Export limit exceeded: 55960 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (55960 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-129713 2026-11-20 N/A
A stack-based buffer overflow in an unauthenticated CGI handler of the Danfoss AK-SM 8xxA Series controller allows remote attackers to send specially crafted HTTP/S POST requests, leading to memory corruption, webserver restart and hypothetically potential arbitrary code execution with webserver privileges. Authentication is not required to exploit this vulnerability.
CVE-2026-53526 1 Dzikoysk 1 Reposilite 2026-11-20 5.7 Medium
Reposilite is lightweight and easy-to-use repository management software dedicated to Maven-based artifacts in the JVM ecosystem. From 3.5.16 until 3.6.0, as stated by the advisory, the Maven directory-index page interpolates the request URI without HTML escaping in its title, heading, base URL, and parent-directory link. The advisory says the content-embedded ctx.uri() is percent-encoded, preventing tag injection, but that a single quote passes through and breaks the quoted Parent-Directory link; it also says Location.of strips single quotes, so the reachability of the described quote-based trigger remains unresolved. The listing shares the Admin UI origin and does not set the sandbox Content-Security-Policy used for artifact and Javadoc responses, so the reported script execution could access a user's local-storage token. A manager token could enable full instance compromise. The advisory reports version 3.6.0 as fixed.
CVE-2026-61799 1 Netty 1 Netty-incubator-codec-ohttp 2026-11-20 5.3 Medium
netty-incubator-codec-ohttp implements Oblivious HTTP (OHTTP) gateway and client functionality using Netty. Prior to 0.0.23.Final, BinaryHttpParser in codec-bhttp/src/main/java/io/netty/incubator/codec/bhttp/BinaryHttpParser.java accumulates attacker-controlled Binary HTTP variable-length integers into the int offset sumBytes. BinaryHttpParser.readRequestHead, BinaryHttpParser.readFieldLine, and BinaryHttpParser.getIndeterminateLength can narrow long lengths into that offset, causing integer wraparound before buffer indices are calculated. A remote peer that supplies a valid large encoded length to BinaryHttpParser or BinaryHttpDecoder can trigger an unchecked bounds exception from a small malformed message, fail or close the channel, and repeatedly cause denial of service. Java and Netty bounds checks prevent memory corruption, and no information disclosure was observed. This issue is fixed in version 0.0.23.Final.
CVE-2026-133435 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-20 3.7 Low
A flaw was found in Keycloak. When configured with a database that uses case-insensitive collation, Keycloak resolves realm URLs regardless of letter casing. A remote attacker can exploit this behavior by sending requests with alternate letter casing to bypass upstream reverse proxy access controls that rely on case-sensitive path matching. This issue can expose restricted authentication endpoints intended only for internal access, though Keycloak's internal authentication mechanisms remain intact.
CVE-2026-99608 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.6 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Guard the playback copy usx2y_urb_play_prepare() sums the packet lengths of a whole URB, copies that many frames with a single wrap, and sizes each playback packet from the capture packet's actual_length. Three things are unchecked: that the URB fits in the ring buffer, that a packet fits in the playback endpoint's maxpacksize, from which tmpbuf is allocated, and that actual_length is a whole number of frames. The ISO descriptors take the raw actual_length while transfer_buffer_length and the copies take count * stride, so a packet that is not a multiple of the stride makes the descriptors add up to more than the buffer, by up to stride - 1 bytes per packet. Return -EPIPE, as the existing packet-size check does, when the URB is larger than the buffer or a packet is larger than maxpacksize, and size each descriptor from whole frames, so the descriptors add up to transfer_buffer_length and each stays within maxpacksize. The buffer case is prevented by the previous patch and this is the guard for it; the other two depend only on the device. The first case is reachable on the unpatched driver with ordinary packets: on 7.3-rc7, a USB/IP device presenting the US-122 interface layout and sending 48-frame packets, with a 100-frame playback buffer (two 50-frame periods, inside the stock constraints), KASAN reports: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x79b/0x1ac0 Read of size 18446744073709551280 at addr ffff88800e6b02e0 by task vhci_rx/80 With both patches, the same device and a 200-frame playback buffer is refused at hw_params with EINVAL, and a 400-frame buffer plays for 30 s with the position advancing inside the buffer, no KASAN report and neither guard message. The maxpacksize check is not exercised: the emulated device reports the same wMaxPacketSize on both endpoints. The descriptor case is visible with capture packets of 195 bytes at stride 4 (48 frames and 3 bytes): without this change the four descriptors add up to 780 bytes for 768 bytes of data, and USB/IP's completion check refuses the URB ("total length of iso packets 780 not equal to actual length of buffer 768", -EPROTO), after which the driver stops the streams. With this patch every descriptor is 192 bytes, the descriptors add up to the data in every URB for 30 s, the position advances inside the buffer and KASAN reports nothing. The 48-frame playback run above is unchanged.
