Export limit exceeded: 397790 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397790 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98589 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject pkt arguments in mutating subprogs The verifier tracks changes in how PTR_TO_PACKET registers' bounds are modified across subprog boundaries. PTR_TO_PACKET registers are actually passed as PTR_TO_MEM, which is assumed valid for the entire call. This is not the case with packet memory, where a pskb_* call may invalidate its memory region. Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET because we would also need to somehow pass the PTR_TO_PACKET_META or PTR_TO_PACKET_END to the subprog. Since we cannot avoid representing the pointer in the subprog as PTR_TO_MEM, only permit it if the subprog is guaranteed not to mutate the packet. | ||||
| CVE-2026-98588 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject max_entries > INT_MAX in sock_map_alloc sock_map_alloc() only rejects max_entries == 0 and otherwise allows any u32 value. sock_map_free() then walks the sks[] array with a signed int iterator: int i; for (i = 0; i < stab->map.max_entries; i++) struct sock **psk = &stab->sks[i]; When a SOCKMAP is created with max_entries = 0xffffffff (UINT_MAX), the allocation of 32 GiB can succeed on large-memory hosts. During free the counter reaches 0x80000000, wraps to INT_MIN, is sign-extended by movslq and turned into a ~16 GiB negative offset from stab->sks, pointing far below the allocation. The faulting access is an xchg() write in sock_map_free(). Without KASAN, the same out-of-bounds write can fault on an unmapped vmalloc page or corrupt an unrelated allocation if that vmalloc address is populated. On a KASAN kernel with CONFIG_KASAN_VMALLOC=y, the shadow check for that address hits an unmapped shadow page and oopses first: BUG: unable to handle page fault for address: fffff521b59c5a00 RIP: 0010:kasan_check_range+0x107/0x190 Call Trace: sock_map_free+0x93/0x190 map_create+0x68d/0xb30 __sys_bpf+0x21e/0x2e70 Vmcore confirmed stab->map.max_entries == 0xffffffff, stab->sks == 0xffffc911ace2d000, and the faulting address sks + (s64)INT_MIN * 8 exactly at 0xffffc90dace2d000. The same buggy path is reached on the normal close()/bpf_map_free_deferred() path whenever such a map is destroyed. sock_map_alloc() used to bound its allocation size through bpf_map_charge_init(), but the bound was dropped when rlimit-based memory accounting was removed. Reject max_entries > INT_MAX at creation time so the signed iterator in sock_map_free() never sees a value that would overflow. Triggered by syzkaller and reproduced on both a 6.6-based KASAN kernel and the upstream v7.3-rc2 kernel. | ||||
| CVE-2026-98587 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firewire: cdev: fix back-transition for iso_resource_auto client resource The todo member of iso_resource_auto structure represents the state of the client resource and normally transitions in the following order: ISO_RES_AUTO_ALLOC -> ISO_RES_AUTO_REALLOC -> ISO_RES_AUTO_DEALLOC However, concurrent access from the work item and the file descriptor release function can cause the state to transition backwards from ISO_RES_AUTO_DEALLOC to ISO_RES_AUTO_REALLOC. Prevent the back-transition by checking the current state before updating it in the work item. | ||||
| CVE-2026-98586 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: hold asoc or transport before mod_timer() in timer handlers Take the association or transport reference before rearming a timer in the timer handlers. The existing code calls mod_timer() before taking the reference needed by the rearmed timer without holding the sock lock. This creates a race with timer cleanup: if the timer is deleted after mod_timer() returns but before the reference is taken, the cleanup path can drop the timer's reference and destroy the transport or association. The timer handler then takes a reference on the already freed object and eventually drops it, causing a refcount underflow. Hold the object before mod_timer() and drop the reference if mod_timer() reports that the timer was already pending in timer handlers. Apply the same ordering to the proto-unreachable path, which can rearm a transport timer outside the timer handlers without holding the sock lock. | ||||
| CVE-2026-98585 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Avoid rounding zero ring sizes roundup_pow_of_two() is undefined for zero. ethtool permits a zero ring size to reach the driver, where the minimum-size check should reject it. Leave zero unchanged while rounding nonzero ring sizes. The minimum-size check then rejects zero deterministically without changing the established behavior for other values. | ||||
| CVE-2026-98584 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix potential stack infoleak in em_text_dump() em_text_dump() allocates struct tcf_em_text on the stack without zeroing it. strscpy() writes the algorithm name and a NUL terminator into conf.algo[], leaving the remaining bytes uninitialised. nla_put_nohdr() then copies the full struct to the netlink response. KMSAN on Linux 7.2-rc6 reports two kernel-infoleak splats from this path, one triggered via "tc filter show" and one via a raw RTM_GETTFILTER dump: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1c9/0x2620 nla_put_nohdr+0x83/0x130 em_text_dump+0x291/0x550 Local variable conf created at: em_text_dump+0x5d/0x550 Bytes 168-179 of 199 are uninitialized I am not certain whether this constitutes a real security problem in practice: the test was conducted in a controlled KMSAN environment and the leaked stack bytes may or may not carry sensitive data on actual production kernels. I am reporting it because KMSAN flagged it as a kernel-infoleak and the fix is straightforward. I can provide a userspace reproducer on request. The original code used strncpy() which zero-pads to the destination size. Commit b04202d6065c ("net/sched: replace strncpy with strscpy") replaced it with strscpy(), which does not pad, creating this condition. Zero-initialising the struct closes it. | ||||
