Export limit exceeded: 12703 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (12703 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63977 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work The change_work was introduced to send device change notifications from DPLL device callbacks without deadlocking on dpll_lock, since the callbacks are already invoked under that lock. Now that __dpll_device_change_ntf() is exported for callers that already hold dpll_lock, use it directly and remove the change_work infrastructure entirely. This eliminates a race condition where change_work could be re-scheduled after cancel_work_sync() during device teardown, potentially causing the handler to dereference a freed or NULL dpll_dev pointer. | ||||
| CVE-2026-63951 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_writeback_endio A crash was observed in zram_writeback_endio due to a NULL pointer dereference in wake_up. The root cause is a race condition between the bio completion handler (zram_writeback_endio) and the writeback task. In zram_writeback_endio, wake_up() is called on &wb_ctl->done_wait after releasing wb_ctl->done_lock. This creates a race window where the writeback task can see num_inflight become 0, return, and free wb_ctl before zram_writeback_endio calls wake_up(). CPU 0 (zram_writeback_endio) CPU 1 (writeback_store) ============================ ============================ zram_writeback_slots zram_submit_wb_request zram_submit_wb_request wait_event(wb_ctl->done_wait) spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); wake_up(&wb_ctl->done_wait); zram_complete_done_reqs spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); while (num_inflight) > 0) spin_lock(&wb_ctl->done_lock); list_del(&req->entry); spin_unlock(&wb_ctl->done_lock); // num_inflight becomes 0 atomic_dec(num_inflight); // Leave zram_writeback_slots // Free wb_ctl release_wb_ctl(wb_ctl); // UAF crash! wake_up(&wb_ctl->done_wait); This patch fixes this race by using RCU. By protecting wb_ctl with rcu_read_lock() in zram_writeback_endio and using kfree_rcu() to free it, we ensure that wb_ctl remains valid during the execution of zram_writeback_endio. | ||||
| CVE-2026-63872 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: esp: fix page frag reference leak on skb_to_sgvec failure In esp_output_tail(), when esp->inplace is false, the old skb page frags are replaced with a new page from the xfrm page_frag cache. The source scatterlist (sg) is built from the old frags before the replacement, and esp_ssg_unref() is responsible for releasing the old page references after the crypto operation completes. However, if the second skb_to_sgvec() call (which builds the destination scatterlist from the new page) fails, the code jumps to error_free which only calls kfree(tmp). The old page frag references captured in the source scatterlist are never released: 1. sg[] is built from old frags via skb_to_sgvec() (no extra get_page) 2. nr_frags is set to 1 and frag[0] is replaced with the new page 3. Second skb_to_sgvec() fails -> goto error_free 4. kfree(tmp) frees the sg[] memory but old frags are not unref'd 5. kfree_skb() only releases frag[0] (the new page), not the old ones Fix this by adding a bool parameter to esp_ssg_unref() that, when true, unconditionally unrefs the source scatterlist frags without checking req->src and req->dst, since those fields are not yet initialized by aead_request_set_crypt() at the point of the error. Existing callers pass false to preserve the original behavior. The same issue exists in both esp4 and esp6 as the code is identical. | ||||
| CVE-2026-63860 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Prefer NLA_NUL_STRING These attributes are evaluated as c-string (passed to strcmp), but NLA_STRING doesn't check for the presence of a \0 terminator. Either this needs to switch to nla_strcmp() and needs to adjust printf fmt specifier to not use plain %s, or this needs to use NLA_NUL_STRING. As the code has been this way for long time, it seems to me that userspace does include the terminating nul, even tough its not enforced so far, and thus NLA_NUL_STRING use is the simpler solution. | ||||
| CVE-2026-8149 | 1 Bouncycastle | 1 Bc-fja | 2026-07-21 | N/A |
| A vulnerability in Legion of the Bouncy Castle Inc. BC-LTS bcprov-lts8on on X86_64, AVX, AVX-512f, Linux, Legion of the Bouncy Castle Inc. BC-FJA bc-fips on Linux, X86_64, AVX, AVX-512f. This vulnerability is associated with program files gcm128w, gcm512w, gcm128w.C, gcm512w.C. This issue affects BC-LTS: from 2.73.0 before 2.73.11; BC-FJA: from 2.1.0 before 2.1.3. | ||||
