Export limit exceeded: 36340 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36340 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23245 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gate: snapshot parameters with RCU on replace The gate action can be replaced while the hrtimer callback or dump path is walking the schedule list. Convert the parameters to an RCU-protected snapshot and swap updates under tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits the entry list, preserve the existing schedule so the effective state is unchanged. | ||||
| CVE-2026-23141 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: send: check for inline extents in range_is_hole_in_parent() Before accessing the disk_bytenr field of a file extent item we need to check if we are dealing with an inline extent. This is because for inline extents their data starts at the offset of the disk_bytenr field. So accessing the disk_bytenr means we are accessing inline data or in case the inline data is less than 8 bytes we can actually cause an invalid memory access if this inline extent item is the first item in the leaf or access metadata from other items. | ||||
| CVE-2026-23113 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop Currently this is checked before running the pending work. Normally this is quite fine, as work items either end up blocking (which will create a new worker for other items), or they complete fairly quickly. But syzbot reports an issue where io-wq takes seemingly forever to exit, and with a bit of debugging, this turns out to be because it queues a bunch of big (2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't support ->read_iter(), loop_rw_iter() ends up handling them. Each read returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of these pending, processing the whole chain can take a long time. Easily longer than the syzbot uninterruptible sleep timeout of 140 seconds. This then triggers a complaint off the io-wq exit path: INFO: task syz.4.135:6326 blocked for more than 143 seconds. Not tainted syzkaller #0 Blocked by coredump. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000 Call Trace: <TASK> context_switch kernel/sched/core.c:5256 [inline] __schedule+0x1139/0x6150 kernel/sched/core.c:6863 __schedule_loop kernel/sched/core.c:6945 [inline] schedule+0xe7/0x3a0 kernel/sched/core.c:6960 schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75 do_wait_for_common kernel/sched/completion.c:100 [inline] __wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121 io_wq_exit_workers io_uring/io-wq.c:1328 [inline] io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356 io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203 io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651 io_uring_files_cancel include/linux/io_uring.h:19 [inline] do_exit+0x2ce/0x2bd0 kernel/exit.c:911 do_group_exit+0xd3/0x2a0 kernel/exit.c:1112 get_signal+0x2671/0x26d0 kernel/signal.c:3034 arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:41 [inline] exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline] do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa02738f749 RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098 RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98 There's really nothing wrong here, outside of processing these reads will take a LONG time. However, we can speed up the exit by checking the IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will exit the ring after queueing up all of these reads. Then once the first item is processed, io-wq will simply cancel the rest. That should avoid syzbot running into this complaint again. | ||||
| CVE-2026-23100 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb_pmd_shared() Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using mmu_gather)", v3. One functional fix, one performance regression fix, and two related comment fixes. I cleaned up my prototype I recently shared [1] for the performance fix, deferring most of the cleanups I had in the prototype to a later point. While doing that I identified the other things. The goal of this patch set is to be backported to stable trees "fairly" easily. At least patch #1 and #4. Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing Patch #2 + #3 are simple comment fixes that patch #4 interacts with. Patch #4 is a fix for the reported performance regression due to excessive IPI broadcasts during fork()+exit(). The last patch is all about TLB flushes, IPIs and mmu_gather. Read: complicated There are plenty of cleanups in the future to be had + one reasonable optimization on x86. But that's all out of scope for this series. Runtime tested, with a focus on fixing the performance regression using the original reproducer [2] on x86. This patch (of 4): We switched from (wrongly) using the page count to an independent shared count. Now, shared page tables have a refcount of 1 (excluding speculative references) and instead use ptdesc->pt_share_count to identify sharing. We didn't convert hugetlb_pmd_shared(), so right now, we would never detect a shared PMD table as such, because sharing/unsharing no longer touches the refcount of a PMD table. Page migration, like mbind() or migrate_pages() would allow for migrating folios mapped into such shared PMD tables, even though the folios are not exclusive. In smaps we would account them as "private" although they are "shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the pagemap interface. Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared(). | ||||
| CVE-2026-23086 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: cap TX credit to local buffer size The virtio transports derives its TX credit directly from peer_buf_alloc, which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value. On the host side this means that the amount of data we are willing to queue for a connection is scaled by a guest-chosen buffer size, rather than the host's own vsock configuration. A malicious guest can advertise a large buffer and read slowly, causing the host to allocate a correspondingly large amount of sk_buff memory. The same thing would happen in the guest with a malicious host, since virtio transports share the same code base. Introduce a small helper, virtio_transport_tx_buf_size(), that returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume peer_buf_alloc. This ensures the effective TX window is bounded by both the peer's advertised buffer and our own buf_alloc (already clamped to buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer cannot force the other to queue more data than allowed by its own vsock settings. On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with 32 guest vsock connections advertising 2 GiB each and reading slowly drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only recovered after killing the QEMU process. That said, if QEMU memory is limited with cgroups, the maximum memory used will be limited. With this patch applied: Before: MemFree: ~61.6 GiB Slab: ~142 MiB SUnreclaim: ~117 MiB After 32 high-credit connections: MemFree: ~61.5 GiB Slab: ~178 MiB SUnreclaim: ~152 MiB Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest remains responsive. Compatibility with non-virtio transports: - VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per socket based on the local vsk->buffer_* values; the remote side cannot enlarge those queues beyond what the local endpoint configured. - Hyper-V's vsock transport uses fixed-size VMBus ring buffers and an MTU bound; there is no peer-controlled credit field comparable to peer_buf_alloc, and the remote endpoint cannot drive in-flight kernel memory above those ring sizes. - The loopback path reuses virtio_transport_common.c, so it naturally follows the same semantics as the virtio transport. This change is limited to virtio_transport_common.c and thus affects virtio-vsock, vhost-vsock, and loopback, bringing them in line with the "remote window intersected with local policy" behaviour that VMCI and Hyper-V already effectively have. [Stefano: small adjustments after changing the previous patch] [Stefano: tweak the commit message] | ||||
| CVE-2025-71191 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: at_hdmac: fix device leak on of_dma_xlate() Make sure to drop the reference taken when looking up the DMA platform device during of_dma_xlate() when releasing channel resources. Note that commit 3832b78b3ec2 ("dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()") fixed the leak in a couple of error paths but the reference is still leaking on successful allocation. | ||||
| CVE-2025-71123 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix string copying in parse_apply_sb_mount_options() strscpy_pad() can't be used to copy a non-NUL-term string into a NUL-term string of possibly bigger size. Commit 0efc5990bca5 ("string.h: Introduce memtostr() and memtostr_pad()") provides additional information in that regard. So if this happens, the following warning is observed: strnlen: detected buffer overflow: 65 byte read of buffer size 64 WARNING: CPU: 0 PID: 28655 at lib/string_helpers.c:1032 __fortify_report+0x96/0xc0 lib/string_helpers.c:1032 Modules linked in: CPU: 0 UID: 0 PID: 28655 Comm: syz-executor.3 Not tainted 6.12.54-syzkaller-00144-g5f0270f1ba00 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__fortify_report+0x96/0xc0 lib/string_helpers.c:1032 Call Trace: <TASK> __fortify_panic+0x1f/0x30 lib/string_helpers.c:1039 strnlen