CVE-2026-133519 1 Ffmpeg 1 Ffmpeg 2026-11-20 5.5 Medium
FFmpeg 7.0 through 9.0.2 contains an out-of-bounds read vulnerability in dvdvideo_menu_next_ps_block() in libavformat/dvdvideodec.c when demuxing DVD menu domains. Attackers can craft a DVD image whose last cell sector and NAV next-VOBU pointer bypass the end-of-cell check, overreading pgc->cell_playback and crashing the process.
CVE-2026-133487 1 Nodejs 1 Undici 2026-11-20 6.3 Medium
A security flaw has been discovered in nodejs undici up to 7.24.0. This affects the function Object.assign of the file balanced-pool.js of the component BalancedPool. The manipulation results in improperly controlled modification of object prototype attributes. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 7.24.1 is able to mitigate this issue. The patch is identified as 0d7ec33ff37563d3e7c98d11d7bca736f330d156. You should upgrade the affected component.
CVE-2026-99574 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.1 Medium
In the Linux kernel, the following vulnerability has been resolved: f2fs: bound the SIT/NAT bitmaps by the checkpoint pack sit_ver_bitmap_bytesize and nat_ver_bitmap_bytesize are used as memcpy lengths into and out of sbi->ckpt, which is sized from cp_payload alone, and nothing compares either length against that allocation. sanity_check_ckpt() has checked these two fields since c77ec61ca0a4, which added them after a crafted image overran build_sit_info(). That check ties each length to a segment count; it never compares either against the allocation, which is the half this adds. Mounting over-reads in build_sit_info() and build_node_manager(), and the first checkpoint writes the same lengths back through the same pointers, so the over-read's contents reach the on-disk checkpoint. An unmount is enough; the filesystem does not have to be used. Bound both ends the way __bitmap_ptr() lays them out. The three branches differ, so a single sum of the two lengths would still admit a small overflow when cp_payload is non-zero.
CVE-2026-99616 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.2 Medium
In the Linux kernel, the following vulnerability has been resolved: ovl: look up the index by the decoded origin A file opened by file handle on an overlay with nfs_export=on can show the stale lower data of a file that was copied up to the upper layer. While the file opened this way stays in the inode cache, a lookup of the copied up file by path fails with ESTALE for all users. The open can also succeed for a file that was removed, where it has to fail with ESTALE. This happens with a handle that has one byte changed. The handle comes from an NFS client, or from a process that calls open_by_handle_at() with CAP_DAC_READ_SEARCH in the initial user namespace. When a file in a lower layer is about to be modified, overlayfs first copies it to the upper layer (copy up). With nfs_export=on, each copy up also creates an entry in the index directory, a directory that overlayfs keeps for itself on the upper filesystem. The handle of an overlay file that comes from a lower layer wraps the handle of its lower inode. Overlayfs calls this lower inode the origin. The overlay handle stays valid after a copy up. To decode such a handle, ovl_lower_fh_to_d() first decodes the wrapped handle to the origin. If no overlay inode is cached for the origin, it looks in the index directory: - An index entry there leads to the upper file. - A whiteout, the marker that overlayfs uses for a removed file, means that the overlay file was removed. The name of an index entry is the handle that copy up encoded for the origin, as a hex string. ovl_lower_fh_to_d() builds the name for this lookup from the bytes that the caller passed in. But handles with different bytes can decode to the same inode: - Overlayfs ignores some flag bits of the handle. - A lower filesystem can accept a different fid type, extra bytes, or generation 0 for any generation. Such a handle decodes to the origin but misses the index entry or the whiteout. So the decode returns an overlay inode that has only the lower file. While that inode is cached, a path lookup of a copied up file fails with ESTALE, since the upper file that the lookup finds does not match the cached inode, which has none. Reproduced on tmpfs and on ext4 with open_by_handle_at(), after a copy up and a mount cycle. A handle in which one flag bit, the fid type, the length or the generation was changed read the old lower data, and path lookups returned ESTALE. Fix this by re-encoding the decoded origin and building the index name from that handle.
