Export limit exceeded: 17073 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17073 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-50046 | 1 Nlnetlabs | 1 Unbound | 2026-07-30 | 5.9 Medium |
| In NLnet Labs Unbound 1.15.0 up to and including 1.25.1, the TLS server name used for DNS-over-TLS (DoT) forwarded queries is tied to a struct's ('serviced_query') lifetime but also referenced by another struct ('waiting_tcp'). When the owning struct is jostled out of the mesh while the DoT TCP stream is still handshaking it frees the storage behind the referenced string and if the TLS stream then errors out, it dereferences the freed pointer. The dereference is read-only and the practical impact is a daemon crash resulting in denial of service. A malicious actor that knows a DoT forwarding/stub Unbound's configuration could exploit the vulnerability by quering records in the appropriate zone while keeping Unbound uder pressure so that the jostle logic kicks in. If answers for the vulnerable zone are slow, the likelihood of jostling such queries is higher, although the timing of the jostle needs to be precise. Requirements for a vulnerable Unbound is the existence of a stub/forward zone configured for DoT together with a configured '#authname' suffix on the server identification. The connectivity to the server needs to exhibit a transient failure at the correct time in order to kick off the vulnerable error path. | ||||
| CVE-2026-56444 | 1 Nlnetlabs | 1 Unbound | 2026-07-30 | 5.9 Medium |
| In NLnet Labs Unbound 1.20.0 up to and including 1.25.1, when Unbound is configured with 'serve-expired: yes' and 'serve-expired-client-timeout > discard-timeout > 0' (contrary to the suggested values), the discard-timeout branch during the serve expired logic drops an aged client reply without performing the correct accounting for the number of reply addresses for the query. Other identical branches outside of serve expired perform the correct decrement. Since the counter is never decremented in such scenario, it can reach the maximum limit and new clients for duplicate in-flight queries are silently dropped resulting in degradation of resolution service. A malicious actor can exploit the vulnerability by querying the resolver for a client-controlled slow-on-demand authoritative zone that can drive the counter past the threshold. Shipped defaults for 'serve-expired-client-timeout: 1800' and 'discard-timeout: 1900' make the branch unreachable. | ||||
| CVE-2026-44093 | 2 Phoenix Contact, Phoenixcontact | 8 Charx Sec 3000, Charx Sec 3050, Charx Sec 3100 and 5 more | 2026-07-30 | 7.8 High |
| A local privilege escalation vulnerability in the init-script for user-applications allows a low-privileged local user to execute arbitrary commands as root, resulting in full system compromise. | ||||
| CVE-2026-40714 | 1 Dell | 1 Powerprotect Data Manager | 2026-07-30 | 7.2 High |
| Dell PowerProtect Data Manager, versions prior to 20.2.0.0, contain(s) an Improper Input Validation vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. | ||||
| CVE-2026-17735 | 1 Google | 1 Chrome | 2026-07-30 | 5.7 Medium |
| Insufficient validation of untrusted input in BFCache in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-14899 | 1 Mozilla | 1 Thunderbird | 2026-07-30 | 7.5 High |
| The code to parse MIME headers for display when forwarding a message (if the setting to view all headers was enabled) had an off-by-one error, allowing a single byte to be read from the memory after the buffer for the headers, and potentially crashing Thunderbird. This vulnerability was fixed in Thunderbird 153 and Thunderbird 140.13. | ||||
| CVE-2026-16631 | 1 Publint | 1 Publint | 2026-07-30 | 5.3 Medium |
| A vulnerability was detected in publint up to 0.1.4. This impacts the function child_process.exec of the file src/node/pack.js of the component package-manager Command Handler. The manipulation results in os command injection. Attacking locally is a requirement. The exploit is now public and may be used. The patch is identified as adf2d9a09945fc98c85a2520a89f441d78b2dbd8. It is advisable to implement a patch to correct this issue. The project maintainer explains: "I think it's very rare for someone to use this package with untrusted input". | ||||
| CVE-2026-67246 | 1 Asustor | 1 Adm | 2026-07-30 | N/A |
| A path traversal vulnerability was found in the Wallpaper component of ADM. The vulnerability occurs because user-controlled wallpaper path input is not sufficiently validated before being used for file access. An authenticated attacker can exploit this issue to access or manipulate files outside the intended wallpaper directory, subject to user permissions and filesystem restrictions. Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.RUN1 as well as from ADM 5.0.0 through ADM 5.1.3.RI81. | ||||
| CVE-2026-15370 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-07-30 | 6.7 Medium |
| A flaw was found in libssh. During SFTP server directory listing, the longname field is constructed with unsafe concatenation into a fixed-size stack buffer. When a client causes the server to list attacker-controlled filenames, sufficiently long names can overflow that stack buffer and may lead to crashes or possible code execution on the server. | ||||
