Export limit exceeded: 28388 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28388 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93120 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: fix out-of-bounds read of qw_sign os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input length to utf16s_to_utf8s(), but that argument counts UTF-16 code units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[]. The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the conversion reads up to 7 units (14 bytes) past the end of qw_sign[] into the following members of struct gadget_info when the stored signature fills the array without a NUL terminator, exposing those bytes through the configfs attribute. The store path halves the count for its input bound but passes the full byte count as the utf8s_to_utf16s() output limit; use the destination code-unit count in both directions. | ||||
| CVE-2026-92496 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Avoid buffer overread in ath11k_wmi_tlv_op_rx() Currently, in ath11k_wmi_tlv_op_rx(), the firmware buffer is read without first verifying that the buffer has enough data to hold a header. This could result in a buffer overread. Add an upfront length check before dereferencing skb->data as a wmi_cmd_hdr. The check is placed before the trace_ath11k_wmi_event() call to preserve the existing trace semantics (tracing the full raw WMI event including the header), unlike the analogous ath12k fix which could use skb_pull_data() directly. Compile tested only. | ||||
| CVE-2026-90382 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt76x02: do not WARN on invalid rx descriptor length The MPDU length in the rx descriptor comes from the hardware. In monitor mode with the fcsfail filter enabled, the hardware passes up corrupted frames, and a corrupted frame can report a length larger than the received buffer. The bounds check correctly discards such frames, but its WARN_ON_ONCE wrapper means any over-the-air garbage frame taints the kernel, and panics it on the first such frame when panic_on_warn is set. Drop the WARN and discard the frame silently, matching what commit c2d4c8723dbf ("mt76x2: remove some harmless WARN_ONs in tx status and rx path") did for the neighboring rx and tx status paths. Observed immediately on rx with an MT7612U in fcsfail monitor mode on a busy channel. | ||||
| CVE-2026-90344 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: disconnect on CSA to channel 0 The refactor for the CSA parsing erroneously equates channel zero and no information present, leading it to ignore a CSA on an AP that advertises a switch to that (invalid) channel. This leads to not disconnecting, which we should. For Intel devices, this can lead to a firmware crash. Fix this by using an int type for the channel number as well as the opclass, and using a (negative) value that cannot be encoded in the element to indicate it's not present. | ||||
| CVE-2026-90348 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: snoc: use memcpy_fromio() for MSA ramdump On WCN3990/SNOC the MSA region is mapped with devm_memremap(MEMREMAP_WT). On arm64 such a mapping is not Normal-cacheable, so unaligned accesses to it are not permitted. ath10k_msa_dump_memory() copies the region with a plain memcpy(), whose optimized __pi_memcpy_generic implementation issues wide/unaligned loads. This triggers an alignment fault (FSC=0x21) Oops in ath10k_snoc_fw_crashed_dump() while collecting the devcoredump: Unable to handle kernel paging request ... FSC=0x21: alignment fault pc : __pi_memcpy_generic lr : ath10k_snoc_fw_crashed_dump [ath10k_snoc] The Oops both leaves the firmware RAM dump buffer zeroed (no dump is captured) and crashes the kernel, which in turn breaks modem SSR recovery. Use memcpy_fromio(), which only performs accesses that are valid for such a device-memory mapping. The generic memcpy_fromio() implementation aligns the source before issuing word-sized reads and stores the destination with put_unaligned(), so it is also safe for the coherent DMA allocation used on the non-reserved-memory path. ath11k and ath12k use the same pattern when copying target memory into crash dumps, so call it unconditionally here too. The MEMREMAP_WT pointer is a plain void *, so an explicit __iomem cast is needed; use __force to keep sparse happy. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00107-QCAHLSWMTPL-1 | ||||