include/linux/fortify-string.h:235 [inline] sized_strscpy include/linux/fortify-string.h:309 [inline] parse_apply_sb_mount_options fs/ext4/super.c:2504 [inline] __ext4_fill_super fs/ext4/super.c:5261 [inline] ext4_fill_super+0x3c35/0xad00 fs/ext4/super.c:5706 get_tree_bdev_flags+0x387/0x620 fs/super.c:1636 vfs_get_tree+0x93/0x380 fs/super.c:1814 do_new_mount fs/namespace.c:3553 [inline] path_mount+0x6ae/0x1f70 fs/namespace.c:3880 do_mount fs/namespace.c:3893 [inline] __do_sys_mount fs/namespace.c:4103 [inline] __se_sys_mount fs/namespace.c:4080 [inline] __x64_sys_mount+0x280/0x300 fs/namespace.c:4080 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x64/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e Since userspace is expected to provide s_mount_opts field to be at most 63 characters long with the ending byte being NUL-term, use a 64-byte buffer which matches the size of s_mount_opts, so that strscpy_pad() does its job properly. Return with error if the user still managed to provide a non-NUL-term string here. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2025-71095 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix the crash issue for zero copy XDP_TX action There is a crash issue when running zero copy XDP_TX action, the crash log is shown below. [ 216.122464] Unable to handle kernel paging request at virtual address fffeffff80000000 [ 216.187524] Internal error: Oops: 0000000096000144 [#1] SMP [ 216.301694] Call trace: [ 216.304130] dcache_clean_poc+0x20/0x38 (P) [ 216.308308] __dma_sync_single_for_device+0x1bc/0x1e0 [ 216.313351] stmmac_xdp_xmit_xdpf+0x354/0x400 [ 216.317701] __stmmac_xdp_run_prog+0x164/0x368 [ 216.322139] stmmac_napi_poll_rxtx+0xba8/0xf00 [ 216.326576] __napi_poll+0x40/0x218 [ 216.408054] Kernel panic - not syncing: Oops: Fatal exception in interrupt For XDP_TX action, the xdp_buff is converted to xdp_frame by xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame depends on the memory type of the xdp_buff. For page pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check the memory type and always uses the page pool type, this leads to invalid mappings and causes the crash. Therefore, check the xdp_buff memory type in stmmac_xdp_xmit_back() to fix this issue. | ||||
| CVE-2025-71088 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fallback earlier on simult connection Syzkaller reports a simult-connect race leading to inconsistent fallback status: WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Modules linked in: CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6 RSP: 0018:ffffc900006cf338 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007 R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900 R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0 Call Trace: <TASK> tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197 tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922 tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672 tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918 ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500 dst_input include/net/dst.h:471 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979 __netif_receive_skb+0x1d/0x160 net/core/dev.c:6092 process_backlog+0x442/0x15e0 net/core/dev.c:6444 __napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494 napi_poll net/core/dev.c:7557 [inline] net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684 handle_softirqs+0x216/0x8e0 kernel/softirq.c:579 run_ksoftirqd kernel/softirq.c:968 [inline] run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960 smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160 kthread+0x3c2/0x780 kernel/kthread.c:463 ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> The TCP subflow can process the simult-connect syn-ack packet after transitioning to TCP_FIN1 state, bypassing the MPTCP fallback check, as the sk_state_change() callback is not invoked for * -> FIN_WAIT1 transitions. That will move the msk socket to an inconsistent status and the next incoming data will hit the reported splat. Close the race moving the simult-fallback check at the earliest possible stage - that is at syn-ack generation time. About the fixes tags: [2] was supposed to also fix this issue introduced by [3]. [1] is required as a dependence: it was not explicitly marked as a fix, but it is one and it has already been backported before [3]. In other words, this commit should be backported up to [3], including [2] and [1] if that's not already there. | ||||
