Export limit exceeded: 43617 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (43617 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68130 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer destroy_previous_session() until after NTLM authentication In ntlm_authenticate(), destroy_previous_session() is called using a user pointer resolved from the client-supplied NTLM blob username field before the NTLMv2 response is validated. An authenticated attacker can set the NTLM blob username to match a victim account and set PreviousSessionId to the victim's session ID; destroy_previous_session() destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob() subsequently rejects the request with -EPERM. Move destroy_previous_session() and the prev_id assignment to after ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user rather than the pre-authentication lookup result. This matches the ordering already used by krb5_authenticate(), where destroy_previous_session() is called only after ksmbd_krb5_authenticate() returns success. | ||||
| CVE-2026-68129 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix Rx queue stall on alloc failure When the system is under extreme memory pressure, page allocations can fail during the Rx buffer refill loop. If the number of buffers posted to hardware falls below a critical low threshold and the refill loop exits due to allocation failures, the queue can stall: 1. The device drops incoming packets because there are no descriptors. 2. Since no packets are processed, no Rx completions are generated. 3. Because no completions occur, NAPI is never scheduled, preventing the refill loop from running again even after memory is freed. This results in a permanent queue stall. Resolve this by introducing a starvation recovery timer for each Rx queue. If the number of buffers posted to hardware falls below a critical low threshold, start a timer to periodically reschedule NAPI. Once NAPI runs and successfully refills the queue above the threshold, the timer is not rescheduled. The threshold is set to 32 because a single maximum-sized Receive Segment Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path. Lower thresholds (such as 8 or 16) would be insufficient to process a complete maximum-sized RSC packet, risking packet drops or unexpected hardware behavior under memory pressure. Setting the threshold to 32 guarantees a safe margin to handle at least one full RSC packet. | ||||
| CVE-2026-68128 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ice: reject out-of-range ptype in ice_parser_profile_init set_bit(rslt->ptype, prof->ptypes) operates on a DECLARE_BITMAP of ICE_FLOW_PTYPE_MAX (1024) bits. Nothing prevents a malicious VF from providing ptype >= 1024 through VIRTCHNL, resulting in a write past the end of the bitmap and a kernel page fault. Reproduced with a custom kernel module injecting a crafted VIRTCHNL_OP_ADD_RSS_CFG on E810-C QSFP (8086:1592), FW 4.91 0x800214af 1.3909.0, ICE COMMS DDP 1.3.53.0, kernel 7.1.0-rc1. crash_parser: ice_parser_profile_init @ ffffffffc0d61b60 crash_parser: setting ptype=0xffff (max valid=1023) crash_parser: calling ice_parser_profile_init -- expect OOB crash! BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 56 UID: 0 PID: 165011 Comm: insmod Kdump: loaded Tainted: G S U OE 7.1.0-rc1 #1 Hardware name: Intel Corporation S2600BPB/S2600BPB RIP: 0010:ice_parser_profile_init+0x2d/0x1d0 [ice] Call Trace: <TASK> ? __pfx_ice_parser_profile_init+0x10/0x10 [ice] crash_init+0x127/0xff0 [crash_parser] do_one_initcall+0x45/0x310 do_init_module+0x64/0x270 init_module_from_file+0xcc/0xf0 idempotent_init_module+0x17b/0x280 __x64_sys_finit_module+0x6e/0xe0 Bail out early with -EINVAL when ptype is out of range. | ||||
| CVE-2026-68127 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6h (and the iaddr derived from it) again after the csum-adjust call and additionally writes the new locator through that pointer. Impact: a remote IPv6 packet routed through a configured ILA csum-adjust-transport route or receive-side mapping triggers a slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or mapping requires CAP_NET_ADMIN to configure, but trigger packets are unauthenticated once it exists. Reload ip6h after each pskb_may_pull() in ila_csum_adjust_transport() before the csum-diff read. In ila_update_ipv6_locator() only the ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in that case alone before the destination-address write; the neutral-map modes never pull and keep their cached pointers. | ||||
| CVE-2026-68126 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: hold an interface reference across the scan worker mac802154_scan_worker() captures the scanning sub-interface under RCU and then keeps dereferencing sdata->dev after rcu_read_unlock() and outside the rtnl -- in the failure traces, in mac802154_transmit_beacon_req() (skb->dev = sdata->dev), and in the end_scan cleanup. Nothing keeps that netdev alive across the worker iteration. A concurrent DEL_INTERFACE or PHY removal can unregister the interface once the worker drops the rtnl between its two drv_set_channel() sections. unregister_netdevice() frees the netdev asynchronously from netdev_run_todo() with the rtnl already dropped, so neither holding the rtnl nor the per-PHY IEEE802154_IS_SCANNING flag prevents a stale worker iteration from dereferencing the freed netdev -- a KASAN slab-use-after-free, reachable by racing TRIGGER_SCAN against DEL_INTERFACE (both CAP_NET_ADMIN). Pin the netdev with netdev_hold() while the RCU read lock is still held, and release it at every worker exit. | ||||
| CVE-2026-68125 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: reject frames shorter than the authentication tag llsec_do_decrypt_auth() computes the associated-data length for the AEAD request as assoclen += datalen - authlen; where datalen is the number of bytes after the MAC header and authlen (4, 8 or 16) is the length of the authentication tag. Nothing verifies that the frame actually carries at least authlen payload bytes. A secured frame whose payload is shorter than the tag makes datalen - authlen negative; assoclen is then passed to aead_request_set_ad() as an unsigned value close to 4 GiB, so crypto_aead_decrypt() walks far off the end of the scatterlist that only spans the real frame. The frame is fully attacker-controlled and reaches this path from any IEEE 802.15.4 peer in radio range. Reject frames whose payload is shorter than the authentication tag before the subtraction. Dynamically reproduced on a KASAN kernel as a general-protection-fault in the AEAD scatterwalk, and the fix confirmed. | ||||
