Export limit exceeded: 399102 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399102 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98666 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16136: fix unprotected debugfs reads The serial_number file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead. | ||||
| CVE-2026-98667 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: frequency: adf4377: Fully initialize clk_init_data and clk_parent_data The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. adf4377_clk_register() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter is uninitialized, and thus may cause a crash. Similarly, adf4377_clk_register() fills in only parent_data.fw_name, leaving other members of the clk_parent_data structure uninitialized. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-98670 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via schedule_delayed_work(); that work is cleared by a devm callback. Register the devm callback before devm_request_irq() so the devres LIFO teardown frees the IRQ first, ensuring the handler can no longer queue work by the time the workqueue is cleared. Otherwise the handler could re-arm the work and run it after the xadc structure has been freed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98674 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: adi-axi-adc: Initialize state mutex The AXI ADC register access paths serialize transactions with st->lock, but probe does not initialize it. Initialize the mutex before registering the backend. | ||||
| CVE-2026-98677 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix use-after-free on unbind ad_sd_buffer_postenable() allocates sigma_delta->samples_buf with devm_krealloc() at runtime, so its devres entry sits after all probe-time entries of the driver. devm resources are released in reverse allocation order, which means unbind frees samples_buf before iio_device_unregister() disables the buffers and detaches the trigger pollfunc. The data ready IRQ is still enabled at that point, so ad_sd_trigger_handler() can still run and memcpy() incoming samples into the freed samples_buf. Fix this by preallocating the buffer in devm_ad_sd_setup_buffer_and_trigger(), before the triggered buffer and the IRQ are set up, so it is freed only after iio_device_unregister() has drained the trigger handler via free_irq(). Size it for the worst case of all sequencer slots being active; ad_sd_validate_scan_mask() already caps the number of active channels at num_slots. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98680 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kionix-kx022a: Prevent memory leak and fix state The driver allocates memory for samples at buffer enable path. If regmap operation fails in the kx022a_fifo_enable() at the buffer enable path, the allocated memory is never freed. Furthermore, the state information and previous hardware configuration(s) aren't undone, potentially leaving WMI interrupts and buffers enabled, or driver state flags wrong. Free the memory and revert the hardware configuration and state flags on error path. | ||||
| CVE-2026-98681 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races The invalidHandle, swapfile, oplock_break_cancelled, offload, and status_file_deleted fields are stored in the same bitfield byte in struct cifsFileInfo, but are updated in different code paths that may run simultaneously, and are protected by different locks. Since bitfield assignments generate byte-level read-modify-write operations, a modification to one flag can overwrite a concurrent modification to another flag. To avoid these races, convert these flags from a bitfield to separate bool fields. | ||||
| CVE-2026-98682 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: drain and invalidate before server-side copy/clone cifs_file_copychunk_range() and the clone (FICLONE) path of cifs_remap_file_range() do not serialise the destination page cache against the server-side copy the way the other server-side range operations (smb3_zero_range(), smb3_punch_hole(), smb3_collapse_range() and smb3_insert_range()) do. cifs_file_copychunk_range() invalidates the destination range with filemap_invalidate_inode(), which takes and drops the mapping's invalidate_lock internally, so the lock is no longer held when the copychunk ioctl is issued. It also never drains in-flight netfs I/O on the target. The clone path never takes the invalidate_lock at all (only i_rwsem), uses a bare truncate_inode_pages_range() and likewise does not drain outstanding I/O. As a result an asynchronous destination writeback can complete after the server-side copy/clone has run and reinstate stale data over the region just written by the server, corrupting the file. This is the same class of corruption as commit d7d2adcd022b ("smb/client: flush dirty data before punching a hole") and has been seen randomly in generic/363 against Windows Server. Fix both paths to follow the established ordering: hold the target mapping's invalidate_lock across the flush and invalidation of the destination and the server ioctl, and call netfs_wait_for_outstanding_io() on the target to drain in-flight writes before the ioctl is issued. Only the target inode's invalidate_lock is required, as the source is merely flushed and not invalidated; i_rwsem (already held via lock_two_nondirectories()) is acquired before the invalidate_lock, matching the VFS lock ordering. Since filemap_invalidate_inode() takes that same lock internally, replace it with its own unmap/flush/invalidate steps instead of calling it, and return early on a zero-length copy to avoid a range underflow. | ||||
