Export limit exceeded: 97852 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (97852 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-48878 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Fix driver shutdown on closed serdev The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194 | ||||
| CVE-2022-48874 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix use-after-free and race in fastrpc_map_find Currently, there is a race window between the point when the mutex is unlocked in fastrpc_map_lookup and the reference count increasing (fastrpc_map_get) in fastrpc_map_find, which can also lead to use-after-free. So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us to both protect the maps list by also taking the &fl->lock spinlock and the reference count, since the spinlock will be released only after. Add take_ref argument to make this suitable for all callers. | ||||
| CVE-2022-48867 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Prevent use after free on completion memory On driver unload any pending descriptors are flushed at the time the interrupt is freed: idxd_dmaengine_drv_remove() -> drv_disable_wq() -> idxd_wq_free_irq() -> idxd_flush_pending_descs(). If there are any descriptors present that need to be flushed this flow triggers a "not present" page fault as below: BUG: unable to handle page fault for address: ff391c97c70c9040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page The address that triggers the fault is the address of the descriptor that was freed moments earlier via: drv_disable_wq()->idxd_wq_free_resources() Fix the use after free by freeing the descriptors after any possible usage. This is done after idxd_wq_reset() to ensure that the memory remains accessible during possible completion writes by the device. | ||||
| CVE-2022-48866 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug. The root case is in missing validation check of actual number of endpoints. Code should not blindly access usb_host_interface::endpoint array, since it may contain less endpoints than code expects. Fix it by adding missing validaion check and print an error if number of endpoints do not match expected number | ||||
| CVE-2022-48855 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix kernel-infoleak for SCTP sockets syzbot reported a kernel infoleak [1] of 4 bytes. After analysis, it turned out r->idiag_expires is not initialized if inet_sctp_diag_fill() calls inet_diag_msg_common_fill() Make sure to clear idiag_timer/idiag_retrans/idiag_expires and let inet_diag_msg_sctpasoc_fill() fill them again if needed. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 instrument_copy_to_user include/linux/instrumented.h:121 [inline] copyout lib/iov_iter.c:154 [inline] _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 copy_to_iter include/linux/uio.h:162 [inline] simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline] netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] __sys_recvfrom+0x795/0xa10 net/socket.c:2097 __do_sys_recvfrom net/socket.c:2115 [inline] __se_sys_recvfrom net/socket.c:2111 [inline] __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3247 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373 netlink_dump_start include/linux/netlink.h:254 [inline] inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341 sock_diag_rcv_msg+0x24a/0x620 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] sock_write_iter+0x594/0x690 net/socket.c:1061 do_iter_readv_writev+0xa7f/0xc70 do_iter_write+0x52c/0x1500 fs/read_write.c:851 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Bytes 68-71 of 2508 are uninitialized Memory access of size 2508 starts at ffff888114f9b000 Data copied to user address 00007f7fe09ff2e0 CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 | ||||
| CVE-2022-48854 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: arc_emac: Fix use after free in arc_mdio_probe() If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf. | ||||
| CVE-2022-48848 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Do not unregister events twice Nicolas reported that using: # trace-cmd record -e all -M 10 -p osnoise --poll Resulted in the following kernel warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1217 at kernel/tracepoint.c:404 tracepoint_probe_unregister+0x280/0x370 [...] CPU: 0 PID: 1217 Comm: trace-cmd Not tainted 5.17.0-rc6-next-20220307-nico+ #19 RIP: 0010:tracepoint_probe_unregister+0x280/0x370 [...] CR2: 00007ff919b29497 CR3: 0000000109da4005 CR4: 0000000000170ef0 Call Trace: <TASK> osnoise_workload_stop+0x36/0x90 tracing_set_tracer+0x108/0x260 tracing_set_trace_write+0x94/0xd0 ? __check_object_size.part.0+0x10a/0x150 ? selinux_file_permission+0x104/0x150 vfs_write+0xb5/0x290 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7ff919a18127 [...] ---[ end trace 0000000000000000 ]--- The warning complains about an attempt to unregister an unregistered tracepoint. This happens on trace-cmd because it first stops tracing, and then switches the tracer to nop. Which is equivalent to: # cd /sys/kernel/tracing/ # echo osnoise > current_tracer # echo 0 > tracing_on # echo nop > current_tracer The osnoise tracer stops the workload when no trace instance is actually collecting data. This can be caused both by disabling tracing or disabling the tracer itself. To avoid unregistering events twice, use the existing trace_osnoise_callback_enabled variable to check if the events (and the workload) are actually active before trying to deactivate them. | ||||
| CVE-2022-48847 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: watch_queue: Fix filter limit check In watch_queue_set_filter(), there are a couple of places where we check that the filter type value does not exceed what the type_filter bitmap can hold. One place calculates the number of bits by: if (tf[i].type >= sizeof(wfilter->type_filter) * 8) which is fine, but the second does: if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG) which is not. This can lead to a couple of out-of-bounds writes due to a too-large type: (1) __set_bit() on wfilter->type_filter (2) Writing more elements in wfilter->filters[] than we allocated. Fix this by just using the proper WATCH_TYPE__NR instead, which is the number of types we actually know about. The bug may cause an oops looking something like: BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740 Write of size 4 at addr ffff88800d2c66bc by task watch_queue_oob/611 ... Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 ... kasan_report.cold+0x7f/0x11b ... watch_queue_set_filter+0x659/0x740 ... __x64_sys_ioctl+0x127/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 611: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 watch_queue_set_filter+0x23a/0x740 __x64_sys_ioctl+0x127/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88800d2c66a0 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 28 bytes inside of 32-byte region [ffff88800d2c66a0, ffff88800d2c66c0) | ||||
| CVE-2022-48837 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: rndis: prevent integer overflow in rndis_set_response() If "BufOffset" is very large the "BufOffset + 8" operation can have an integer overflow. | ||||
| CVE-2022-48820 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable() This error path needs to decrement "usbphyc->n_pll_cons.counter" before returning. | ||||
| CVE-2022-48805 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that. | ||||
| CVE-2022-48787 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iwlwifi: fix use-after-free If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. | ||||
| CVE-2022-48779 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if this is the same as the port's pvid_vlan which we access afterwards, what we're accessing is freed memory. Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior to calling ocelot_vlan_member_del(). | ||||
| CVE-2022-48778 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: gpmi: don't leak PM reference in error path If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be dropped. | ||||
| CVE-2022-48771 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix stale file descriptors on failed usercopy A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded. | ||||
| CVE-2022-48748 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix memory leak in __allowed_ingress When using per-vlan state, if vlan snooping and stats are disabled, untagged or priority-tagged ingress frame will go to check pvid state. If the port state is forwarding and the pvid state is not learning/forwarding, untagged or priority-tagged frame will be dropped but skb memory is not freed. Should free skb when __allowed_ingress returns false. | ||||
| CVE-2022-48742 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink() While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it. | ||||
| CVE-2022-48739 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: hdmi-codec: Fix OOB memory accesses Correct size of iec_status array by changing it to the size of status array of the struct snd_aes_iec958. This fixes out-of-bounds slab read accesses made by memcpy() of the hdmi-codec driver. This problem is reported by KASAN. | ||||
| CVE-2022-48732 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix off by one in BIOS boundary checking Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed. | ||||
| CVE-2022-48726 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Protect mc during concurrent multicast leaves Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list. | ||||