| CVE-2026-68124 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mctp: serial: handle zero-length frames to prevent rx buffer overflow The MCTP serial receive state machine reads a frame length byte in mctp_serial_push_header() case 2 and validates it upper-bound-only: if (c > MCTP_SERIAL_FRAME_MTU) { dev->rxstate = STATE_ERR; } else { dev->rxlen = c; dev->rxpos = 0; dev->rxstate = STATE_DATA; ... } A length of zero passes this check, so rxlen is set to 0 and the state machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the incoming byte is stored and rxpos incremented before the terminator is dev->rxbuf[dev->rxpos] = c; dev->rxpos++; dev->rxstate = STATE_DATA; if (dev->rxpos == dev->rxlen) { dev->rxpos = 0; dev->rxstate = STATE_TRAILER; } With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is already 1 on the first data byte), so subsequent bytes are written past the end of the fixed 74-byte rxbuf, which is the last member of the netdev private area. Every following data byte is an attacker-controlled 1-byte out-of-bounds heap write, and the overflow continues until a frame (0x7e) or escape byte resets the parser -- effectively unbounded. Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line discipline and bring the resulting mctpserialN netdev up, after which the bytes arrive via the tty receive path. Route a zero-length frame straight to STATE_TRAILER instead of STATE_DATA. The trailer/framing bytes are still consumed, and the frame resolves to a zero-length skb that the MCTP core rejects; the parser never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can no longer occur. KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this change): UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370 index 74 is out of range for type 'u8 [74]' BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf Write of size 1 at addr ... by task kworker/u16:0 mctp_serial_tty_receive_buf tty_ldisc_receive_buf flush_to_ldisc Allocated by task 152: alloc_netdev_mqs mctp_serial_open v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so the trailer/framing bytes are still consumed (Jeremy Kerr). Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68123 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix GSO userspace truncation underflow OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb length in OVS_CB(skb)->cutlen. When a later userspace action segments a GSO skb, queue_gso_packets() reuses that delta for each smaller segment. A segment can then reach queue_userspace_packet() with cutlen greater than skb->len, underflowing the length passed to skb_zerocopy(). Store the maximum preserved length instead and bound each consumer against the current skb length. Use U32_MAX as the no-truncation sentinel so the value remains valid if skb geometry changes before a consumer handles it. | ||||
| CVE-2026-68122 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: fix peer refcount leak in TCP error paths When either the TCP RX or TX error path calls ovpn_peer_hold() followed by schedule_work(&peer->tcp.defer_del_work), and the work item is already pending from the other path, schedule_work() returns false and the work runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put() exactly once, the extra reference taken by the losing path is never dropped, leaking the peer object. The race window: CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error): ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2 schedule_work() <- queued schedule_work() <- NO-OP (work already pending) ovpn_tcp_peer_del_work runs: ovpn_peer_del() ovpn_peer_put() <- refcnt+1 <- peer never freed Fix by checking the return value of schedule_work() in both paths and calling ovpn_peer_put() to drop the extra reference if the work was already pending. ovpn_peer_hold() is kept unconditional in the TX path as it cannot fail at that point. | ||||
| CVE-2026-68121 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pppoe: reload header pointer after dev_hard_header() pppoe_sendmsg() saves a pointer to the PPPoE header before calling dev_hard_header(). Device header callbacks are allowed to reallocate the skb head, invalidating pointers into it. This can happen when a send is blocked in copy_from_user() while the first non-Ethernet port is added to an empty team device. The team's delegated GRE header callback then expands the skb head. PPPoE subsequently writes six bytes through the stale pointer into the freed head. Reload the PPPoE header through the skb's network-header offset after device header creation. pskb_expand_head() updates that offset when it relocates the head. | ||||
| CVE-2026-68120 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtase: Workaround for TX hang caused by hardware packet parsing The hardware performs packet parsing before packet transmission. Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX hang because the hardware parser expects additional protocol header data that is not present in the packet. The hardware performs additional PTP parsing on UDP packets identified by destination ports 319/320 at the expected UDP destination port offset. If such a packet has transport data smaller than RTASE_MIN_PAD_LEN, the hardware parser expects additional packet data and may trigger a TX hang. To avoid these hardware issues, the driver applies the following workarounds. Drop malformed packets that may trigger this hardware issue before transmission. For IPv4 non-initial fragments, the hardware does not check the fragment offset before parsing the expected transport header location. As a result, these packets are still subject to transport header parsing even though they do not contain a transport header. If the transport data is shorter than the minimum transport header required by the hardware parser, pad the transport data to the minimum transport header length required by the hardware parser. Packets that also match the hardware PTP parsing conditions continue to follow the corresponding workaround. For IPv6 fragmented packets, neither of the above hardware issues occurs because the hardware only continues packet parsing when the IPv6 Base Header Next Header field directly indicates UDP. Packets carrying a Fragment Header do not continue through the subsequent packet parsing stages. For packets identified for hardware PTP parsing, pad the transport data so it reaches RTASE_MIN_PAD_LEN before transmission. | ||||
