Export limit exceeded: 358895 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 358895 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (358895 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-33610 | 1 Powerdns | 1 Authoritative | 2026-04-24 | 5.9 Medium |
| A rogue primary server may cause file descriptor exhaustion and eventually a denial of service, when a PowerDNS secondary server forwards a DNS update request to it. | ||||
| CVE-2026-33609 | 1 Powerdns | 1 Authoritative | 2026-04-24 | 5.3 Medium |
| Incomplete escaping of LDAP queries when running with 8bit-dns enabled allows users to perform queries of internal domain subtrees. | ||||
| CVE-2026-33608 | 1 Powerdns | 1 Authoritative | 2026-04-24 | 7.4 High |
| An attacker can send a notify request that causes a new secondary domain to be added to the bind backend, but causes said backend to update its configuration to an invalid one, leading to the backend no longer able to run on the next restart, requiring manual operation to fix it. | ||||
| CVE-2026-33602 | 1 Powerdns | 1 Dnsdist | 2026-04-24 | 6.5 Medium |
| A rogue backend can send a crafted UDP response with a query ID off by one related to the maximum configured value, triggering an out-of-bounds write leading to a denial of service. | ||||
| CVE-2026-33599 | 1 Powerdns | 1 Dnsdist | 2026-04-24 | 3.1 Low |
| A rogue backend can send a crafted SVCB response to a Discovery of Designated Resolvers request, when requested via either the autoUpgrade (Lua) option to newServer or auto_upgrade (YAML) settings. DDR upgrade is not enabled by default. | ||||
| CVE-2026-33598 | 1 Powerdns | 1 Dnsdist | 2026-04-24 | 4.8 Medium |
| A cached crafted response can cause an out-of-bounds read if custom Lua code calls getDomainListByAddress() or getAddressListByDomain() on a packet cache. | ||||
| CVE-2026-33597 | 1 Powerdns | 1 Dnsdist | 2026-04-24 | 3.7 Low |
| PRSD detection denial of service | ||||
| CVE-2026-33596 | 1 Powerdns | 1 Dnsdist | 2026-04-24 | 3.1 Low |
| A client might theoretically be able to cause a mismatch between queries sent to a backend and the received responses by sending a flood of perfectly timed queries that are routed to a TCP-only or DNS over TLS backend. | ||||
| CVE-2026-33595 | 1 Powerdns | 1 Dnsdist | 2026-04-24 | 5.3 Medium |
| A client can trigger excessive memory allocation by generating a lot of errors responses over a single DoQ and DoH3 connection, as some resources were not properly released until the end of the connection. | ||||
| CVE-2026-33593 | 1 Powerdns | 1 Dnsdist | 2026-04-24 | 7.5 High |
| A client can trigger a divide by zero error leading to crash by sending a crafted DNSCrypt query. | ||||
| CVE-2026-23363 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7925_mac_write_txwi_80211 in order to avoid a possible oob access. | ||||
| CVE-2026-23365 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: validate USB endpoints The kalmia driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints. | ||||
| CVE-2026-23388 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases. | ||||
| CVE-2026-23387 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe() devm_add_action_or_reset() already invokes the action on failure, so the explicit put causes a double-put. | ||||
| CVE-2026-23386 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA buffer cleanup path. It iterates num_bufs times and attempts to unmap entries in the dma array. This leads to two issues: 1. The dma array shares storage with tx_qpl_buf_ids (union). Interpreting buffer IDs as DMA addresses results in attempting to unmap incorrect memory locations. 2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed the size of the dma array, causing out-of-bounds access warnings (trace below is how we noticed this issue). UBSAN: array-index-out-of-bounds in drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]') Workqueue: gve gve_service_task [gve] Call Trace: <TASK> dump_stack_lvl+0x33/0xa0 __ubsan_handle_out_of_bounds+0xdc/0x110 gve_tx_stop_ring_dqo+0x182/0x200 [gve] gve_close+0x1be/0x450 [gve] gve_reset+0x99/0x120 [gve] gve_service_task+0x61/0x100 [gve] process_scheduled_works+0x1e9/0x380 Fix this by properly checking for QPL mode and delegating to gve_free_tx_qpl_bufs() to reclaim the buffers. | ||||
| CVE-2026-23384 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: Fix kernel stack leak in ionic_create_cq() struct ionic_cq_resp resp { __u32 cqid[2]; // offset 0 - PARTIALLY SET (see below) __u8 udma_mask; // offset 8 - SET (resp.udma_mask = vcq->udma_mask) __u8 rsvd[7]; // offset 9 - NEVER SET <- LEAK }; rsvd[7]: 7 bytes of stack memory leaked unconditionally. cqid[2]: The loop at line 1256 iterates over udma_idx but skips indices where !(vcq->udma_mask & BIT(udma_idx)). The array has 2 entries but udma_count could be 1, meaning cqid[1] might never be written via ionic_create_cq_common(). If udma_mask only has bit 0 set, cqid[1] (4 bytes) is also leaked. So potentially 11 bytes leaked. | ||||
| CVE-2026-23383 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing struct bpf_plt contains a u64 target field. Currently, the BPF JIT allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT buffer. Because the base address of the JIT buffer can be 4-byte aligned (e.g., ending in 0x4 or 0xc), the relative padding logic in build_plt() fails to ensure that target lands on an 8-byte boundary. This leads to two issues: 1. UBSAN reports misaligned-access warnings when dereferencing the structure. 2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address. Fix this by increasing the allocation alignment requirement to 8 bytes (sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of the JIT buffer to an 8-byte boundary, allowing the relative padding math in build_plt() to correctly align the target field. | ||||
| CVE-2026-23382 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them In commit 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at raw event handle"), we handle the fact that raw event callbacks can happen even for a HID device that has not been "claimed" causing a crash if a broken device were attempted to be connected to the system. Fix up the remaining in-tree HID drivers that forgot to add this same check to resolve the same issue. | ||||
| CVE-2026-23381 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: <IRQ> ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled. | ||||
| CVE-2026-23368 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: register phy led_triggers during probe to avoid AB-BA deadlock There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and LED_TRIGGER_PHY are enabled: [ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock); [ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234 [ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c [ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c [ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0 [ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0 [ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c [ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78 [ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock(); [ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0 [ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c [ 1362.104022] [<80014504>] syscall_common+0x34/0x58 Here LED_TRIGGER_PHY is registering LED triggers during phy_attach while holding RTNL and then taking triggers_list_lock. [ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock(); [ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4 [ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock); [ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c [ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc [ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c [ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4 [ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c [ 1362.232164] [<80014504>] syscall_common+0x34/0x58 Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes triggers_list_lock and then RTNL. A classical AB-BA deadlock. phy_led_triggers_registers() does not require the RTNL, it does not make any calls into the network stack which require protection. There is also no requirement the PHY has been attached to a MAC, the triggers only make use of phydev state. This allows the call to phy_led_triggers_registers() to be placed elsewhere. PHY probe() and release() don't hold RTNL, so solving the AB-BA deadlock. | ||||