Export limit exceeded: 12132 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (12132 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31476 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: do not expire session on binding failure When a multichannel session binding request fails (e.g. wrong password), the error path unconditionally sets sess->state = SMB2_SESSION_EXPIRED. However, during binding, sess points to the target session looked up via ksmbd_session_lookup_slowpath() -- which belongs to another connection's user. This allows a remote attacker to invalidate any active session by simply sending a binding request with a wrong password (DoS). Fix this by skipping session expiration when the failed request was a binding attempt, since the session does not belong to the current connection. The reference taken by ksmbd_session_lookup_slowpath() is still correctly released via ksmbd_user_session_put(). | ||||
| CVE-2026-31409 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset conn->binding on failed binding request When a multichannel SMB2_SESSION_SETUP request with SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true but never clears it on the error path. This leaves the connection in a binding state where all subsequent ksmbd_session_lookup_all() calls fall back to the global sessions table. This fix it by clearing conn->binding = false in the error path. | ||||
| CVE-2026-31407 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: add missing netlink policy validations Hyunwoo Kim reports out-of-bounds access in sctp and ctnetlink. These attributes are used by the kernel without any validation. Extend the netlink policies accordingly. Quoting the reporter: nlattr_to_sctp() assigns the user-supplied CTA_PROTOINFO_SCTP_STATE value directly to ct->proto.sctp.state without checking that it is within the valid range. [..] and: ... with exp->dir = 100, the access at ct->master->tuplehash[100] reads 5600 bytes past the start of a 320-byte nf_conn object, causing a slab-out-of-bounds read confirmed by UBSAN. | ||||
| CVE-2026-23444 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure ieee80211_tx_prepare_skb() has three error paths, but only two of them free the skb. The first error path (ieee80211_tx_prepare() returning TX_DROP) does not free it, while invoke_tx_handlers() failure and the fragmentation check both do. Add kfree_skb() to the first error path so all three are consistent, and remove the now-redundant frees in callers (ath9k, mt76, mac80211_hwsim) to avoid double-free. Document the skb ownership guarantee in the function's kdoc. | ||||
| CVE-2026-23066 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recvmsg() unconditional requeue If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at the front of the recvmsg queue already has its mutex locked, it requeues the call - whether or not the call is already queued. The call may be on the queue because MSG_PEEK was also passed and so the call was not dequeued or because the I/O thread requeued it. The unconditional requeue may then corrupt the recvmsg queue, leading to things like UAFs or refcount underruns. Fix this by only requeuing the call if it isn't already on the queue - and moving it to the front if it is already queued. If we don't queue it, we have to put the ref we obtained by dequeuing it. Also, MSG_PEEK doesn't dequeue the call so shouldn't call rxrpc_notify_socket() for the call if we didn't use up all the data on the queue, so fix that also. | ||||
| CVE-2025-68307 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_xmit_callback(): fix handling of failed transmitted URBs The driver lacks the cleanup of failed transfers of URBs. This reduces the number of available URBs per error by 1. This leads to reduced performance and ultimately to a complete stop of the transmission. If the sending of a bulk URB fails do proper cleanup: - increase netdev stats - mark the echo_sbk as free - free the driver's context and do accounting - wake the send queue | ||||