| CVE-2026-68119 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: initialize standalone TCP-AO response padding tcp_v4_send_ack() and tcp_v6_send_response() construct standalone TCP responses with TCP-AO options. The option length carries the actual MAC length, but the TCP header length includes the option rounded up to a four-byte boundary. tcp_ao_hash_hdr() writes the MAC only. Thus, when the MAC length is not four-byte aligned, the one to three bytes after the MAC are left uninitialized and may be transmitted. For the normal TCP-AO hashing mode, those bytes also have to be initialized before computing the MAC. Initialize only the alignment padding in the TCP-AO branches, before hashing the header. Use TCPOPT_NOP, as in the normal TCP-AO output path. This avoids adding work to non-AO TCP responses while preserving a valid authenticated header. | ||||
| CVE-2026-68118 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: challenge ACK for non-exact RST in SYN-RECEIVED The SYN-RECEIVED request-socket path in tcp_check_req() accepts an in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A non-exact RST therefore removes the request instead of eliciting a challenge ACK. RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in SYN-RECEIVED: an exact RST resets the connection, while a non-exact in-window RST must trigger a challenge ACK and be dropped. Apply that check before the ACK-field validation, following the RFC sequence-number, RST, then ACK processing order. Factor the per-netns challenge ACK quota out of tcp_send_challenge_ack() so request sockets can share it. Use the request socket's send_ack() callback and its own out-of-window ACK timestamp to send and rate-limit the response. | ||||
| CVE-2026-68117 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer clears sock->ops before releasing, so tipc_release() is never called. It is not harmless on the accept() path. tipc_accept() creates the pre-allocated child socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then fput()s the new file, so __sock_release() -> tipc_release() runs lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the sk_lock spinlock. tipc_release() already guards this exact "failed accept() releases a pre-allocated child" case with "if (sk == NULL) return 0;", but the guard is bypassed because tipc_sk_create() left sock->sk non-NULL (dangling) rather than NULL. Clear sock->sk on the failed-insert path so the existing tipc_release() NULL check fires and the use-after-free is avoided. The tipc_sk_insert() failure is reached when the per-netns socket rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M elements) -- i.e. once a netns holds ~2M TIPC sockets every insert returns -E2BIG. BUG: KASAN: slab-use-after-free in lock_sock_nested (net/core/sock.c:3839) Write of size 8 at addr ffff8880047cdc38 by task init/1 lock_sock_nested (net/core/sock.c:3839) tipc_release (net/tipc/socket.c:638) __sock_release (net/socket.c:710) sock_close (net/socket.c:1501) __fput (fs/file_table.c:512) Allocated by task 1: sk_alloc (net/core/sock.c:2308) tipc_sk_create (net/tipc/socket.c:487) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) Freed by task 1: __sk_destruct (net/core/sock.c:2391) tipc_sk_create (net/tipc/socket.c:504) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) | ||||
| CVE-2026-68116 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix source list corruption on a failed replace When replacing the source list of an MDB remote entry, all existing sources are first marked for deletion and vxlan_mdb_remote_srcs_add() is then called to add the new source list. Sources present in the new list have their deletion mark cleared, and any sources left marked afterwards are removed. If vxlan_mdb_remote_srcs_add() fails partway through, its error path deletes all entries on the remote's source list. That rollback is only correct for its other caller, vxlan_mdb_remote_add(), where the remote was just allocated and the list contains solely entries added during the call. On the replace path the list also holds pre-existing sources, so a failed replace tears them down together with their (S, G) forwarding entries instead of leaving the entry unchanged. This is reachable from an existing (*, G) remote. An EXCLUDE filter that loses sources starts forwarding traffic that should be blocked, while an INCLUDE filter that loses sources drops traffic that should be forwarded. Mark entries created during the current pass with a new VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear the deletion mark on the pre-existing ones, so a failed replace leaves the source list untouched. Retain the flag until the whole operation succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from deleting a pre-existing entry it only looked up when adding that entry's forwarding entry fails. | ||||
| CVE-2026-68115 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48) | ||||
| CVE-2026-68114 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx12.1: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit e4d99e04b2e9b13b97d3b17804c735f62689db23) | ||||
| CVE-2026-68113 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx12: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit f952076f76d62f783e8ba4995a7c400d39354ccf) | ||||
| CVE-2026-68112 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9.4.3: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c) | ||||
| CVE-2026-68111 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) | ||||