| CVE-2026-90251 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MSFT: validate evt_prefix_len against the response length read_supported_features() only checks that the response covers the fixed part of struct msft_rp_read_supported_features, which is 11 bytes: if (skb->len < sizeof(*rp)) { bt_dev_err(hdev, "MSFT supported features length mismatch"); goto failed; } evt_prefix[] is a flexible array member and rp->evt_prefix_len is an unvalidated u8 taken straight out of that response, so msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len, GFP_KERNEL); copies up to 255 bytes from a reply that may have carried none of them. What is copied is data the controller never sent, and it is then used to match incoming vendor events in msft_vendor_evt(). This is not an out-of-bounds access. An skb data allocation always has at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the payload, which is more than the 255 byte maximum, so the read stays inside the allocation and KASAN does not report it. It is still a read of bytes the host was never given, with the length fully controlled by the controller. Reject a response that is too short for the prefix it declares. Verified with an emulated controller over /dev/vhci on a KASAN kernel, with vhci made to advertise an MSFT opcode the way btintel, btqca, btmtk and btrtl do unconditionally. A reply of exactly 11 bytes declaring evt_prefix_len = 255 reaches kmemdup and copies 255 bytes ("skb->len=11 evt_prefix_len=255", with the copied buffer dumped); since the reply ends at the fixed part, all 255 come from past the end of the response. No KASAN report is produced, as expected from the allocation slack described above. With this patch the response is rejected with "MSFT event prefix length mismatch" and msft->evt_prefix is left unset. | ||||
| CVE-2026-90258 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: airoha: add missed IRQ resource helpers Without hooking .irq_request_resources, gpiolib cannot set GPIOD_FLAG_USED_AS_IRQ. This breaks pin direction locking and can allow userspace or another driver to reconfigure an active IRQ pin as an output | ||||
| CVE-2026-92933 | 1 Patriksimek | 1 Vm2 | 2026-09-19 | 5.8 Medium |
| vm2 is a sandbox for running untrusted Node.js code. In versions <= 3.11.7, NodeVM exposes the host `util` module to the sandbox as an unfiltered shallow copy (`Object.assign({}, util)` in `defaultBuiltinLoaderUtil`), and the deprecated `sys` builtin (an alias of host `util`) is exposed through the generic builtin loader. On Node.js >= 22.9 this hands sandboxed code `util.getCallSites()`, a programmatic stack-introspection API that returns the host process's full call stack, including absolute file paths, function names, and line numbers for vm2 bridge internals and the embedding application's entrypoint. This bypasses the host-frame redaction introduced for GHSA-v27g-jcqj-v8rw, which only applies to the `Error.prepareStackTrace` formatting channel. The issue is fixed in vm2 3.11.8. | ||||
| CVE-2026-92917 | 1 Getgrav | 1 Grav | 2026-09-19 | 7.5 High |
| Grav is a flat-file CMS. In versions 2.0.0-rc.1 through 2.0.21, the Twig content sandbox fails to restrict the dump and serialize filters (print_r, vardump, json_encode, yaml_encode, string): GravExtension::assertSandboxDumpSafe() determines sandbox state by calling SandboxExtension::isSandboxed() without a Source argument, which reports only the global sandbox flag that Grav never enables, so the guard added in GHSA-mc5q-6hpj-rp7j never executes. As a result, an authenticated user with page-edit rights can render {{ config|print_r }} in page content with Twig processing enabled and dump Grav's entire merged configuration — print_r reflects the real Config object held in a private property of the SandboxConfig facade, bypassing its path redaction — exposing plugin secrets such as SMTP credentials, API tokens, webhook secrets and cache backend passwords. Grav 1.7 is not affected because it ships no Twig content sandbox. The issue is fixed in 2.0.22, where the affected filters are registered with Twig's needs_is_sandboxed flag. | ||||
| CVE-2026-92860 | 1 Rcourtman | 1 Pulse | 2026-09-19 | 9.1 Critical |
| A security flaw has been discovered in rcourtman Pulse up to 6.0.4/6.1.0-rc.4. Affected by this issue is the function fmt.Sprintf of the file /api/security/quick-setup of the component Quick Security Setup Handler. The manipulation of the argument Username results in improper input validation. The attack may be performed from remote. Upgrading the affected component is advised. | ||||
