Export limit exceeded: 16181 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16181 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64483 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. | ||||
| CVE-2026-64487 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every iteration it advances buf and subtracts the block size while looping on "while (len)". len is urb->actual_length. That value is supplied by the device and is not guaranteed to be a multiple of 16. When a final short block leaves len between 1 and 15, the loop runs once more, reads up to buf[15], and then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows to a huge value. The loop then keeps iterating and walking buf far past the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus block id happens to be hit. Iterate only while a full message block is available. This stops the unsigned underflow and silently drops any trailing partial block, which carries no complete control value anyway. The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1 and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor urb->actual_length before dispatching. | ||||
| CVE-2026-64488 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aoa: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. In layout.c, the function does not check the return value before dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return early if any fails. | ||||
| CVE-2026-64504 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: bmc150: clamp the device-reported FIFO frame count __bmc150_accel_fifo_flush() copies the number of samples the device reports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The frame count is read from the FIFO_STATUS register and only masked to its 7 valid bits: count = val & 0x7F; so it can be 0..127. The only other limit applied to it is the optional caller-supplied sample budget: if (samples && count > samples) count = samples; which does not constrain count on the flush-all path (samples == 0), and leaves it well above 32 whenever samples is larger. count samples are then transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a malfunctioning, malicious or counterfeit accelerometer (or an attacker tampering with the I2C/SPI bus) that reports up to 127 frames writes up to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up to 570 bytes that clobbers the stack canary, saved registers and the return address. Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[] is sized for, before the transfer, mirroring the watermark clamp already done in bmc150_accel_set_watermark(). A well-formed flush reports at most BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. | ||||
| CVE-2026-55971 | 1 Apache | 1 Thrift | 2026-07-30 | 8.4 High |
| Heap-based Buffer Overflow vulnerability in Apache Thrift C++ bindings. This issue affects Apache Thrift: before 0.24.0. Users are recommended to upgrade to version 0.24.0, which fixes the issue. | ||||
| CVE-2026-55707 | 1 Openstack | 1 Neutron | 2026-07-30 | 7.1 High |
| An authorization bypass was found in the OpenStack Neutron subnetpool onboarding API endpoint (PUT /v2.0/subnetpools/{id}/onboard_network_subnets). When a caller supplies a network_id, the API only verifies that the network is visible to the caller but does not verify that the caller owns the subnets on that network. When a network is RBAC-shared or globally shared, any project member with network visibility can invoke the API to onboard another project's subnets into the caller's own subnetpool, mutating the victim's subnet records (setting subnetpool_id to the attacker-controlled pool). If the attacker's subnetpool is associated with an address scope, Neutron syncs the victim's router interfaces with the attacker-controlled address scope, silently altering L3 routing, NAT, and address-scope behavior. The upstream fix adds an ownership check ensuring the caller has admin-or-owner authority over each subnet being onboarded, not merely visibility of the parent network. | ||||
| CVE-2026-47078 | 1 Erlang | 2 Erlang/otp, Erlang\/otp | 2026-07-30 | 4.4 Medium |
| Relative Path Traversal vulnerability in Erlang OTP (stdlib zip module) allows writing files outside the intended extraction directory via a crafted zip archive. zip:unzip/1,2 and zip:extract/1,2 validate entry paths using zip:check_dir_level/2, which tracks directory depth as a running integer counter: .. decrements it, normal path components increment it. The caller rejects only paths where the final counter value is less than zero. A path such as ../x/y causes the counter to go negative mid-traversal then recover to zero, passing validation while resolving to a location outside the extraction directory when joined with the current working directory via add_cwd. This vulnerability is associated with program file lib/stdlib/src/zip.erl. This issue affects OTP from OTP 27.1 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to stdlib from 6.1 before 8.0.3, 7.3.0.1 and 6.2.2.4. | ||||
| CVE-2026-55953 | 1 Erlang | 3 Erlang/otp, Erlang\/otp, Otp | 2026-07-30 | 7.4 High |
