Export limit exceeded: 368661 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 368661 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (368661 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80816 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: Use a private URB for the notification endpoint fcp_init_notify() used mixer->urb, which snd_usb_mixer_status_create() allocates for the optional UAC2 status interrupt endpoint and mixer.c kills, resubmits and frees. On a device with that endpoint, fcp_init_notify()'s "already set up" early return fires on the status URB and returns success without doing anything. No FCP notification URB is submitted, and cmd_done is left zeroed because it is initialised past that early return and nowhere else. fcp_init() then issues init1_opcode and wait_for_completion_timeout() would crash adding to the zeroed wait.head. fcp_cleanup_urb() would also kill and free mixer.c's status URB. Use a separate URB in fcp_data, and initialise cmd_done in fcp_init_private() where fcp_data is allocated. fcp_init_notify() is reached again after suspend via fcp_reinit(), and the URB kill path in fcp_notify() completes cmd_done, leaving a stale count that would satisfy the next command's wait before the device ACKs. Use reinit_completion() to clear it. | ||||
| CVE-2026-80817 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/iommufd: Fix NULL pointer deref in iommufd_ioas_change_process when racing with iopt_map_file_pages iommufd_ioas_change_process() iterates every IOAS area while only holding every IOAS iova_rwsem, so it assumes every area has a non-NULL pages pointer. That assumption can be false when it runs concurrently with iopt_map_file_pages(). iopt_map_pages() executes in two phases. It first creates the area and inserts it into the interval tree under iova_rwsem, with area->pages still NULL. It then drops iova_rwsem and later fills area->pages under domains_rwsem. This leaves a window between area creation and area->pages fill where a concurrent iommufd_ioas_change_process() can observe the area and dereference a NULL area->pages pointer, leading to a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4b655067 P4D 4b655067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 11841 Comm: syz.1.628 Not tainted 7.1.0 #3 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538 Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74 RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246 RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000 RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0 RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000 R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008 R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f4aea3f66c0(0000) GS:ffff8880b1fa1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000004b75c000 CR4: 0000000000350ef0 Call Trace: <TASK> iommufd_fops_ioctl+0x287/0x400 drivers/iommu/iommufd/main.c:533 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x120/0x170 fs/ioctl.c:583 x64_sys_call+0x1092/0x1fb0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x10a/0x680 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f4aec1a82bd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f4aea3f6018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f4aec436090 RCX: 00007f4aec1a82bd RDX: 0000200000000180 RSI: 0000000000003b92 RDI: 0000000000000003 RBP: 00007f4aec250295 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f4aec436128 R14: 00007f4aec436090 R15: 00007ffd04ef23e0 </TASK> Modules linked in: CR2: 00000000000000c0 ---[ end trace 0000000000000000 ]--- RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538 Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74 RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246 RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000 RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0 RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000 R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008 R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f4aea3f66c0(000 ---truncated--- | ||||
| CVE-2026-80819 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept rfcomm_sock_recvmsg() completes a deferred setup by calling rfcomm_dlc_accept() without holding any RFCOMM lock: if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) { rfcomm_dlc_accept(d); return 0; } and rfcomm_dlc_accept() dereferences the session on its first line: struct sock *sk = d->session->sock->sk; Every other path that touches d->session runs under rfcomm_mutex: rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(), rfcomm_dlc_send_rpn(), and the RFCOMM thread through rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as "called under rfcomm_lock()". This call site is the only one that skips it. The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against teardown, since __rfcomm_dlc_close() returns early when it wins the test_and_clear. But rfcomm_recv_disc() forces the state first: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2. With the state already BT_CLOSED that switch does not match, the bit is never consulted, and __rfcomm_dlc_close() falls through to rfcomm_dlc_unlink(), which sets d->session = NULL. So a remote DISC on a deferred dlc clears the session while leaving RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the test_and_clear and dereferences a NULL session. No timing window is needed: once the DISC has been processed, the dereference is unconditional. Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and re-checks the session, around a __rfcomm_dlc_accept() that the two in-core callers, which already hold the mutex, keep using. Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session, opens a dlc on a channel bound with BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on the accepted socket then hits: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rfcomm_dlc_accept+0x54/0x350 Call Trace: rfcomm_sock_recvmsg+0x1cd/0x230 sock_recvmsg+0x166/0x1c0 __sys_recvfrom+0x20d/0x300 0x10 is the offset of sock in struct rfcomm_session. With this patch the same run completes with recv() returning 0 and no report, and lockdep stays quiet, confirming rfcomm_mutex is still taken before lock_sock on this path as it is on the thread side. | ||||
| CVE-2026-80820 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't livelock in scrub on a circular unlinked list LOLLM points out that online fsck can livelock if an unlinked inode list contains a loop. Use a bitmap to detect cycles. | ||||
| CVE-2026-80821 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: put CQ ref on create_cq mapping failure nvmet_pci_epf_create_cq() calls nvmet_cq_create(), which takes a reference on the controller and installs the completion queue. If the subsequent PCI address-space mapping fails or returns a too-small partial mapping, the function jumps to err_internal / err_unmap_queue without calling nvmet_cq_put(). The matching put in nvmet_pci_epf_delete_cq() is gated on NVMET_PCI_EPF_Q_LIVE, which is only set after the mapping succeeds, so teardown never releases these references. A remote PCI host that drives Create IO CQ commands with a failing PRP1/pci_addr therefore leaks the CQ and a controller reference on each attempt. Drop the CQ reference on the mapping-failure paths. The err_internal and err_unmap_queue labels are only reachable after nvmet_cq_create() has succeeded, so this pairs the create/put correctly. | ||||
| CVE-2026-80822 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf() Add a check to see if devm_kasprintf() is not NULL in mchp_ipc_get_cluster_aggr_irq(), returning -ENOMEM if the function failed. | ||||
| CVE-2026-15316 | 1 Tp-link | 3 Tapo C200, Tapo C200 Firmware, Tapo C200 V5 | 2026-09-04 | 6.5 Medium |
| An improper input validation vulnerability in the configuration service for processing encrypted credential data has been identified in Tapo C200 v5. An attacker can send oversized crypted ciphertext values that may trigger exception handling failures, due to insufficient validation, causing the affected device to crash or restart. Successful exploitation may temporarily disrupt HTTPS management and monitoring functionality, resulting in a denial-of-service (DoS) condition until the service recovers. | ||||
| CVE-2026-75618 | 1 Tp-link | 6 Tapo C100, Tapo C100 Firmware, Tapo C100 V5 and 3 more | 2026-09-04 | 6.5 Medium |
| Tapo C100/C101 V5 contains a null pointer dereference vulnerability in the RTSP service. An attacker on the local network can send specially crafted requests that cause the service to dereference an invalid pointer, resulting in a service crash and device reboot. Successful exploitation can disrupt live video streaming functionality and cause a temporary denial-of-service condition. | ||||
| CVE-2026-18745 | 2026-09-04 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-80906 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: packet: fix wrong transport_header when sending VLAN-tagged frame In packet_parse_headers(), when processing a VLAN-tagged frame, skb_set_network_header() is called to advance network_header past the VLAN tag to the inner protocol header. skb_probe_transport_header() is then called with skb->protocol still set to the outer VLAN EtherType (e.g. ETH_P_8021Q), while nhoff (derived from skb_network_offset()) already points past the VLAN tag to the inner protocol header. In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it reads a struct vlan_hdr at nhoff via __skb_header_pointer(), but that offset contains the inner protocol header (e.g. an IP header). The bytes are misinterpreted as a VLAN header, yielding a garbage encapsulated EtherType that matches no known protocol. The dissector returns false, so skb_probe_transport_header() never calls skb_set_transport_header(), leaving transport_header at its uninitialized sentinel value (~0U). Move skb_probe_transport_header() to before skb_set_network_header(). At the time skb_probe_transport_header() is called, network_header still points to the VLAN header, so nhoff correctly points to the VLAN header. The flow dissector can then parse the VLAN header, extract the inner EtherType, and advance nhoff to the inner protocol header, allowing transport_header to be set correctly. | ||||
| CVE-2026-85547 | 1 Misp | 1 Misp | 2026-09-04 | N/A |