| CVE-2026-98683 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: flush dirty data before zeroing a range smb3_zero_range() emulates FALLOC_FL_ZERO_RANGE by invalidating the page cache over the target range with truncate_pagecache_range() and then issuing FSCTL_SET_ZERO_DATA to the server. Dirty data was only flushed conditionally, when the range reached or extended EOF. For a purely interior zero range that does not reach EOF, no flush happened, so a dirty folio overlapping the range could be written back to the server after the FSCTL and refill the range that was just zeroed with stale data. Fix this by unconditionally flushing and waiting for dirty data in the range before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA, exactly as was done for smb3_punch_hole() in commit d7d2adcd022b ("smb/client: flush dirty data before punching a hole"); the two paths are structurally identical here. This is observed as generic/363 randomly reading stale data where a zeroed range is expected against Windows Server. | ||||
| CVE-2026-98684 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: flush and commit data before querying allocated ranges The mode 0 / FALLOC_FL_KEEP_SIZE fallocate emulation for small interior ranges in smb3_simple_fallocate_range() issues FSCTL_QUERY_ALLOCATED_RANGES and zero-fills any sub-range the server reports as an unallocated hole, to force block allocation without changing file contents. This is unsafe against Windows servers. Per the Win32 documentation, FSCTL_QUERY_ALLOCATED_RANGES only reports ranges that *may* contain nonzero data and is explicitly not coherent with recently written data: "a call to FSCTL_QUERY_ALLOCATED_RANGES [after writing to a network file] would not necessarily return a correct list of allocated regions. To ensure coherency [...] flush the data to the file" fsx (generic/363) reproduces the resulting corruption against Windows Server 2022: a range is written, an uncached read returns the data, yet the next FSCTL_QUERY_ALLOCATED_RANGES on that range reports it as a whole hole, so the emulation overwrites live data with zeroes. A network trace confirmed the WRITE, the READ returning data and the query returning an empty range list within microseconds. Samba does not exhibit this; its query is coherent with the written data. Write back the dirty pages, drain any outstanding I/O and issue an SMB2 FLUSH to force the server to commit the data before querying the allocated ranges, so the query reflects the data actually present. With this, generic/363 passes against both Windows Server 2022 and Samba over 100000 fsx operations. | ||||
| CVE-2026-98602 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: fix out-of-bounds reads on short RX/TX frames and control fallthrough Fix multiple out-of-bounds reads in Bluetooth BNEP frame processing: 1. In bnep_rx_frame() and bnep_ctrl_frame() (net/bluetooth/bnep/core.c), use pskb_may_pull() to verify the BNEP header, control type byte, filter count, and extension headers exist before reading them, and return 0 after handling BNEP_CONTROL instead of falling through to Ethernet frame submission when no extension headers follow. 2. In bnep_net_xmit() (net/bluetooth/bnep/netdev.c), verify skb->len >= ETH_HLEN with pskb_may_pull() before reading the 14-byte Ethernet header to prevent an out-of-bounds heap read and infoleak on short AF_PACKET TX frames. | ||||
| CVE-2026-98606 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: release the GEM object on virtio_gpu_vram_create() errors virtio_gpu_vram_create() frees the object with a bare kfree(vram) on both error paths after drm_gem_private_object_init() has run, and on the second one after drm_gem_create_mmap_offset() has linked obj->vma_node into the device's VMA offset manager. The freed object stays in that interval tree, so a later lookup or insertion walks freed memory, and the dma_resv and gpuva lock are never destroyed. Call drm_gem_object_release() before kfree() on both paths. | ||||
| CVE-2026-98608 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leak in virtio_gpu_resource_create_ioctl() virtio_gpu_resource_create_ioctl() calls drm_gem_object_release() on the drm_gem_handle_create() error path instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, its pages and sg table, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead. | ||||