| CVE-2026-67245 | 1 Asustor | 1 Adm | 2026-07-30 | N/A |
| A path traversal vulnerability was found in the VPN Clients on the ADM. The vulnerability occurs because user-controlled certificate name input is not sufficiently validated before being used to construct the upload destination path. An authenticated attacker can exploit this issue to write an uploaded certificate file outside the intended VPN certificate directory, subject to process privileges and filesystem permissions. Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.RUN1 as well as from ADM 5.0.0 through ADM 5.1.3.RI81. | ||||
| CVE-2026-44210 | 1 Katacontainers | 1 Kata-containers | 2026-07-30 | 9.9 Critical |
| Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. Versions prior to 3.31.0 ship with a default configuration that allows pod creators to inject arbitrary command-line arguments into the virtiofsd process through the `io.katacontainers.config.hypervisor.virtio_fs_extra_args` pod annotation. By injecting `-o source=/` along with `--no-announce-submounts` and `--sandbox=none`, an attacker can override the virtiofsd shared directory to serve the entire host root filesystem into the guest VM. Combined with the `kernel_params` annotation (also enabled by default) to activate the agent debug console, the attacker can mount the host filesystem from inside the VM and read or write any file on the host, including /etc/shadow. Version 3.31.0 patches the issue. | ||||
| CVE-2026-64559 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Check length in PKEY_VERIFYPROTK ioctl Explicitly check the buffer length request structure provided by user-space and fail, if it exceeds the buffer size. | ||||
| CVE-2026-64557 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb() l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after release_sock(parent). Once the parent lock is dropped the newly enqueued child socket sk is reachable via the accept queue, so another task can accept and free it before the callback dereferences sk, resulting in a use-after-free. Rework the ->new_connection() op so the core, rather than the callback, owns the child channel's lifetime. The op now receives a pre-allocated new_chan and returns an errno instead of allocating and returning a channel. l2cap_new_connection() allocates the child channel and links it into the conn list via __l2cap_chan_add() before invoking the callback, so the conn-list reference keeps the channel alive once release_sock(parent) exposes the socket to other tasks. Channel configuration that was duplicated in l2cap_sock_init() and the various new_connection callbacks is consolidated into l2cap_chan_set_defaults(), which now inherits from the parent channel when one is supplied. | ||||
| CVE-2026-64556 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Detach event groups during remove_on_exec perf_event_remove_on_exec() removes events by calling perf_event_exit_event(). For top-level events, this removes the event from the context with DETACH_EXIT only. This can leave inconsistent group state when a removed event is a group leader and the group contains siblings without remove_on_exec. If the group was active, the surviving siblings can remain active and attached to the removed leader's sibling list, but are no longer represented by a valid group leader on the PMU context active lists. A later close of the removed leader uses DETACH_GROUP and can promote the still-active siblings from this stale group state. The next schedule-in can then add an already-linked active_list entry again, corrupting the PMU context active list. With DEBUG_LIST enabled, this is caught as a list_add double-add in merge_sched_in(). Fix this by detaching group relationships when remove_on_exec removes an event. This preserves the existing task-exit and revoke behavior, while ensuring surviving siblings are ungrouped before the removed event leaves the context. | ||||
| CVE-2026-64555 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops() kvm_hyp_handle_mops() resets the single-step state machine as part of rewinding state for a MOPS exception by modifying vcpu_cpsr() and writing the result directly into hardware. In the case of nested virtualization, vcpu_cpsr() is a synthetic value such that the rest of KVM can deal with vEL2 cleanly. That means the value requires translation before being written into hardware, which is unfortunately missing from the MOPS handler. Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state altogether, which will be resynchronized on the next 'full' exit back to KVM. | ||||
| CVE-2026-64552 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix len check in receive_big() receive_big() bounds the device-announced length by (big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose: add_recvbuf_big() sets sg[1] to start at offset sizeof(struct padded_vnet_hdr) into the first page, so the chain actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) + big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the check allows for the common hdr_len == 12 case. A malicious virtio backend can announce a len in that gap. page_to_skb() then walks one frag past the page chain, storing a NULL page->private into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds write past the static frag array and a NULL frag handed up the rx path. Bound len by the size add_recvbuf_big() actually advertised. | ||||