| CVE-2025-68725 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Do not let BPF test infra emit invalid GSO types to stack Yinhao et al. reported that their fuzzer tool was able to trigger a skb_warn_bad_offload() from netif_skb_features() -> gso_features_check(). When a BPF program - triggered via BPF test infra - pushes the packet to the loopback device via bpf_clone_redirect() then mentioned offload warning can be seen. GSO-related features are then rightfully disabled. We get into this situation due to convert___skb_to_skb() setting gso_segs and gso_size but not gso_type. Technically, it makes sense that this warning triggers since the GSO properties are malformed due to the gso_type. Potentially, the gso_type could be marked non-trustworthy through setting it at least to SKB_GSO_DODGY without any other specific assumptions, but that also feels wrong given we should not go further into the GSO engine in the first place. The checks were added in 121d57af308d ("gso: validate gso_type in GSO handlers") because there were malicious (syzbot) senders that combine a protocol with a non-matching gso_type. If we would want to drop such packets, gso_features_check() currently only returns feature flags via netif_skb_features(), so one location for potentially dropping such skbs could be validate_xmit_unreadable_skb(), but then otoh it would be an additional check in the fast-path for a very corner case. Given bpf_clone_redirect() is the only place where BPF test infra could emit such packets, lets reject them right there. | ||||
| CVE-2025-40300 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/vmscape: Add conditional IBPB mitigation VMSCAPE is a vulnerability that exploits insufficient branch predictor isolation between a guest and a userspace hypervisor (like QEMU). Existing mitigations already protect kernel/KVM from a malicious guest. Userspace can additionally be protected by flushing the branch predictors after a VMexit. Since it is the userspace that consumes the poisoned branch predictors, conditionally issue an IBPB after a VMexit and before returning to userspace. Workloads that frequently switch between hypervisor and userspace will incur the most overhead from the new IBPB. This new IBPB is not integrated with the existing IBPB sites. For instance, a task can use the existing speculation control prctl() to get an IBPB at context switch time. With this implementation, the IBPB is doubled up: one at context switch and another before running userspace. The intent is to integrate and optimize these cases post-embargo. [ dhansen: elaborate on suboptimal IBPB solution ] | ||||
| CVE-2025-39955 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect(). syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk in the TCP_ESTABLISHED state. [0] syzbot reused the server-side TCP Fast Open socket as a new client before the TFO socket completes 3WHS: 1. accept() 2. connect(AF_UNSPEC) 3. connect() to another destination As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes it to TCP_CLOSE and makes connect() possible, which restarts timers. Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the retransmit timer triggered the warning and the intended packet was not retransmitted. Let's call reqsk_fastopen_remove() in tcp_disconnect(). [0]: WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Modules linked in: CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3e RSP: 0018:ffffc900002f8d40 EFLAGS: 00010293 RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017 RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400 RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8 R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540 R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0 FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0 Call Trace: <IRQ> tcp_write_timer (net/ipv4/tcp_timer.c:738) call_timer_fn (kernel/time/timer.c:1747) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372) timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135) tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035) __walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1)) tmigr_handle_remote (kernel/time/timer_migration.c:1096) handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580) irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35)) </IRQ> | ||||
