improper input validation in Network in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-79192 | 1 Google | 1 Chrome | 2026-09-17 | 4.3 Medium |
| Improper input validation in Variations in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially bypass web origin policy via crafted network traffic. (Chromium security severity: Medium) | ||||