| CVE-2026-64550 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: validate MAP frame length before ingress parsing When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes the skb straight to __rmnet_map_ingress_handler(), skipping the length validation that rmnet_map_deaggregate() performs on the aggregated path. The parser then dereferences the MAP header and csum header/trailer based on the on-wire pkt_len without checking skb->len, so a short frame is read out of bounds: BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet Read of size 1 at addr ffff88801118ed00 by task exploit/147 Call Trace: ... rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413) __rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96) rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6089) netif_receive_skb (net/core/dev.c:6460) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2001) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Factor that validation out of rmnet_map_deaggregate() into rmnet_map_validate_packet_len() and run it on the no-aggregation path too. The MAP header is bounds-checked first, since this path can receive a frame shorter than the header. | ||||
| CVE-2026-64547 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: net1080: validate packet_len before pad-byte access in rx_fixup For an even packet_len, net1080_rx_fixup() reads the pad byte at skb->data[packet_len] before the skb->len != packet_len check further down, and packet_len is only bounded against NC_MAX_PACKET. A malicious NetChip 1080 device can send a short frame advertising a large even packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the skb: BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14 ... net1080_rx_fixup (drivers/net/usb/net1080.c:384) usbnet_bh (drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3708) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) ... Reject the frame when packet_len >= skb->len before reading. | ||||
| CVE-2026-64545 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net, bpf: check master for NULL in xdp_master_redirect() xdp_master_redirect() dereferences the result of netdev_master_upper_dev_get_rcu() without a NULL check, but that helper returns NULL when the receiving device has no upper-master adjacency. The reach guard only checks netif_is_bond_slave(). On bond slave release bond_upper_dev_unlink() drops the upper-master adjacency before clearing IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window still passes netif_is_bond_slave() while master is already NULL, and faults on master->flags at offset 0xb0: BUG: kernel NULL pointer dereference, address: 00000000000000b0 RIP: 0010:xdp_master_redirect (net/core/filter.c:4432) Call Trace: xdp_master_redirect (net/core/filter.c:4432) bpf_prog_run_generic_xdp (include/net/xdp.h:700) do_xdp_generic (net/core/dev.c:5608) __netif_receive_skb_one_core (net/core/dev.c:6204) process_backlog (net/core/dev.c:6319) __napi_poll (net/core/dev.c:7729) net_rx_action (net/core/dev.c:7792) handle_softirqs (kernel/softirq.c:622) __dev_queue_xmit (include/linux/bottom_half.h:33) packet_sendmsg (net/packet/af_packet.c:3082) __sys_sendto (net/socket.c:2252) Kernel panic - not syncing: Fatal exception in interrupt The missing check dates back to the original code; commit 1921f91298d1 ("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master") later added the master->flags read where the fault now lands but kept the unconditional deref. Check master for NULL before use; a NULL master is treated the same as one that is not up. | ||||
| CVE-2026-64543 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix use-after-free of the discoverer in tipc_disc_rcv() bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(), but tipc_disc_rcv() still dereferences b->disc in RX softirq under rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv). L2 bearers are safe thanks to the synchronize_net() in tipc_disable_l2_media(), but the UDP bearer defers that call to the cleanup_bearer() workqueue, so the discoverer is freed with no grace period: BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149) Read of size 8 at addr ffff88802348b728 by task poc_tipc/184 <IRQ> tipc_disc_rcv (net/tipc/discover.c:149) tipc_rcv (net/tipc/node.c:2126) tipc_udp_recv (net/tipc/udp_media.c:391) udp_rcv (net/ipv4/udp.c:2643) ip_local_deliver_finish (net/ipv4/ip_input.c:241) </IRQ> Freed by task 181: kfree (mm/slub.c:6565) bearer_disable (net/tipc/bearer.c:418) tipc_nl_bearer_disable (net/tipc/bearer.c:1001) The bearer is freed with kfree_rcu(); free the discoverer the same way. Add an rcu_head to struct tipc_discoverer and free it and its skb from an RCU callback. Because the RCU callback (tipc_disc_free_rcu) lives in module text, a call_rcu() that is still pending when the tipc module is unloaded would invoke a freed function. Add an rcu_barrier() to tipc_exit() after the bearer subsystem has been torn down, so all pending discoverer callbacks have run before the module text goes away. Reachable from an unprivileged user namespace: the TIPCv2 genl family is netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC and CONFIG_TIPC_MEDIA_UDP. | ||||