| CVE-2026-90212 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64/efi: Avoid voluntary preemption with efi_mm installed Gus reports a bad kernel memory access when using software PAN (CONFIG_ARM64_SW_TTBR0_PAN=y) on a machine with support for EFI runtime services: Unable to handle kernel access to user memory outside uaccess routines at virtual address 00000000f322ff30 Mem abort info: ESR = 0x0000000096000004 FSC = 0x04: level 0 translation fault Internal error: Oops: 0000000096000004 [#1] SMP Workqueue: efi_rts_wq efi_call_rts pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : efi_call_rts+0xd8/0x288 Call trace: efi_call_rts+0xd8/0x288 (P) process_one_work+0x178/0x4f8 worker_thread+0x194/0x328 This is because the fpsimd context management code called from __efi_fpsimd_begin() can preempt voluntarily, returning later to the EFI code with an incorrect value for TTBR0_EL1 thanks to the deferred mm switching used by the software PAN implementation. Since EFI runtime services cannot preempt voluntarily and because the fpsimd switching code does not rely on the TTBR0_EL1 mappings, simply reorder the fpsimd switch so that it occurs before we change the page-table. | ||||
| CVE-2026-64684 | 1 Modelcontextprotocol | 1 Rust-sdk | 2026-09-19 | 6.8 Medium |
| RMCP is an official Rust SDK for the Model Context Protocol. Prior to 2.1.0, the rmcp crate's StreamableHttpClientTransport in crates/rmcp/src/transport/common/reqwest/streamable_http_client.rs builds its default_http_client with reqwest's automatic redirect policy and applies caller-supplied values from StreamableHttpClientTransportConfig.custom_headers without marking them as sensitive. When a malicious or compromised MCP endpoint returns a cross-origin 307 or 308 redirect, reqwest follows the redirect and apply_custom_headers causes custom API keys or authentication tokens to be replayed to the new origin, where an attacker can capture and reuse them. The separate auth_header path is not affected because it uses the standard Authorization header, which reqwest strips on cross-origin redirects. This issue is fixed in version 2.1.0. | ||||
| CVE-2026-61588 | 1 Djust-org | 1 Djust | 2026-09-19 | 6.5 Medium |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, when a Django `Model` instance is assigned to a public view attribute, djust serialized it to the client with no sensitive-field denylist — sending fields such as `password` (the hash), privilege flags (e.g. `is_staff` / `is_superuser`), tokens, and other PII to the browser. Because exposing model objects to templates is a normal djust pattern, this could leak credentials/PII without the developer realizing the full object crossed the wire. This is fixed in djust 1.0.7. Model serialization applies a secure-by-default sensitive-field denylist (password/hash/token/secret-style fields and known privilege flags are withheld) with an identity-subset fallback. As a workaround, keep `Model` instances on `_private` attributes and expose only the specific fields needed, until patched. | ||||
| CVE-2026-45723 | 1 Siderolabs | 1 Omni | 2026-09-18 | 2.7 Low |
| Omni manages Kubernetes on bare metal, virtual machines, or in a cloud. Prior to 1.6.6 and 1.7.3, managementServer.CreateSchematic in internal/backend/grpc/schematics.go passes the caller-controlled TalosVersion field to imageFactoryClient.OverlaysVersions without validating it as a version. An authenticated Operator can submit traversal segments in TalosVersion, and url.URL.JoinPath normalizes them into unintended paths on the configured image-factory host. Omni then issues HTTP GET requests to those paths and reflects error-body content, enabling same-host endpoint probing and possible disclosure of internal diagnostics while preventing redirection to another host or write requests. This issue is fixed in versions 1.6.6 and 1.7.3. | ||||
| CVE-2026-54617 | 1 Gravitlauncher | 1 Launcher | 2026-09-18 | 9.8 Critical |
