Export limit exceeded: 360013 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360013 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74495 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: igbvf: Fix leak in TX DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented before each frag mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping (the head) would leak. This bug was introduced by a 2010 fix for an endless loop in dma_error. All other affected drivers have already been fixed. | ||||
| CVE-2026-74498 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set When a USB audio endpoint requests full packet transfers via the fill_max descriptor flag, data_ep_set_params() promotes ep->curpacksize to ep->maxpacksize. However, maxsize is left at the original sample-rate derived value. Since u->buffer_size is allocated as maxsize * packets, the resulting DMA buffer is far too small for the requested transfer length. When the USB host controller streams up to curpacksize bytes per packet, it writes past the end of the buffer via DMA, corrupting kernel heap memory. Update maxsize to curpacksize when fill_max is set so that the allocated DMA buffer size matches the actual transfer request size. [ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] | ||||
| CVE-2026-74533 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero hci_conn::iso_data is accessed and modified without lock or RCU. This leads to a race [Task hdev->workqueue] [Task 2] iso_recv iso_conn_put(conn) conn = LOAD hcon->iso_data iso_conn_free(conn) iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL kfree(conn) kref_get_unless_zero(&conn->ref) /* UAF */ and also to races in iso_conn_add() vs. iso_conn_free(). Fix by adding spinlock hci_conn::proto_lock and using it to guard hci_conn::iso_data. | ||||
| CVE-2026-74534 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix refcounting of iso_conn iso_conn_del() and iso_chan_del() have a race that results to double-put of iso_conn: [Task hdev->workqueue] [Task 2] iso_conn_del iso_chan_del iso_conn_hold_unless_zero iso_conn_lock iso_conn_lock conn->sk = NULL iso_conn_unlock sk = iso_sock_hold(conn) <---------´ if (!sk) iso_conn_put iso_conn_put iso_conn_put /* UAF */ The extra put for !sk in iso_conn_del() is currently required since failing iso_chan_add() may leave iso_conn not associated with any sk. Fix by having iso_pi(sk)->conn own refcount when non-NULL, so iso_conn_del does not need to put it. Adjust the iso_conn_add() refcounting so that conn is put if it does not get associated with an sk. | ||||
| CVE-2026-19898 | 1 Victoriametrics | 1 Victoriametrics | 2026-08-15 | 3.7 Low |
| A vulnerability was found in VictoriaMetrics up to 1.146.0. Impacted is the function requestHandler of the file app/vmauth/main.go of the component VMAuth Authentication Endpoint. Performing a manipulation results in improper restriction of excessive authentication attempts. The attack is possible to be carried out remotely. The complexity of an attack is rather high. The exploitability is considered difficult. The exploit has been made public and could be used. Upgrading to version 1.147.0 is recommended to address this issue. The patch is named 119ba0fb5be8024d50c5ba946599b2e69e8803ea. Upgrading the affected component is recommended. | ||||
| CVE-2026-74459 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure es58x_read_bulk_callback() resubmits the RX URB after processing a received packet. If the resubmit succeeds, the URB remains anchored and will be handled by the normal RX path or by teardown. However, if usb_submit_urb() fails, the callback unanchors the URB and then returns directly. This skips the existing free_urb path, so the coherent transfer buffer allocated with usb_alloc_coherent() is not released. Reuse the existing free_urb path after a resubmit failure so that the RX coherent buffer is freed before leaving the callback. | ||||
| CVE-2026-74463 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock Fix a severe AB/BA deadlock between the Common Clock Framework (CCF) and the I2C adapter lock, which triggers when an I2C-controlled clock generator client (like the Si5351) is registered or modified under the CCF. During an i2c client clock (generator) frequency change, the CCF acquires its global 'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's chip registers, stalling for the adapter's I2C bus lock. Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO expander handling LEDs) can hold the I2C adapter lock. Inside this parallel transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host controller's input clock to calculate bus timings. This call attempts to acquire the blocked CCF 'prepare_lock', creating a circular dependency that freezes the system. The jz4780 host controller clock itself is static and never changes at runtime. However, calling clk_get_rate() inside the active transfer path introduces an unnecessary dependency on the CCF internal locks. Eliminate this synchronous clk_get_rate() call from the active transfer path by caching the static host peripheral clock rate once - inside the private jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed() to use this cached value, safely decoupling active I2C transactions from the CCF internal locks without any risk of stale timings. Assisted-by web based Google AI (pinpointing the bug and writing the message). | ||||
| CVE-2026-74473 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() in route_shortcircuit() route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr)) (or ipv6hdr), which checks if bytes are available starting from skb->data. However, in vxlan_xmit(), skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20) only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of IP header), leaving the rest of the IP header potentially un-pulled in non-linear frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled linear buffer length. Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to the length check to ensure the full network header is present in the linear buffer. | ||||