| The Erlang/OTP ssl TLS 1.2 (and earlier) and DTLS client does not verify that the cipher suite selected by the server in ServerHello was among the suites offered by the client in ClientHello. The client-side tls_handshake:hello/5 handler validates the negotiated protocol version and the downgrade sentinel but hands the server-chosen suite directly to ssl_handshake:handle_server_hello_extensions/9, which installs it without a membership check. The TLS 1.3 client path performs this check (per RFC 8446), so it is not affected. An on-path attacker between the client and the intended server can respond with a ServerHello selecting an anonymous key exchange suite such as TLS_DH_anon_* or TLS_ECDH_anon_* that the client never offered. Anonymous suites do not require the server to present a certificate, so the entire verify_peer and cacerts configuration is bypassed: the attacker completes the handshake with its own ephemeral parameters, no certificate is validated, no hostname is checked, and ssl:connect returns {ok, Socket}. All subsequent application traffic is readable and modifiable by the attacker. This issue affects OTP from OTP 17.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to ssl from 5.3.4 before 11.7.4, 11.6.0.4 and 11.2.12.11. | ||||
| CVE-2026-43661 | 1 Apple | 6 Ios And Ipados, Ipados, Iphone Os and 3 more | 2026-07-30 | 7.5 High |
| A buffer overflow issue was addressed with improved memory handling. This issue is fixed in iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5, tvOS 26.5, watchOS 26.5. Processing a maliciously crafted image may corrupt process memory. | ||||
| CVE-2026-34908 | 1 Ubiquiti | 31 Efg, Envr, Envr-core and 28 more | 2026-07-30 | 10 Critical |
| A malicious actor with access to the network could exploit an Improper Access Control vulnerability found in UniFi OS devices to make unauthorized changes to the system. | ||||
| CVE-2026-17107 | 1 Redhat | 1 Multicluster Engine | 2026-07-30 | 8.5 High |
| A flaw was found in the cluster-proxy service-proxy component used in Red Hat Advanced Cluster Management for Kubernetes (RHACM) and multicluster-engine (MCE). The service-proxy appends impersonation group headers to proxied requests without first removing caller-supplied values, and the spoke ServiceAccount holds unrestricted impersonation permissions. An authenticated hub principal can inject an Impersonate-Group header to escalate to cluster-admin on every managed cluster. | ||||
| CVE-2026-13776 | 1 Google | 1 Chrome | 2026-07-29 | 9.6 Critical |
| Type Confusion in Dawn in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-13804 | 1 Google | 1 Chrome | 2026-07-29 | 8.3 High |
| Use after free in Chromecast in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-13855 | 1 Google | 1 Chrome | 2026-07-29 | 7.5 High |
| Use after free in Ozone in Google Chrome on Linux prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-14052 | 1 Google | 1 Chrome | 2026-07-29 | 4.3 Medium |
| Insufficient policy enforcement in FileSystem in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to bypass discretionary access control via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-5492 | 1 Drivelock | 1 Drivelock | 2026-07-29 | N/A |
| DriveLock Directory Traversal Information Disclosure Vulnerability. This vulnerability allows remote attackers to disclose sensitive information on affected installations of DriveLock. Authentication is required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 4568 by default. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to disclose information in the context of the service account. Was ZDI-CAN-28713. | ||||
| CVE-2026-5057 | 1 Aten | 1 Unizon | 2026-07-29 | N/A |
| ATEN Unizon RpcProvider Missing Authentication Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of ATEN Unizon. Authentication is not required to exploit this vulnerability. The specific flaw exists within the RpcProvider class. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-29041. | ||||
| CVE-2026-63119 | 1 Modelcontextprotocol | 1 Ruby-sdk | 2026-07-29 | 6.2 Medium |
| MCP Ruby SDK is the official Ruby SDK for Model Context Protocol servers and clients. Prior to 0.23.0, MCP::Server::Transports::StdioTransport and MCP::Client::Stdio in the mcp gem use IO#gets without a byte limit, allowing a peer that sends data without a newline to exhaust process memory. This issue is fixed in version 0.23.0. | ||||
| CVE-2026-18022 | 1 Pgvector | 1 Pgvector | 2026-07-29 | 8.8 High |
| Integer wraparound in IVFFlat index build in pgvector before 0.8.6 allows a database user to write data out-of-bounds, which could lead to arbitrary code execution. Only 32-bit systems are affected. | ||||
| CVE-2026-55628 | 1 Imagemagick | 1 Imagemagick | 2026-07-29 | 5.5 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. In versions prior to 7.1.2-26he, the `-concatenate` operation is missing policy checks, potentially resulting in both reading and writing to paths disallowed by the security policy. This issue has been fixed in version 7.1.2-26. | ||||