| CVE-2026-98583 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: validate helper command length before pull The firmware download receive path removes the NCI data header and reads the helper command before validating the remaining packet length. A short frame can therefore reach the data access before the malformed packet is rejected. Validate the complete helper command length before stripping the NCI data header. | ||||
| CVE-2026-98582 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate received frame size st21nfca_hci_i2c_repack() trims a received frame at its EOF marker before removing byte stuffing. It then assumes the truncated frame contains the LLC header and two CRC bytes, and it unconditionally reads the byte after an escape marker. A malformed frame can place EOF immediately after the start marker or can end its data portion with an escape marker. The former leaves too few bytes for check_crc(), while the latter makes the unstuffing loop read past the current skb length. Require the minimum framing bytes both before and after unstuffing. Use separate input and output cursors while removing byte stuffing, and reject an escape marker without its encoded byte. This keeps malformed frames within the received frame boundary before CRC processing. | ||||
| CVE-2026-98581 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix list corruption / refcount desync in nfc_llcp_recv_dm() nfc_llcp_recv_dm() handles DM(NOBOUND)/DM(REJ) for a socket that is still linked on local->connecting_sockets: it looks the socket up with nfc_llcp_connecting_sock_get(), sets sk->sk_state = LLCP_CLOSED and returns, without taking the socket lock and without unlinking the socket from the connecting_sockets list. llcp_sock_release() selects the list to unlink from by sk_state: a socket in LLCP_CONNECTING is unlinked from connecting_sockets, otherwise from the sockets list. Because recv_dm left the socket physically on connecting_sockets but in the LLCP_CLOSED state, release() takes the else branch and calls nfc_llcp_sock_unlink(&local->sockets, sk). That runs sk_del_node_init() while holding sockets.lock, i.e. it removes the socket from the connecting_sockets hlist under the wrong lock. A concurrent connect() linking another socket onto connecting_sockets under connecting_sockets.lock then mutates the same hlist unserialized, which corrupts the list and desyncs the sk_add_node()/sk_del_node_init() sock_hold()/__sock_put() pairing. An unprivileged local process holding LLCP sockets, with the DM supplied by the remote peer over an established LLCP link, can drive this to leak kernel sockets without bound (the mis-decrement goes through the non-freeing __sock_put() path, so the object is never released), leading to memory exhaustion / DoS. This is the same class of bug that was fixed in the sibling handler nfc_llcp_recv_cc() by commit b493ea2765cc ("nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc()"); recv_dm did not receive the equivalent fix. Fix it the same way: take lock_sock(), re-check that the socket is still hashed (release() may have won the race), and for the NOBOUND/REJ case unlink it from connecting_sockets before moving it to LLCP_CLOSED. The unlink drops the connecting_sockets membership reference via sk_del_node_init(), leaving the socket unhashed, so the later nfc_llcp_sock_unlink() in llcp_sock_release() becomes a no-op and no double put occurs. | ||||
| CVE-2026-98580 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix race condition in accept_queue lifecycle In nfc_llcp_socket_release(), sockets and listener accept queues are walked under the local sockets rwlock and bh_lock_sock(). However, bh_lock_sock() does not synchronise against process-context lock_sock() held by nfc_llcp_accept_dequeue() during accept(). Because socket_release() does not check sock_owned_by_user(), both paths can concurrently unlink and release the same child socket, resulting in use-after-free or a NULL pointer dereference of child->parent in nfc_llcp_accept_unlink(). Fix this synchronisation race by having nfc_llcp_socket_release() use process-context lock_sock() instead of bh_lock_sock(): 1. Pop sockets from the local sockets list under the write lock using nfc_llcp_sock_list_pop() so lock_sock() can be acquired without holding the rwlock. 2. Because lock_sock() can sleep, defer the final release of the nfc_llcp_local structure to a workqueue (release_work). This avoids a sleeping-in-atomic bug when the last local reference is dropped from softirq context. Additionally, hold a single device reference on local from registration until final destruction. 3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent resurrecting a local object whose teardown has been scheduled. 4. In llcp_sock_accept(), verify that the listener socket state is still LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if the listener is closed concurrently. 5. When unlinking unaccepted child sockets during listener release, unlink them from local->sockets, call sock_orphan(), and drop their initial sk_alloc creation reference via sock_put(). 6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with a NULL check. | ||||