| CVE-2026-74477 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uprobes: Fix NULL pointer dereference in hprobe_expire() Forking a task that has a pending uretprobe can oops the kernel with a NULL pointer dereference in the clone() path: BUG: kernel NULL pointer dereference, address: 0000000000000018 Oops: 0002 [#1] SMP NOPTI RIP: 0010:hprobe_expire CR2: 0000000000000018 Call Trace: uprobe_copy_process copy_process kernel_clone __x64_sys_clone do_syscall_64 entry_SYSCALL_64_after_hwframe This was found on real hosts on Meta fleet. I've got the impression that this is what is happening: CPU 1 CPU 2 (traced task) ----- ------------------- hit uprobe, prepare_uretprobe(): hprobe LEASED, refcount >= 1 uprobe_unregister() put_uprobe(): refcount -> 0 fork() -> dup_utask() hprobe_expire(hprobe, true) try_get_uprobe() -> NULL get_uprobe(NULL) <-- Oops Only take the extra reference when the uprobe is non-NULL; a NULL means it is gone and is the correct value to return. | ||||
| CVE-2026-74480 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp->ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry. | ||||
| CVE-2026-74481 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_reporting: use system_freezable_wq to fix UAF during suspend During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like virtio_balloon reset their underlying virtio devices and delete their virtqueues via vdev->config->del_vqs(). However, page reporting work (page_reporting_process) was scheduled on the global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM freezer skips it, leaving page_reporting_process active during suspend. If pages are freed into the buddy allocator while suspending (for example, when core MM invokes the balloon shrinker during S4 hibernation image saving), page reporting triggers virtballoon_free_page_report() on deleted virtqueues, resulting in a Use-After-Free / General Protection Fault: [ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI [ 196.825967] Workqueue: events page_reporting_process [ 196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring] [ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon] [ 196.946943] page_reporting_process+0x370/0x4f0 Fix this by switching page reporting work to system_freezable_wq. This ensures that the PM freezer pauses page_reporting_process before device drivers destroy their reporting virtqueues. Because the reporting worker is frozen, memory reclamation/freeing (e.g. via shrinker execution) can safely return pages to MM during freeze without triggering unfrozen reporting work on deleted virtqueues. This aligns with the driver's existing design. The comment in virtballoon_freeze() states: /* * The workqueue is already frozen by the PM core before this * function is called. */ Testing: I have verified these fixes using Google’s virtualization infrastructure by running continuous suspend/resume iterations (40+ cycles) while churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60% --timeout 1`) to constantly create free pages for the buddy allocator. We also set the `page_reporting_order` parameter to 0 to make the page reporting worker highly sensitive, forcing it to pick up any 4K free pages. This confirmed that the UAF crashes are no longer reproducible. | ||||
| CVE-2026-74482 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios __folio_split() keeps dereferencing the mapping after the split: shmem_uncharge(mapping->host) and remap_page() while the folios are still frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the after-split folios have been unlocked and freed. Nothing holds an inode reference across that. The split relies on @folio -- which the beyond-EOF drop loop never removes, as it starts at folio_next(folio) -- staying locked and in the page cache to hold off eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read() runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure() passes when splitting a poisoned tail of a shmem THP that reaches past i_size during truncation, it too is gone from the page cache; so once @folio is unlocked no locked, in-cache folio pins the inode, and a concurrent final iput() can evict and RCU-free it before i_mmap_unlock_read() touches i_mmap_rwsem: BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790 i_mmap_unlock_read include/linux/fs.h:537 [inline] __folio_split+0x732/0x1640 mm/huge_memory.c:4100 try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675 memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470 Freed by task 4601: shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177 evict+0x57f/0xac0 fs/inode.c:870 Do every mapping dereference while @folio still pins the inode: drop i_mmap_rwsem right after remap_page(), before the loop that unlocks and frees the after-split folios, and clear @mapping so the exit path does not unlock it again. shmem_uncharge() and remap_page() already run before that point, so after this nothing past the unlock loop touches the inode or the mapping. This is now a rule the split depends on, alongside keeping @folio frozen until the page cache is updated: no inode or mapping dereference once the after-split folios start being unlocked. | ||||
| CVE-2026-74506 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix UAF when sending a message In afs_make_call(), there's a race with async call reception and destruction. If a call is dispatched that doesn't have call->write_iter set (used to specify the data content for FS.StoreData), then the first rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr. Once rxrpc_send_data() queues the last request packet, the response could come in at any time and cause the call to be completed and put. However, afs_make_call() will look at the call again to see it ->write_iter should be handled - something it's only allowed to do if it has its own ref on the call. Whilst this is the case for synchronous calls, it isn't true for async calls such as FS.FetchData. There's also a potential UAF in afs_make_call() in the event that an asynchronous call is being sent, but the call fails in some way (e.g. it gets aborted from the server). The problem there is that afs_make_call() tries to abort a call if the rxrpc send fails, but the asynchronous notification from rxrpc may have caused the afs_call to be torn down. generic/650 plays games with randomly taking CPUs offline, and can interject a significant delay such that the call is deallocated before afs_make_call() gets to check call->write_iter - and a UAF ensues (caught by KASAN). BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs] Read of size 8 at addr ffff888035e050e8 by task fsstress/1409 Fix this by making afs_make_op_call() give the op->call its own ref rather than transferring the caller's ref to it and then dropping the ref when afs_make_call() returns. This also means that the afs_make_call() func never loses its ref on the call now. | ||||