| CVE-2026-63883 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ When uart_flush_buffer() runs before the DMA completion IRQ is delivered, the following race can occur (all steps serialized by uart_port_lock): 1. DMA starts: tx_remaining = N, kfifo contains N bytes 2. DMA completes in hardware; IRQ is pending but not yet delivered 3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(), making kfifo_len() = 0 while tx_remaining remains N 4. uart_flush_buffer() releases the port lock 5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls uart_xmit_advance(uport, tx_remaining) on an empty kfifo uart_xmit_advance() increments kfifo->out by tx_remaining. Since kfifo_reset() already set both in and out to 0, out wraps past in, causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next start_tx_dma() call then submits a DMA transfer of stale buffer data. Fix this by snapshotting kfifo_len() at the start of handle_tx_dma() and skipping uart_xmit_advance() when fifo_len < tx_remaining, which indicates the kfifo was reset by a preceding flush. | ||||
| CVE-2026-63917 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_changelink(). ip netns add ns1 ip netns add ns2 ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7 ip -n ns1 link set vti6_test netns ns2 ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9 ip netns del ns2 ip netns del ns1 [ 132.495484] ------------[ cut here ]------------ [ 132.497609] kernel BUG at net/core/dev.c:12376! Commit 61220ab34948 ("vti6: Enable namespace changing") dropped NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then move through IFLA_NET_NS_FD. After the move dev_net(dev) points at the new netns while t->net stays at the creation netns. vti6_changelink() and vti6_update() still use dev_net(dev) and dev_net(t->dev). They unlink from one per netns hash and relink into another. The creation netns is left with a stale entry. cleanup_net() of that netns later walks freed memory. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. | ||||
| CVE-2026-63918 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname A reader in l2tp_session_get_by_ifname() can return a pointer to a session whose refcount has reached zero. The getter takes its reference with plain refcount_inc(), but every other session getter in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the corresponding _get_next variants) uses refcount_inc_not_zero() because the IDR/RCU lookup can race with refcount_dec_and_test() -> l2tp_session_free() -> kfree_rcu(). The ifname getter is the only outlier; the inconsistency was raised on-list after 979c017803c4 ("l2tp: use list_del_rcu in l2tp_session_unhash"). A reader inside rcu_read_lock_bh() that matches session->ifname can be preempted between the strcmp() and the refcount_inc(). If the last reference drops on another CPU in that window, the reader's refcount_inc() runs on a counter that has reached zero. refcount_t catches the addition-on-zero, prints "refcount_t: addition on 0; use-after-free", saturates the counter, and returns the saturated pointer to the caller. Session memory is held live by the in-flight RCU read section, but the kfree_rcu() callback queued from l2tp_session_free() will free it once the grace period closes; a caller that dereferences the returned session past that point hits a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU sleeping lock and the preemption window is real; on stock PREEMPT kernels local_bh_disable() is a preempt_count increment that closes the cross-CPU race in practice (see below). Use refcount_inc_not_zero() and continue the list walk on failure, matching the other session getters in the file. The ifname getter is the only session getter in net/l2tp/ that still uses the bare refcount_inc() pattern; this change restores file-internal consistency. The success path is unchanged. | ||||
| CVE-2026-63913 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check An unintended behavior in the TCP conntrack state machine allows a connection to be forced into the CLOSE state using an RST packet with an invalid sequence number. Specifically, after a SYN packet is observed, an RST with an invalid SEQ can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of whether the RST corresponds to the expected reply direction. The relevant code path assumes the RST is a response to an outgoing SYN, but does not validate packet direction or ensure that a matching SYN was actually sent in the opposite direction. As a result, a crafted packet sequence consisting of a SYN followed by an invalid-sequence RST can prematurely terminate an active NAT entry. This makes connection teardown easier than intended. So, tighten the state transition logic to ensure that RST-triggered CLOSE transitions only occur when the RST is a valid response to a previously observed SYN in the correct direction. | ||||