CVE-2026-99639 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.3 Low
In the Linux kernel, the following vulnerability has been resolved: ovl: fix whiteout creation in casefolded directories unlink and rmdir fail with EINVAL on an overlay with casefolded (case-insensitive) layers, if the name exists in a lower layer. Casefolded layers need CONFIG_UNICODE. Root can mount such an overlay, and so can an unprivileged user in a user namespace, with tmpfs layers. Overlayfs does not change a lower layer. To remove a name that exists there, it hides the name with a marker file, a whiteout. It creates the whiteout in the work directory, a scratch directory on the upper filesystem, and renames it over the name in the upper directory: - ovl_whiteout() creates the whiteout with mknod, or as a hard link to an earlier whiteout. - ovl_cleanup_and_whiteout() then prepares the rename with start_renaming_two_dentries(), which returns -EINVAL if the source or the target dentry is unhashed, that is, not in the dentry hash table. With casefolded directories, both dentries can be unhashed: - The target. Lookup in a casefolded directory leaves a negative dentry unhashed, so the rename target is unhashed if the name does not exist in the upper directory. - The source, which is the new whiteout. tmpfs hashes a dentry when mknod or link makes it positive, but ext4 does not, so on ext4 the source is unhashed as well. The cleanup after the failure also refuses an unhashed dentry, so on ext4 the whiteout is left behind in the work directory. Reproduced with rm and rmdir on casefolded tmpfs and ext4 layers, also as uid 1000 in a user namespace. Fix this by creating the whiteout with ovl_create_temp(), which repeats the lookup if the new dentry is unhashed. Prepare the rename with start_renaming_dentry(), which looks up the target name with the directories locked. The caller looked the name up without a lock, so return -ESTALE if the name now refers to a different inode. [amir: pass the name used for lookup instead of taking a name snapshot]
CVE-2026-99587 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: reject data-in commands with a data-out buffer SG_IO can submit a data-in SCSI command with DMA_TO_DEVICE. The scatterlist can then contain pages pinned without write access. ata_scsi_rbuf_fill() writes simulated replies to that scatterlist; in the reported case, the copy tried to write the shared zero page and faulted in the kernel. The same mismatch can affect SG_IO commands translated by libata. ZBC IN and GET PHYSICAL ELEMENT STATUS completion handlers can modify the receive buffer even if the drive aborts the command. For ATAPI, the successful INQUIRY completion also rewrites the buffer in atapi_fixup_inquiry(). Reject these mismatched commands before the buffer is written or the command is issued. Report ABORTED COMMAND / DATA IN BUFFER ERROR because the CDB itself can be valid; the supplied transfer direction is wrong.
CVE-2026-99591 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.5 High
In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Force device table to maximum size IOMMU can perform out-of-bounds read of the device table entry (DTE) that is adjacent to the last DTE and falls outside the device table. For example, if the device table can hold 0 to N-1 entries, then the IOMMU can be made to fetch the Nth entry, which falls outside the device table. The device table is owned by the hypervisor (HV) and is assigned in 4KB pages that are contiguous in system physical address (SPA). If the out-of-bound DTE falls on a guest-owned page, then the guest can exploit this bug to setup malicious table walks to corrupt HV pages and/or bring down the system. Note that this bug does not manifest when the device table size is set to its maximum size of 2MB. Therefore, force the device table size to the maximum 2MB on affected processors. These are CPU family 0x17 (Zen1/Zen2) through family 0x1a (Zen5/BRH). This is a mitigation for CVE-2024-21963. kdump reuses the previous kernel's device table only when the size encoded in the IOMMU device-table register matches pci_seg->dev_table_size. A mixed rollout disagrees: the unpatched kernel uses the IVRS-derived size and the patched kernel uses 2MB, so __reuse_device_table() rejects the table. On SNP-capable IOMMUs that rejection panics the kdump kernel. Kernels that both have this patch agree on 2MB and reuse succeeds. Update the production kernel and the crash kernel together.
CVE-2026-99600 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: udf: fix preallocation discarding before an empty allocation extent udf_discard_prealloc() finds the last extent of a file by peeking at the next one with udf_next_aext() and stopping when that returns 0. The peek reads into eloc and elen, and the code then uses them as the last extent. But when udf_next_aext() returns 0 they hold no defined value: if the extent list ends in a continuation descriptor that leads to an empty allocation extent, they describe that continuation, i.e. the block of the empty allocation extent, one block long. The kernel creates such lists itself: when udf_delete_aext() removes the only descriptor of the last allocation extent in a list, it leaves that allocation extent empty and the continuation to it in place. If the last extent is a preallocation, udf_discard_prealloc() deletes it with udf_delete_aext(), which finds the following allocation extent empty, so it also removes the continuation and frees that allocation extent's block. udf_discard_prealloc() then frees eloc and elen: that block a second time, instead of the preallocated blocks. On a space bitmap the preallocated blocks leak and the free block count drifts. On an unallocated space table the second free adds a second free extent for the same block, which is later handed out twice: fsx as run by generic/091 and generic/263 ends up with two parts of its test file in one block and reads back bad data. Peek into separate variables, so that eloc and elen keep the last extent that udf_next_aext() returned with 1.