| CVE-2026-74508 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: reject frames without a transaction header hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0] before checking that the L2CAP SDU contains a transaction header. A connected HIDP peer can send an empty basic-mode SDU and make both paths use an uninitialized byte from skb tailroom. KMSAN reports the use in hidp_session_run(), with the uninitialized value originating in __alloc_skb() through vhci_write(). The control path produces two reports and the interrupt path produces one. The byte can also be controlled by a malformed lower-layer packet. If an HCI ACL packet contains an L2CAP PDU with a declared zero-length payload followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to the declared PDU length before dispatch. The current HIDP path nevertheless consumes the extra byte as HIDP_TRANS_HID_CONTROL | HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this change, the same packet is discarded and a subsequent feature report request succeeds. Pull the transaction header with skb_pull_data() and discard frames that do not contain it. | ||||
| CVE-2026-74550 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: do not send ICMP/NDISC Redirects when peer allocation fails When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry under memory pressure or tree size caps, redirect handlers previously fell back to sending un-rate-limited ICMP/NDISC Redirect messages. In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL. In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into inet_peer_xrlim_allow(), which returned true when peer == NULL. Because ICMP/NDISC Redirects are not part of the default global rate limit mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates an un-rate-limited ICMP packet storm. Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and ndisc_send_redirect() when peer is NULL. | ||||
| CVE-2026-74553 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954 ... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220 ? __kasan_kmalloc.constprop.0+0xc9/0xd0 ? __kmalloc_node_track_caller+0x194/0x5b0 ? nct6775_probe+0x936/0x46f0 [nct6775] ? nct6775_probe+0x936/0x46f0 [nct6775] ... Fix the problem by hard-coding the number of temperature and temperature configuration registers to three for NCT6116. Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. | ||||
| CVE-2026-74554 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup() ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is wrong: dp_peer->peer_id for an MLO peer always carries the ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS (256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The intended bitmap entry also never gets cleared, so subsequent ath12k_peer_ml_alloc() calls eventually run out of IDs. The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and is stored in ahsta->ml_peer_id. Use that instead. While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so the bitmap and ahsta->ml_peer_id stay in sync. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74561 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: avoid unlocked f6i_list walk in nh_rt_cache_flush nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop replace without holding nh->lock, racing the unlocked IPv6 route add/delete that mutate the list under nh->lock and free fib6_info entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()): BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243) Read of size 8 at addr ffff888012953e18 by task exploit/146 nh_rt_cache_flush (net/ipv4/nexthop.c:2243) replace_nexthop (net/ipv4/nexthop.c:2610) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) Unlike the other f6i_list walks, this one bumps each route's sernum via fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock around it would invert the established tb6_lock -> nh->lock order and deadlock. As the only purpose is to invalidate cached dsts, bump the IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead, mirroring the rt_cache_flush() already done for IPv4 just above. | ||||
| CVE-2026-74562 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: take nh->lock for f6i_list walks in replace check and notify fib6_check_nh_list() and __nexthop_replace_notify() walk nh->f6i_list during an RTNL-serialized nexthop replace without holding nh->lock. IPv6 RTM_NEWROUTE/RTM_DELROUTE run without RTNL and mutate that list under nh->lock (fib6_add_rt2node_nh(), fib6_purge_rt()), so both walks race a concurrent route delete that unlinks and frees a fib6_info: BUG: KASAN: slab-use-after-free in rt6_fill_node.isra.0 (net/ipv6/route.c:5799) Read of size 4 at addr ffff888014607e64 by task exploit/143 rt6_fill_node.isra.0 (net/ipv6/route.c:5799) fib6_rt_update (net/ipv6/route.c:6412) __nexthop_replace_notify (net/ipv4/nexthop.c:2542) rtm_new_nexthop (net/ipv4/nexthop.c:2554) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) BUG: KASAN: slab-use-after-free in fib6_check_nh_list (net/ipv4/nexthop.c:1605) Read of size 8 at addr ffff888014a7d068 by task exploit/142 fib6_check_nh_list (net/ipv4/nexthop.c:1605) rtm_new_nexthop (net/ipv4/nexthop.c:2575) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) Both walks only read the entries and take no tb6_lock, so protect them with nh->lock; fib6_rt_update() uses gfp_any(), which returns GFP_ATOMIC under the lock. | ||||
| CVE-2026-74564 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH The XT_HASHLIMIT_RATE_MATCH flag mode changes the semantics of the dsthash_ent structure which represents an entry in the hashtable. There is a union area which uses a different layout to express the rate match mode. Update .checkentry path to validate the XT_HASHLIMIT_RATE_MATCH mode flag is requested by two or more different rules that refer to the same hashtable. Otherwise, uninitialized access to the burst field in the union is possible. Reject the use of the XT_HASHLIMIT_RATE_MATCH mode flag if set on by revision less than 3 too. | ||||