| CVE-2026-63894 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: serialize DMABUF cancel against request completion ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the completed request but leaves priv->req, the back-pointer that ffs_dmabuf_transfer() set on submission, pointing at the freed memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or ffs_epfile_release() on the close path still sees priv->req non-NULL under ffs->eps_lock: if (priv->ep && priv->req) usb_ep_dequeue(priv->ep, priv->req); so usb_ep_dequeue() is called on a freed usb_request. On dummy_hcd the dequeue path only walks a live queue and pointer-compares, so the freed pointer reads without faulting and KASAN requires an explicit check at the FunctionFS call site to surface the use-after-free. On SG-capable in-tree UDCs the dequeue path dereferences the supplied request immediately: * chipidea's ep_dequeue() does container_of(req, struct ci_hw_req, req) and reads hwreq->req.status before acquiring its own lock. * cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first. The narrower option of clearing priv->req via cmpxchg() in the completion does not close the race: the completion runs without eps_lock, so a cancel path holding eps_lock can still observe priv->req non-NULL, race a concurrent completion that clears and frees, and pass the freed pointer to usb_ep_dequeue(). A slightly longer fix that moves the free into the cleanup work is needed. Same class of lifetime race as the recent usbip-vudc timer fix [1]. Take eps_lock in the sole place that mutates priv->req from the callback direction by moving usb_ep_free_request() out of the completion into ffs_dmabuf_cleanup(), the existing work handler scheduled by ffs_dmabuf_signal_done() on ffs->io_completion_wq. Clear priv->req there under eps_lock before freeing, and only clear if priv->req still names our request (a subsequent ffs_dmabuf_transfer() on the same attachment may have queued a new one). This keeps the existing dummy_hcd sync-dequeue invariant: the completion callback is still invoked by the UDC without eps_lock held (dummy_hcd drops its own lock before calling the callback), and the callback now takes no f_fs lock at all. Serialization against the cancel path happens in cleanup, which runs from the workqueue with no f_fs lock held on entry. The priv ref count protects the containing ffs_dmabuf_priv: ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup drops it via ffs_dmabuf_put(), so priv stays live for the cleanup even after the cancel path's list_del + ffs_dmabuf_put. The ffs_dmabuf_transfer() error path no longer frees usb_req inline: fence->req and fence->ep are set before usb_ep_queue(), so ffs_dmabuf_cleanup() (scheduled by the error-path ffs_dmabuf_signal_done()) owns the free regardless of whether the queue succeeded. Reproduced under KASAN on both detach and close paths against dummy_hcd with an observability hook (kasan_check_byte(priv->req) immediately before usb_ep_dequeue) at the two FunctionFS cancel sites to surface the stale-pointer access; the hook is not part of this patch. The KASAN allocator / free stacks in the captured splats identify the same request: alloc in dummy_alloc_request, free in dummy_timer, fault reached from ffs_epfile_release (close) and from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the patch applied, both paths are silent under the same hook. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace or from a USB host on the cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the filesystem supports uid=, gid=, and fmode= delegation to a non-root gadget daemon, so on real deployments the attacker may be a less-privileged service rather than root. | ||||
| CVE-2026-63881 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger get_queue_ids() computes array_size = num_queues * sizeof(uint32_t), which could overflow on 32-bit size_t build. using array_size() instead, it saturates to SIZE_MAX on overflow. (cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285) | ||||
| CVE-2026-55874 | 1 Seaweedfs | 1 Seaweedfs | 2026-07-21 | 7.7 High |
| SeaweedFS is a distributed storage system. Prior to 4.34, the S3 API gateway does not reject dot-dot path segments in the X-Amz-Copy-Source header used by CopyObject and UploadPartCopy, allowing an authenticated identity scoped to one bucket to read objects from other buckets through server-side copy. This issue is fixed in version 4.34. | ||||
| CVE-2026-59877 | 1 Protobuf | 1 Protobuf | 2026-07-21 | 5.3 Medium |
| protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 7.6.5 and 8.6.6, protobufjs parsed option names by advancing through schema tokens until reaching an = token without checking for end of input, so a crafted .proto schema that opens an option declaration and ends prematurely can cause parse, Root.load, or Root.loadSync to loop indefinitely. This issue is fixed in versions 7.6.5 and 8.6.6. | ||||
| CVE-2026-12970 | 2 Learnpress, Wordpress | 2 Learnpress, Wordpress | 2026-07-21 | 7.1 High |
| The LearnPress WordPress plugin before 4.4.1 does not escape a search parameter before reflecting it into an HTML attribute, leading to Reflected Cross-Site Scripting that executes in the browser of a logged-in instructor or administrator who is tricked into opening a crafted link. | ||||
| CVE-2026-49208 | 1 Symfony | 1 Ux | 2026-07-21 | N/A |
| Symfony UX is a JavaScript ecosystem for Symfony. From 2.8.0 until 2.36.0 and 3.1.0, when a #[LiveProp] is typed as DateTimeInterface and no explicit format is configured, Symfony\UX\LiveComponent\LiveComponentHydrator::hydrateObjectValue() falls back to new $className($value), allowing client-supplied relative strings such as now, tomorrow, or +10 years to move a writable, format-less date prop past time-based business logic checks. This issue is fixed in versions 2.36.0 and 3.1.0. | ||||
| CVE-2026-16014 | 1 Code-projects | 1 Hospital Bed Management System | 2026-07-21 | 7.3 High |
| A vulnerability was found in code-projects Hospital Bed Management System 1.0. This affects an unknown part of the component Login Form. Performing a manipulation of the argument Username results in sql injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. | ||||
| CVE-2026-2445 | 1 Wso2 | 6 Api Control Plane, Api Manager, Identity Server and 3 more | 2026-07-21 | 6.1 Medium |
| The affected product accepts user-supplied input within a URL parameter without enforcing expected sanitization or encoding before rendering it within the response. This condition allows for the injection of malicious JavaScript payloads. An attacker can leverage this vulnerability to cause the user's browser to redirect to a malicious website, modify the user interface of the webpage, or retrieve sensitive information from the browser. However, the impact is mitigated for session hijacking as all session-related sensitive cookies are protected by the httpOnly flag. | ||||
| CVE-2026-54910 | 1 Gtsteffaniak | 1 Filebrowser | 2026-07-21 | 7.7 High |
| FileBrowser Quantum is a free, self-hosted, web-based file manager. Prior to version 1.4.3-beta, the `subtitlesHandler` endpoint (`GET /api/media/subtitles`) accepts two user-controlled query parameters: `path` and `name`, both of which are used in filesystem operations without sanitization, creating two independent path traversal vectors. The primary vector is the `path` parameter: it is passed directly to `idx.GetRealPath()` without calling `SanitizeUserPath()`, allowing an attacker to escape the storage root and set `parentDir` to any directory on the host. No existing anchor file is required. The secondary vector is the `name` parameter: it is joined with `parentDir` via `filepath.Join(parentDir, name)` without stripping directory components, allowing traversal relative to any resolved `parentDir`. Any authenticated user (regardless of role or permissions) can exploit either vector to read any text file readable by the server process, including `/etc/passwd`, SSH keys, database credentials, and JWT signing keys. Version 1.4.3-beta patches the issue. | ||||
| CVE-2026-58484 | 1 Jovancoding | 1 Network-ai | 2026-07-21 | 7.1 High |
| Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `EnvironmentManager.listBackups()` reads each backup's `_manifest.json` and trusts the manifest's `path` field. `EnvironmentManager.pruneBackups()` later passes that trusted `entry.path` directly to `rmSync(entry.path, { recursive: true, force: true })`. An attacker who can place or modify a manifest inside `data/<env>/.backups/<name>/_manifest.json` can cause `network-ai env backup prune --env <env> --keep <n>` or any code path invoking `pruneBackups()` to recursively delete an arbitrary path accessible to the Network-AI process user. This is fixed in v5.12.2. `pruneBackups()` no longer passes `entry.path` from the on-disk manifest to `rmSync`. The deletion path is recomputed from a format-validated `entry.backupId`, and a `dirname` containment check confines deletion to exactly one level under the backups directory. A poisoned manifest (e.g. `"path": "/"`) is now inert. | ||||
| CVE-2026-45713 | 1 Axllent | 1 Mailpit | 2026-07-20 | 7.5 High |
| Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. Version 1.30.0 contains a patch. | ||||