| CVE-2026-98686 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via zero range smb3_zero_range() removed the pagecache only for the range being zeroed, so when it extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Lower the discard boundary to the smaller of the zero-range offset and the old EOF. | ||||
| CVE-2026-98609 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leak when drm_gem_handle_create() fails virtio_gpu_gem_create() owns the reference taken by virtio_gpu_object_create(). On the drm_gem_handle_create() error path it calls drm_gem_object_release() instead of dropping that reference. drm_gem_object_release() is the inverse of drm_gem_object_init() and does not touch the reference count or call obj->funcs->free(), so it is only correct as the last step of a destructor, as in virtio_gpu_cleanup_object(). Using it here leaves the bo at refcount 1 with no remaining reference, so virtio_gpu_free_object() never runs and the shmem pages, sg table and virtio_gpu_object are leaked. Since virtio_gpu_object_create() has already set bo->created, VIRTIO_GPU_CMD_RESOURCE_UNREF is not queued either, leaking the host-side resource and the resource id. drm_gem_handle_create_tail() drops the handle reference on all of its internal error paths, so the caller only has to drop its own. Use drm_gem_object_put(), matching the success path below. | ||||
| CVE-2026-98612 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: catc: bound the RX packet length in catc_rx_done() catc_rx_done() walks a multi-packet URB, reading a two-byte length from each packet header. Its bound, pkt_len > urb->actual_length, ignores the header offset and compares against the whole transfer rather than the bytes left from pkt_start, so a crafted packet header makes skb_copy_to_linear_data() read past the buffer. A length below ETH_HLEN is also accepted, including zero, and eth_type_trans() then reads a MAC header from the uninitialised tailroom of a shorter skb. The is_f5u011 branch takes its length straight from the transfer, so a zero-length URB reaches the same path. Track the bytes remaining from the current packet, and reject a header that does not fit, a length past what is left, and a length below an Ethernet header. A transfer shorter than an Ethernet header, including a zero-length one, previously became a runt skb passed to netif_rx() and counted as received; it is now counted in rx_length_errors and ends the walk. | ||||
| CVE-2026-98618 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Handle maximum standalone channels Standalone channels use one NAPI vector for each Tx and Rx queue. fbnic's allocation path excludes FBNIC_MAX_TXQS from that layout. A 64-Tx/64-Rx configuration therefore records 128 vectors but allocates only 64, leaving NULL entries that resource setup dereferences. Include the maximum vector count in standalone allocation. | ||||
| CVE-2026-98620 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure If register_netdev() fails for one of the MTK_MAX_DEVS devices in mtk_probe(), the error path jumps to err_deinit_ppe, skipping mtk_unreg_dev(). The previously registered net_devices are then freed by mtk_free_dev() while still in NETREG_REGISTERED state, hitting the BUG_ON(dev->reg_state != NETREG_UNREGISTERED). Route the register_netdev() failure to err_unreg_netdev so the net_devices registered so far are properly unregistered before being freed. | ||||
| CVE-2026-98621 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: gue: reject invalid REMCSUM offsets The REMCSUM option carries an absolute checksum start and checksum field offset. gue_remcsum() passes them to skb_remcsum_process(), whose partial path stores offset - start in the u16 skb->csum_offset variable. If offset is less than start, this underflows. A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM driver which trusts the metadata, leading skb_copy_and_csum_dev() to write two bytes about 64 KiB beyond the destination buffer. Reject reversed tuples in validate_gue_flags(), after the existing length validation, so all GUE parsers enforce the ordering in one place. | ||||
| CVE-2026-98622 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: don't WARN on benign flow_offload_alloc() failure flow_offload_alloc() returns NULL when the conntrack entry is dying (e.g. raced with a conntrack flush) or when the GFP_ATOMIC allocation fails; both are expected under load and neither is a kernel bug. This path runs from softirq on every committed packet, so with panic_on_warn=1 an unprivileged user can panic the box just by racing a conntrack flush against a `tc ... action ct commit` classifier. Reproduced with a custom repro under QEMU: a small, fixed set of UDP flows through `tc filter ... action ct commit` on lo, raced against threads flooding bare ctnetlink CT_DELETE (flush) requests. Hits WARNING: net/sched/act_ct.c:437 (tcf_ct_flow_table_add(), inlined into tcf_ct_act() in this build) within ~15s on the unpatched kernel; same setup is clean on the patched kernel. The fix itself is behavior-preserving: both branches already did `goto err_alloc` before and after, only the WARN is removed. | ||||