| CVE-2025-68239 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: restore write access before closing files opened by open_exec() bm_register_write() opens an executable file using open_exec(), which internally calls do_open_execat() and denies write access on the file to avoid modification while it is being executed. However, when an error occurs, bm_register_write() closes the file using filp_close() directly. This does not restore the write permission, which may cause subsequent write operations on the same file to fail. Fix this by calling exe_file_allow_write_access() before filp_close() to restore the write permission properly. | ||||
| CVE-2025-38627 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic The decompress_io_ctx may be released asynchronously after I/O completion. If this file is deleted immediately after read, and the kworker of processing post_read_wq has not been executed yet due to high workloads, It is possible that the inode(f2fs_inode_info) is evicted and freed before it is used f2fs_free_dic. The UAF case as below: Thread A Thread B - f2fs_decompress_end_io - f2fs_put_dic - queue_work add free_dic work to post_read_wq - do_unlink - iput - evict - call_rcu This file is deleted after read. Thread C kworker to process post_read_wq - rcu_do_batch - f2fs_free_inode - kmem_cache_free inode is freed by rcu - process_scheduled_works - f2fs_late_free_dic - f2fs_free_dic - f2fs_release_decomp_mem read (dic->inode)->i_compress_algorithm This patch store compress_algorithm and sbi in dic to avoid inode UAF. In addition, the previous solution is deprecated in [1] may cause system hang. [1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org | ||||
| CVE-2025-22069 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler Naresh Kamboju reported a "Bad frame pointer" kernel warning while running LTP trace ftrace_stress_test.sh in riscv. We can reproduce the same issue with the following command: ``` $ cd /sys/kernel/debug/tracing $ echo 'f:myprobe do_nanosleep%return args1=$retval' > dynamic_events $ echo 1 > events/fprobes/enable $ echo 1 > tracing_on $ sleep 1 ``` And we can get the following kernel warning: [ 127.692888] ------------[ cut here ]------------ [ 127.693755] Bad frame pointer: expected ff2000000065be50, received ba34c141e9594000 [ 127.693755] from func do_nanosleep return to ffffffff800ccb16 [ 127.698699] WARNING: CPU: 1 PID: 129 at kernel/trace/fgraph.c:755 ftrace_return_to_handler+0x1b2/0x1be [ 127.699894] Modules linked in: [ 127.700908] CPU: 1 UID: 0 PID: 129 Comm: sleep Not tainted 6.14.0-rc3-g0ab191c74642 #32 [ 127.701453] Hardware name: riscv-virtio,qemu (DT) [ 127.701859] epc : ftrace_return_to_handler+0x1b2/0x1be [ 127.702032] ra : ftrace_return_to_handler+0x1b2/0x1be [ 127.702151] epc : ffffffff8013b5e0 ra : ffffffff8013b5e0 sp : ff2000000065bd10 [ 127.702221] gp : ffffffff819c12f8 tp : ff60000080853100 t0 : 6e00000000000000 [ 127.702284] t1 : 0000000000000020 t2 : 6e7566206d6f7266 s0 : ff2000000065bd80 [ 127.702346] s1 : ff60000081262000 a0 : 000000000000007b a1 : ffffffff81894f20 [ 127.702408] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 127.702470] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 127.702530] s2 : ba34c141e9594000 s3 : 0000000000000000 s4 : ff2000000065bdd0 [ 127.702591] s5 : 00007fff8adcf400 s6 : 000055556dc1d8c0 s7 : 0000000000000068 [ 127.702651] s8 : 00007fff8adf5d10 s9 : 000000000000006d s10: 0000000000000001 [ 127.702710] s11: 00005555737377c8 t3 : ffffffff819d899e t4 : ffffffff819d899e [ 127.702769] t5 : ffffffff819d89a0 t6 : ff2000000065bb18 [ 127.702826] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 127.703292] [<ffffffff8013b5e0>] ftrace_return_to_handler+0x1b2/0x1be [ 127.703760] [<ffffffff80017bce>] return_to_handler+0x16/0x26 [ 127.704009] [<ffffffff80017bb8>] return_to_handler+0x0/0x26 [ 127.704057] [<ffffffff800d3352>] common_nsleep+0x42/0x54 [ 127.704117] [<ffffffff800d44a2>] __riscv_sys_clock_nanosleep+0xba/0x10a [ 127.704176] [<ffffffff80901c56>] do_trap_ecall_u+0x188/0x218 [ 127.704295] [<ffffffff8090cc3e>] handle_exception+0x14a/0x156 [ 127.705436] ---[ end trace 0000000000000000 ]--- The reason is that the stack layout for constructing argument for the ftrace_return_to_handler in the return_to_handler does not match the __arch_ftrace_regs structure of riscv, leading to unexpected results. | ||||
| CVE-2024-12146 | 2026-06-01 | 7.5 High | ||
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Finder Fire Safety Finder ERP/CRM (New System) allows SQL Injection. This issue affects Finder ERP/CRM (New System): before 18.12.2024. | ||||
| CVE-2024-12925 | 1 Akinsoft | 1 Qr Menu | 2026-06-01 | 7.3 High |