CVE-2026-99602 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.1 Medium
In the Linux kernel, the following vulnerability has been resolved: udf: don't let the extent type hide an exhausted free-space table extent udf_table_new_block() takes the first block of the free-space table extent closest to the goal. It keeps that extent's type and length together in goal_elen, subtracts one block, and deletes the extent only if goal_elen then reaches zero. UDF 2.60 section 2.3.7.1 requires the free-space extents of an Unallocated Space Entry to be of type 1 (allocated but not recorded), and mkudffs writes them that way. For such an extent the type bits keep goal_elen non-zero, so taking its last block leaves a type-1 extent of length zero behind, starting at the block after the extent, which is in use. The next allocation that picks this empty extent returns that in-use block. Subtracting a block from 0x40000000 then borrows from the type bits, and the extent becomes type 0 with a length of 2^30 - blocksize: about a gigabyte of "free" space overlapping live metadata, the other table extents and whatever lies behind the partition. From then on blocks are handed out twice, or past the end of the partition. Extents that udf_table_free_blocks() adds are type 0, where the check works, so only tables written by mkudffs or by another implementation are affected. Nothing more than filling such a filesystem is needed: on a fresh 1 MiB "mkudffs --space=unalloctable" image, creating empty files until the partition is full writes file entries over the reserve volume descriptor sequence and the backup anchor, and df then reports a negative amount of used space. On syzbot's images the same double allocation is what the two reports below trip over. In the first, ftruncate() extends a new file with enough hole extents to need a chain of allocation extent descriptors; one AED is placed on another inode's file entry, and a later one is placed on the block of the AED currently being filled, which udf_setup_indirect_aext() zeroes, so __udf_add_aext() finds lengthAllocDescs out of step with its cursor. In the second, an AED is placed past the end of the device, sb_getblk() fails, and the error path of udf_do_extend_file() calls udf_truncate_extents() on an extent list that no longer covers i_size. Keep the type separately from the length, as udf_table_prealloc_blocks() already does.
CVE-2026-99609 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.6 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Require a buffer of two URBs usx2y_urb_capt_retire() wraps the ring buffer once per packet and usx2y_urb_play_prepare() once per URB of nr_of_packs() packets of up to 50 frames. Both assume that the data fits in the buffer, and the hw constraints only require about two 1 ms periods, so a packet larger than the buffer on capture, or a URB larger than the buffer on playback, violates that assumption. Constrain SNDRV_PCM_HW_PARAM_BUFFER_SIZE in snd_usx2y_pcm_open() to at least two URBs, 2 * nr_of_packs() * 50 frames, for both directions. The bound is in frames and derived from the driver's own packet limit, so it does not read the endpoint, whose altsetting is only selected in prepare. Two URBs rather than one, because the position advances by a URB on playback and only moves when a URB is less than the whole buffer. Keep a guard in usx2y_urb_capt_retire() that drops a packet larger than the buffer, for the case the constraint makes unreachable. With nrpacks above about 163 (S16_LE) or 109 (S24_3LE) the bound exceeds the 64 KiB buffer the substream preallocates (twice that with the preallocation raised to its 128 KiB maximum), so hw_params fails for those module settings. That is intended: the driver cannot be safe with a URB larger than half the largest buffer. Reproduced on 7.3-rc7 with a USB/IP device presenting the US-122 interface layout and 1024-byte packets into a 512-byte capture buffer: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x1285/0x1ac0 Read of size 18446744073709551104 at addr ffff88800e448800 by task vhci_rx/83 Tested on 7.3-rc7 with the same device, S16_LE at 44100 Hz, nrpacks 4, so the bound is 400 frames. A 128-frame capture buffer and a 200-frame playback buffer are refused at hw_params with EINVAL. A 400-frame buffer streams for 30 s in each direction with the position advancing inside the buffer and no KASAN report; the capture guard did not fire. The same 400-frame capture buffer with S24_3LE, which selects altsetting 2 in prepare, streams for 30 s with the same result.