| CVE-2025-39953 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cgroup: split cgroup_destroy_wq into 3 workqueues A hung task can occur during [1] LTP cgroup testing when repeatedly mounting/unmounting perf_event and net_prio controllers with systemd.unified_cgroup_hierarchy=1. The hang manifests in cgroup_lock_and_drain_offline() during root destruction. Related case: cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio Call Trace: cgroup_lock_and_drain_offline+0x14c/0x1e8 cgroup_destroy_root+0x3c/0x2c0 css_free_rwork_fn+0x248/0x338 process_one_work+0x16c/0x3b8 worker_thread+0x22c/0x3b0 kthread+0xec/0x100 ret_from_fork+0x10/0x20 Root Cause: CPU0 CPU1 mount perf_event umount net_prio cgroup1_get_tree cgroup_kill_sb rebind_subsystems // root destruction enqueues // cgroup_destroy_wq // kill all perf_event css // one perf_event css A is dying // css A offline enqueues cgroup_destroy_wq // root destruction will be executed first css_free_rwork_fn cgroup_destroy_root cgroup_lock_and_drain_offline // some perf descendants are dying // cgroup_destroy_wq max_active = 1 // waiting for css A to die Problem scenario: 1. CPU0 mounts perf_event (rebind_subsystems) 2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work 3. A dying perf_event CSS gets queued for offline after root destruction 4. Root destruction waits for offline completion, but offline work is blocked behind root destruction in cgroup_destroy_wq (max_active=1) Solution: Split cgroup_destroy_wq into three dedicated workqueues: cgroup_offline_wq – Handles CSS offline operations cgroup_release_wq – Manages resource release cgroup_free_wq – Performs final memory deallocation This separation eliminates blocking in the CSS free path while waiting for offline operations to complete. [1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers | ||||
| CVE-2025-39770 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: gso: Forbid IPv6 TSO with extensions on devices with only IPV6_CSUM When performing Generic Segmentation Offload (GSO) on an IPv6 packet that contains extension headers, the kernel incorrectly requests checksum offload if the egress device only advertises NETIF_F_IPV6_CSUM feature, which has a strict contract: it supports checksum offload only for plain TCP or UDP over IPv6 and explicitly does not support packets with extension headers. The current GSO logic violates this contract by failing to disable the feature for packets with extension headers, such as those used in GREoIPv6 tunnels. This violation results in the device being asked to perform an operation it cannot support, leading to a `skb_warn_bad_offload` warning and a collapse of network throughput. While device TSO/USO is correctly bypassed in favor of software GSO for these packets, the GSO stack must be explicitly told not to request checksum offload. Mask NETIF_F_IPV6_CSUM, NETIF_F_TSO6 and NETIF_F_GSO_UDP_L4 in gso_features_check if the IPv6 header contains extension headers to compute checksum in software. The exception is a BIG TCP extension, which, as stated in commit 68e068cabd2c6c53 ("net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets"): "The feature is only enabled on devices that support BIG TCP TSO. The header is only present for PF_PACKET taps like tcpdump, and not transmitted by physical devices." kernel log output (truncated): WARNING: CPU: 1 PID: 5273 at net/core/dev.c:3535 skb_warn_bad_offload+0x81/0x140 ... Call Trace: <TASK> skb_checksum_help+0x12a/0x1f0 validate_xmit_skb+0x1a3/0x2d0 validate_xmit_skb_list+0x4f/0x80 sch_direct_xmit+0x1a2/0x380 __dev_xmit_skb+0x242/0x670 __dev_queue_xmit+0x3fc/0x7f0 ip6_finish_output2+0x25e/0x5d0 ip6_finish_output+0x1fc/0x3f0 ip6_tnl_xmit+0x608/0xc00 [ip6_tunnel] ip6gre_tunnel_xmit+0x1c0/0x390 [ip6_gre] dev_hard_start_xmit+0x63/0x1c0 __dev_queue_xmit+0x6d0/0x7f0 ip6_finish_output2+0x214/0x5d0 ip6_finish_output+0x1fc/0x3f0 ip6_xmit+0x2ca/0x6f0 ip6_finish_output+0x1fc/0x3f0 ip6_xmit+0x2ca/0x6f0 inet6_csk_xmit+0xeb/0x150 __tcp_transmit_skb+0x555/0xa80 tcp_write_xmit+0x32a/0xe90 tcp_sendmsg_locked+0x437/0x1110 tcp_sendmsg+0x2f/0x50 ... skb linear: 00000000: e4 3d 1a 7d ec 30 e4 3d 1a 7e 5d 90 86 dd 60 0e skb linear: 00000010: 00 0a 1b 34 3c 40 20 11 00 00 00 00 00 00 00 00 skb linear: 00000020: 00 00 00 00 00 12 20 11 00 00 00 00 00 00 00 00 skb linear: 00000030: 00 00 00 00 00 11 2f 00 04 01 04 01 01 00 00 00 skb linear: 00000040: 86 dd 60 0e 00 0a 1b 00 06 40 20 23 00 00 00 00 skb linear: 00000050: 00 00 00 00 00 00 00 00 00 12 20 23 00 00 00 00 skb linear: 00000060: 00 00 00 00 00 00 00 00 00 11 bf 96 14 51 13 f9 skb linear: 00000070: ae 27 a0 a8 2b e3 80 18 00 40 5b 6f 00 00 01 01 skb linear: 00000080: 08 0a 42 d4 50 d5 4b 70 f8 1a | ||||
| CVE-2025-39748 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Forget ranges when refining tnum after JSET Syzbot reported a kernel warning due to a range invariant violation on the following BPF program. 0: call bpf_get_netns_cookie 1: if r0 == 0 goto <exit> 2: if r0 & Oxffffffff goto <exit> The issue is on the path where we fall through both jumps. That path is unreachable at runtime: after insn 1, we know r0 != 0, but with the sign extension on the jset, we would only fallthrough insn 2 if r0 == 0. Unfortunately, is_branch_taken() isn't currently able to figure this out, so the verifier walks all branches. The verifier then refines the register bounds using the second condition and we end up with inconsistent bounds on this unreachable path: 1: if r0 == 0 goto <exit> r0: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0xffffffffffffffff) 2: if r0 & 0xffffffff goto <exit> r0 before reg_bounds_sync: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0) r0 after reg_bounds_sync: u64=[0x1, 0] var_off=(0, 0) Improving the range refinement for JSET to cover all cases is tricky. We also don't expect many users to rely on JSET given LLVM doesn't generate those instructions. So instead of improving the range refinement for JSETs, Eduard suggested we forget the ranges whenever we're narrowing tnums after a JSET. This patch implements that approach. | ||||