| A cross-site request forgery (CSRF) vulnerability exists in MISP due to form-security and CSRF protections being disabled based on whether an incoming request was identified as a REST request. MISP's REST detection can be influenced by request properties such as the URL suffix or the HTTP Accept header. Because Accept: application/json can be supplied by a cross-origin page without requiring a CORS preflight, an attacker could cause a request originating from another website to be treated as REST traffic. MISP would consequently disable its normal form-security and CSRF validation even though the request was authenticated using the victim's existing browser session. An unauthenticated remote attacker could exploit this behavior by convincing an authenticated MISP user to visit or interact with a malicious web page. The attacker's page could then issue crafted requests to susceptible state-changing MISP endpoints using the victim's privileges. Depending on the permissions of the victim and the targeted endpoint, this could allow unauthorized modification, creation, publication, or removal of data and other state changes. The vulnerability originates from granting the form-security exemption based on _isRest() rather than on the authentication mechanism used by the request. The patch changes this behavior so that CSRF and form-security exemptions are granted only when the request actually carries a MISP API key. Session-authenticated REST-style requests remain subject to CSRF protection. The fix also introduces support for transmitting CSRF tokens through the X-CSRF-Token header for legitimate same-origin AJAX requests. Such a header cannot normally be attached by a cross-origin page without triggering a CORS preflight, preventing it from being used to reproduce the original attack. | ||||
| CVE-2026-85541 | 1 Interinfo | 1 Dreammaker | 2026-09-04 | 5.4 Medium |
| DreamMaker developed by Interinfo has a Reflected Cross-site Scripting vulnerability. Authenticated remote attackers can execute arbitrary JavaScript codes in user's browser via a malicious website. | ||||
| CVE-2026-85508 | 1 Freeipmi | 1 Freeipmi | 2026-09-04 | 9.8 Critical |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_ipv6_info in ipmi-oem/ipmi-oem-dell.c (cmc-ipv6-info subcommand to dell get-system-info). | ||||
| CVE-2026-85405 | 1 Eleveo | 1 Call Recording Software | 2026-09-04 | 3.5 Low |
| A flaw has been found in Eleveo Call Recording Software 9.7.0. This affects an unknown part of the file /callrec/roleAddAction.do. Executing a manipulation of the argument name/username can lead to cross site scripting. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-85398 | 1 Code-projects | 1 Hospital Information System | 2026-09-04 | 7.3 High |
| A vulnerability was identified in code-projects Hospital Information System 1.0. Affected is the function viewReq of the file viewReq.php. Such manipulation of the argument ID leads to sql injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-85380 | 1 Light0011 | 1 Cms | 2026-09-04 | 7.3 High |
| A weakness has been identified in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. This vulnerability affects the function catchimage of the file Public/ueditor/php/controller.php of the component UEditor. This manipulation of the argument source[] causes server-side request forgery. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-84832 | 1 Seppmail | 1 Seppmail Secure Email Gateway | 2026-09-04 | N/A |
| SEPPmail Secure Email Gateway before 15.0.6 deserializes attacker-controlled data in a privileged REST import workflow without adequate validation. An attacker with a privileged API token can execute arbitrary commands with "nobody" privileges. | ||||
| CVE-2026-84504 | 1 Fastify | 1 Fastify | 2026-09-04 | 8.1 High |
| fastify versions before 5.12.2 treat the object resolved by a successful Ajv async validator as the value result protocol used by custom validator compilers. If a request that passes its route schema contains a property named value at the root, fastify replaces the entire request body with that property's value before the handler runs, so the handler receives a different object than the one that satisfied the schema. An authenticated low-privilege caller can use this to make nested data replace the validated body and trigger an operation the route schema did not authorize, leading to unauthorized state changes and data disclosure. Users should upgrade to fastify 5.12.2 or later. | ||||
| CVE-2026-84045 | 2026-09-04 | 5.3 Medium | ||
| The E-cab Taxi Booking Manager for Woocommerce WordPress plugin before 2.0.5 does not validate a client-supplied trip distance and base-price value on the server before pricing a booking, allowing unauthenticated attackers to manipulate the order total down to zero and place real taxi-booking orders at an arbitrary price. | ||||
| CVE-2026-84044 | 2026-09-04 | 5.3 Medium | ||
| The Restaurant Menu and Food Ordering WordPress plugin before 2.4.12 does not verify that a PayPal payment notification genuinely originates from PayPal, allowing unauthenticated attackers to forge a payment notification and mark their own order as paid and completed without making any payment. | ||||