| GravitLauncher is an open-source Minecraft launcher based on sashok724's v3. Prior to 5.7.12, an unauthenticated remote actor can send a raw HTTP request target without a leading slash to the default LaunchServer file server on port 9274. FileServerHandler.channelRead0 in components/launchserver/src/main/java/pro/gravit/launchserver/socket/handlers/fileserver/FileServerHandler.java strips the first request-target character and resolves the remaining path against updatesDir without re-normalizing and verifying containment. This leaves parent-directory components in a no-leading-slash request and allows reading any file accessible to the LaunchServer process, including .keys/ecdsa_id, .keys/legacySalt, and LaunchServer.json. Disclosure of those files can expose signing keys, refresh-token material, and database credentials, enabling forged administrative access tokens and full authentication bypass. A normalizing L7 proxy may block the primary request form, but direct exposure and L4/TCP proxies remain affected, and netty.fileServerEnabled is enabled by default. This issue is fixed in 5.7.12. | ||||
| CVE-2026-83191 | 1 Oracle | 1 Siebel Crm Deployment | 2026-09-18 | 8.1 High |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.7. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TCP to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in takeover of Siebel CRM Deployment. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-92916 | 1 Getgrav | 1 Grav | 2026-09-18 | 7.5 High |
| Grav is a flat-file CMS. In Grav 1.7.0 through 1.7.53.2 and 2.0.0 through 2.0.21, when the debugger is enabled (system.debugger.enabled: true, which is not the default), the Clockwork profiler endpoint is exposed without authentication: InitializeProcessor::handleDebuggerRequest() intercepts any path containing /__clockwork/ during bootstrap and passes it to Debugger::debuggerRequest(), which performs no user lookup, IP restriction, or Clockwork authenticator check, and also supports anonymous pagination over the entire stored history. With the shipped censored: false default, each stored record contains raw request cookies (including Grav's session cookie, whose value is the PHP session id, allowing an attacker to resume another user's session, including an authenticated admin's), the full parsed request body (Grav's login form posts data[username]/data[password], so passwords are stored in plaintext because Clockwork's password filter only inspects top-level keys), and the site's entire system and plugin configuration, including operator-saved secrets such as SMTP credentials, third-party API keys, and licence keys. Authorization and X-API-Token headers are stored even when censored: true. On Grav 2.0, setting provider: debugbar does not avoid the issue because Grav forces the Clockwork provider for requests preferring a JSON response. The issue is fixed in 1.7.53.4 and 2.0.22, which restrict /__clockwork/ to server-local requests or requests presenting the new system.debugger.token secret and strip cookies and credential headers from stored records. Workarounds include setting debugger.enabled: false or blocking /__clockwork/ at the web server or CDN. | ||||
| CVE-2026-92594 | 1 Craftcms | 1 Craft Cms | 2026-09-18 | 7.5 High |
| Craft CMS 5.0.0-RC1 through versions before 5.11.0 incorrectly authorize the GraphQL draftCreator and revisionCreator fields: instead of requiring the user-data scope enforced by Gql::canQueryUsers() (usergroups.*:read), these fields are gated only on the elements.drafts:read / elements.revisions:read scopes, and their resolver returns a raw User element whose email, username, fullName, and addresses fields have no per-field authorization. A client holding only the drafts or revisions scope — including an unauthenticated client when the operator has enabled the public GraphQL schema with those scopes — can therefore harvest the email addresses, usernames, full names, and postal addresses of all draft/revision creators (typically site editors and administrators). The issue is fixed in 5.11.0. | ||||
| CVE-2026-90999 | 1 Functional Software | 1 Sentry Seer | 2026-09-18 | 9.8 Critical |
| Sentry Seer is vulnerable to a multi-stage trust-boundary violation that allows unauthenticated attacker-controlled telemetry to become code that is executed by an agent in a privileged automation environment. An external attacker can submit fabricated Sentry events without having access to the victim’s Sentry account, source repository, or infrastructure. | ||||
| CVE-2026-44940 | 1 Suse | 1 Suse Observability | 2026-09-18 | 5.7 Medium |
| The rancher-extension-stackstate extension in SUSE Observability exposes service tokens in plain configuration or insecure locations rather than managing them securely. An attacker with minimal access could obtain the token to gain unauthorized access or escalate privileges within the observability environment. | ||||