| CVE-2025-39681 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper Since 923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot") resctrl_cpu_detect() has been moved from common CPU initialization code to the vendor-specific BSP init helper, while Hygon didn't put that call in their code. This triggers a division by zero fault during early booting stage on our machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale. Add the missing resctrl_cpu_detect() in the Hygon BSP init helper. [ bp: Massage commit message. ] | ||||
| CVE-2025-38704 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix possible invalid rdp's->nocb_cb_kthread pointer access In the preparation stage of CPU online, if the corresponding the rdp's->nocb_cb_kthread does not exist, will be created, there is a situation where the rdp's rcuop kthreads creation fails, and then de-offload this CPU's rdp, does not assign this CPU's rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and rdp's->rdp_gp->nocb_gp_kthread is still valid. This will cause the subsequent re-offload operation of this offline CPU, which will pass the conditional check and the kthread_unpark() will access invalid rdp's->nocb_cb_kthread pointer. This commit therefore use rdp's->nocb_gp_kthread instead of rdp_gp's->nocb_gp_kthread for safety check. | ||||
| CVE-2025-38591 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject narrower access to pointer ctx fields The following BPF program, simplified from a syzkaller repro, causes a kernel warning: r0 = *(u8 *)(r1 + 169); exit; With pointer field sk being at offset 168 in __sk_buff. This access is detected as a narrower read in bpf_skb_is_valid_access because it doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed and later proceeds to bpf_convert_ctx_access. Note that for the "is_narrower_load" case in the convert_ctx_accesses(), the insn->off is aligned, so the cnt may not be 0 because it matches the offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However, the target_size stays 0 and the verifier errors with a kernel warning: verifier bug: error during ctx access conversion(1) This patch fixes that to return a proper "invalid bpf_context access off=X size=Y" error on the load instruction. The same issue affects multiple other fields in context structures that allow narrow access. Some other non-affected fields (for sk_msg, sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for consistency. Note this syzkaller crash was reported in the "Closes" link below, which used to be about a different bug, fixed in commit fce7bd8e385a ("bpf/verifier: Handle BPF_LOAD_ACQ instructions in insn_def_regno()"). Because syzbot somehow confused the two bugs, the new crash and repro didn't get reported to the mailing list. | ||||
| CVE-2025-38322 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix crash in icl_update_topdown_event() The perf_fuzzer found a hard-lockup crash on a RaptorLake machine: Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000 CPU: 23 UID: 0 PID: 0 Comm: swapper/23 Tainted: [W]=WARN Hardware name: Dell Inc. Precision 9660/0VJ762 RIP: 0010:native_read_pmc+0x7/0x40 Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ... RSP: 000:fffb03100273de8 EFLAGS: 00010046 .... Call Trace: <TASK> icl_update_topdown_event+0x165/0x190 ? ktime_get+0x38/0xd0 intel_pmu_read_event+0xf9/0x210 __perf_event_read+0xf9/0x210 CPUs 16-23 are E-core CPUs that don't support the perf metrics feature. The icl_update_topdown_event() should not be invoked on these CPUs. It's a regression of commit: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read") The bug introduced by that commit is that the is_topdown_event() function is mistakenly used to replace the is_topdown_count() call to check if the topdown functions for the perf metrics feature should be invoked. Fix it. | ||||
| CVE-2025-38201 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when resizing hashtable because __GFP_NOWARN is unset. Similar to: b541ba7d1f5a ("netfilter: conntrack: clamp maximum hashtable size to INT_MAX") | ||||