| Improper Validation of Certificate with Host Mismatch vulnerability in Akınsoft QR Menü allows HTTP Response Splitting. This issue affects QR Menü: from s1.05.05 before v1.05.12. | ||||
| CVE-2024-13068 | 1 Akinsoft | 1 Limondesk | 2026-06-01 | 7.3 High |
| Origin Validation Error vulnerability in Akinsoft LimonDesk allows Forceful Browsing. This issue affects LimonDesk: from s1.02.14 before v1.02.17. | ||||
| CVE-2025-11234 | 1 Redhat | 4 Enterprise Linux, Openshift, Rhel E4s and 1 more | 2026-06-01 | 7.5 High |
| A flaw was found in QEMU. If the QIOChannelWebsock object is freed while it is waiting to complete a handshake, a GSource is leaked. This can lead to the callback firing later on and triggering a use-after-free in the use of the channel. This can be abused by a malicious client with network access to the VNC WebSocket port to cause a denial of service during the WebSocket handshake prior to the VNC client authentication. | ||||
| CVE-2026-46384 | 1 Iskorotkov | 1 Avro | 2026-05-30 | 7.5 High |
| iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, several Avro decoder paths read attacker-controlled 64-bit values from the wire format and either narrowed them to platform-sized int before bounds-checking, or summed them with overflow-prone signed-int arithmetic. On 32-bit targets (GOARCH=386, arm, mips, wasm, etc.), the truncation paths can silently bypass byte-slice limits, select the wrong union branch, or hit the OCF negative-make panic via wrap. Three sub-issues are not 32-bit-specific: cumulative-size arithmetic overflow in arrayDecoder.Decode / mapDecoder.Decode / mapDecoderUnmarshaler.Decode (wraps at math.MaxInt64 on amd64 / arm64 and bypasses MaxSliceAllocSize / MaxMapAllocSize), math.MinInt negation in block-header handling, and make([]byte, size) with a negative size in OCF block reads — all three panic or bypass caps on any platform, giving an attacker a denial-of-service primitive there. This vulnerability is fixed in 2.33.0. | ||||
| CVE-2026-45861 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>. | ||||
| CVE-2026-43503 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker. | ||||
| CVE-2026-45878 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 The address watch clear code receives watch_id as an unsigned value (u32), but some helper functions were using a signed int and checked bits by shifting with watch_id. If a very large watch_id is passed from userspace, it can be converted to a negative value. This can cause invalid shifts and may access memory outside the watch_points array. drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before using it. Also use BIT(watch_id) to test and clear bits safely. This keeps the behavior unchanged for valid watch IDs and avoids undefined behavior for invalid ones. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448 kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow 'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c 433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd, 434 uint32_t watch_id) 435 { 436 int r; 437 438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id)) kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if watch_id is larger than INT_MAX it leads to a buffer overflow. (Negative shifts are undefined). 439 return -EINVAL; 440 441 if (!pdd->dev->kfd->shared_resources.enable_mes) { 442 r = debug_lock_and_unmap(pdd->dev->dqm); 443 if (r) 444 return r; 445 } 446 447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false); --> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch( 449 pdd->dev->adev, 450 watch_id); v2: (as per, Jonathan Kim) - Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to match the clear path. - Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). | ||||
| CVE-2026-46204 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: Prevent OOB reads when parsing IB Rewrite the IB parsing to use amdgpu_ib_get_value() which handles the bounds checks. | ||||
| CVE-2026-46138 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly. | ||||
| CVE-2026-46117 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss() Sashiko points out that the user can specify WQs sharing the same CQ as a part of the uAPI and this will trigger the WARN_ON() then go on to corrupt the kernel. Just reject it outright and fail the QP creation. | ||||