CVE-2026-99611 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.6 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Reject capture buffers smaller than two packets line6_capture_copy() splits the copy into the ALSA ring buffer once at the buffer end and wraps pos_done once, which is only correct when one packet holds at most buffer_size frames. The packet size comes from the device's endpoint, and the per-device hw structs allow 64-byte periods with periods_min 1, so a packet can be larger than the whole buffer. audio_in_callback() logs an oversized packet and then copies it anyway. The packet size is known at probe time, so constrain SNDRV_PCM_HW_PARAM_BUFFER_BYTES in snd_line6_capture_open() to at least twice the larger of the two endpoints' packet sizes. Two rather than one, because pos_done advances by the packet and wraps once, so a buffer of exactly one packet leaves the position unchanged after every packet. hw_params then rejects a buffer that cannot hold two packets, and the single wrap is valid for every configuration that gets through. Keep a guard in line6_capture_copy() that drops an oversized packet with a ratelimited error, for the case that should no longer be reachable. Reproduced on 7.3-rc7 with a USB/IP device presenting the GuitarPort interface layout and 1024-byte packets into a 128-byte buffer: ALSA logged "invalid position: pos = 224, buffer size = 32" and the driver logged "driver bug: len" on every following packet. With this patch a 1024-byte buffer is refused at hw_params, and a 2048-byte buffer streams for 30 s with no report and with the position moving inside the buffer.
CVE-2026-99617 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: arm64: mm: validate /dev/mem mmap ranges without overflow An arm64 syzkaller reproducer creates a FUSE character device with major:minor 1:1, so opening it uses the /dev/mem file operations. It maps one page from offset 0xfffffffffffff000 at user address zero. The next openat() with a NULL pathname triggers a synchronous external abort (SEA, ESR 0x96000010) in strncpy_from_user() via do_getname(), panicking the kernel. valid_mmap_phys_addr_range() checks the exclusive end by adding the mapping size to the starting address. For this offset, the sum wraps to zero and passes the PHYS_MASK test, allowing an out-of-range PFN to reach remap_pfn_range(). The inclusive-end overflow check in mmap_mem_prepare() does not catch it because the end is ULONG_MAX. Reject starting PFNs outside PHYS_MASK and compare the inclusive length against the remaining physical range without overflowing. This also allows mappings that end exactly at PHYS_MASK, which the old check incorrectly rejects. [catalin.marinas@arm.com: changed the check to look more like __access_ok()]
CVE-2026-99625 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix duplicate dependency fence releases drm_sched_job_add_dependency() consumes its fence reference on success and failure. Do not release the fence again if drm_sched_job_add_dependency() fails. (cherry picked from commit e04f3dfb2071451633e6440a3911a9bb65df9144)
CVE-2026-99636 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.5 High
In the Linux kernel, the following vulnerability has been resolved: net: reject a negative TCP header offset in qdisc_pkt_len_segs_init() qdisc_pkt_len_segs_init() stores skb_transport_offset(), or the inner offset, in the unsigned hdr_len. A header in front of skb->data gives a negative offset. For an offset a little below zero, pskb_may_pull() gets a small length and succeeds. Then a 64-bit kernel reads the TCP header far after the skb and can crash. Further below zero pskb_may_pull() fails. Commit 28a57fb2c5df ("net: iptunnel: fix stale transport header during tunnel decapsulation") fixed one source of such offsets. Other code that removes bytes from the front of a packet can leave the same stale header. Return SKB_DROP_REASON_SKB_BAD_GSO for a negative offset in the TCP branch. SKB_GSO_UDP_L4 and the other GSO types read no header and still get a wrong qdisc_pkt_len(). On a 64-bit kernel only packets that cause the read after the skb today get a new result. Then __dev_queue_xmit() drops them and returns -EINVAL, but sch_handle_ingress() ignores the result. Their content can be valid. Thus the code that leaves the header stale needs its own fix.
CVE-2026-133627 1 Flowintel 1 Flowintel 2026-11-20 N/A
flowintel contains a log injection vulnerability in its case history (audit log) subsystem. The case history is stored as a line-delimited file where each line represents a single event attributed to a specific user. User-controlled fields, including user names, event messages, and case titles used during case merging, were written to the history file without sanitizing embedded line separator characters (such as carriage return, line feed, vertical tab, form feed, and Unicode line/paragraph separators). An authenticated user with the ability to create or modify case history entries could embed line separators in these fields. Upon writing, the injected separators would split a single intended entry into multiple lines, each of which the history format interprets as a distinct event. This allows an attacker to forge additional history entries attributed to arbitrary users, corrupting the audit trail and undermining the integrity of case records. The vulnerability affects the case history append and merge operations. No authentication bypass or privilege escalation is required beyond normal case-management access. Affected versions: flowintel prior to 4.1.0.