| CVE-2026-98579 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure nfc_genl_llc_sdreq() builds a list of TLV nodes while walking nested netlink attrs, but 3 error paths (nested-attr parse failure, TLV alloc ENOMEM, nfc_llcp_send_snl_sdreq() failure) all skip freeing what was already queued. Route them through a new free_list label, mirroring the SDRES path in the same file which already does this. Harmless on the success path too -- send_snl_sdreq() drains the list as it moves nodes, so it's already empty by the time free_list runs. | ||||
| CVE-2026-98578 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ISO15693 inventory length The ISO15693 inventory helper removes a two-byte prefix without checking that it exists, then accepts a one-byte remainder before reading data[1] as the DSFID. Require the prefix and at least two remaining bytes before copying the UID data and reading the DSFID. | ||||
| CVE-2026-98577 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix WKS SAP hijacking via prefix match in nfc_llcp_wks_sap() nfc_llcp_wks_sap() compares only service_name_len bytes, so a short service_name like "u" matches longer WKS strings like "urn:nfc:sn:snep". Fix by requiring exact length match before strncmp(). | ||||
| CVE-2026-98576 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix slab-out-of-bounds reads when logging service names nfc_llcp_wks_sap() and nfc_llcp_build_sdreq_tlv() pass non-null- terminated strings to pr_debug() using the %s format specifier. The buffers are allocated via kmemdup() or come from netlink attributes and are not guaranteed to be null-terminated, causing __dynamic_pr_debug() to read beyond the allocated region: KASAN: slab-out-of-bounds Read in __dynamic_pr_debug Fix both call sites by using %.*s with the explicit length to limit the output to the actual length of the string. | ||||
| CVE-2026-98575 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid() frame->ccid.datalen is read directly from the USB response frame and used, unchecked, as an index into frame->data[]. A malicious or malfunctioning device can set this field to an arbitrary value, causing the driver to read far outside the received buffer. Bound ccid.datalen against the maximum possible ACR122 frame size before using it. This replaces the existing datalen == 0 check, since datalen < 2 already covers that case and additionally rejects datalen == 1, which would still underflow the "datalen - 2" offset used below. | ||||
| CVE-2026-98574 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: stop Tx NAPI before disabling the queues bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend() both disable the Tx queues first and stop Tx NAPI several steps later. A completion in flight calls netif_tx_wake_queue() in between, and nothing stops the queue again, so a transmit can reach the rings after they have been freed. Close is safe because dev_deactivate_many() stops the qdisc first. bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both paths. KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend freezes user space before the callback runs: BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258 Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14 bcmgenet_xmit+0x17f8/0x2258 dev_hard_start_xmit+0x13c/0x588 sch_direct_xmit+0x108/0x340 __dev_queue_xmit+0x1190/0x3848 | ||||
| CVE-2026-98573 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max argument and passes the result to __pskb_pull_tail() as a signed int. The function does not ensure that max is at least skb_headlen(skb). This can happen while parsing IPv6 extension headers when an skb already has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data beyond the linear area, max - skb_headlen(skb) wraps and is converted to a negative delta. __pskb_pull_tail() then passes that negative length to skb_copy_bits(), where it can become a very large copy length. Pass the requested length itself as the pull bound at the three extension-header call sites, so the delta can no longer go negative. | ||||
| CVE-2026-98572 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix immediate JMP JEQ/JNE on MIPS32 An addu instruction was emitted instead of addiu, causing the immediate value 1 to be interpreted as register $at. This made the comparison result invalid when the immediate operand was negative. Note that $at is mapped to BPF_REG_AX, which is used for constant blinding. Fix the instruction to use the immediate form. Found with test_bpf on MIPS32r1 emulated by QEMU. | ||||
| CVE-2026-98571 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: clear stale buf->page after recycling on skb build failure In stmmac_rx(), when napi_build_skb() fails the descriptor page is recycled back to the page pool with page_pool_recycle_direct(), but buf->page is left pointing at the recycled page, unlike every other consumption site in the function which clears the pointer after handing the page away. With the stale pointer stmmac_rx_refill() skips the replacement allocation and programs the already-recycled page back into the RX descriptor. Clear buf->page on the napi_build_skb() failure path to keep the buffer lifecycle consistent with the other consumption sites. | ||||
| CVE-2026-98570 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller rather than each call site in turn. | ||||