Export limit exceeded: 12709 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (12709 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-34040 | 2 Docker, Moby | 2 Engine, Moby | 2026-06-16 | 8.8 High |
| Moby is an open source container framework. Prior to version 29.3.1, a security vulnerability has been detected that allows attackers to bypass authorization plugins (AuthZ). This issue has been patched in version 29.3.1. | ||||
| CVE-2026-45998 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential UAF after skb_unshare() failure If skb_unshare() fails to unshare a packet due to allocation failure in rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread()) will be NULL'd out. This will likely cause the call to trace_rxrpc_rx_done() to oops. Fix this by moving the unsharing down to where rxrpc_input_call_event() calls rxrpc_input_call_packet(). There are a number of places prior to that where we ignore DATA packets for a variety of reasons (such as the call already being complete) for which an unshare is then avoided. And with that, rxrpc_input_packet() doesn't need to take a pointer to the pointer to the packet, so change that to just a pointer. | ||||
| CVE-2026-46000 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix conn-level packet handling to unshare RESPONSE packets The security operations that verify the RESPONSE packets decrypt bits of it in place - however, the sk_buff may be shared with a packet sniffer, which would lead to the sniffer seeing an apparently corrupt packet (actually decrypted). Fix this by handing a copy of the packet off to the specific security handler if the packet was cloned. | ||||
| CVE-2026-20262 | 1 Cisco | 1 Catalyst Sd-wan Manager | 2026-06-16 | 6.5 Medium |
| A vulnerability in the web UI of Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, could allow an authenticated, remote attacker to create a file or overwrite any file on the filesystem of an affected system. This vulnerability exists because the affected software does not properly validate user-supplied input during a file upload process. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected API endpoint of the affected system. A successful exploit could allow the attacker to create or overwrite any file on the underlying operating system. This file could later be used to elevate to root. To exploit this vulnerability, the attacker must have valid credentials with at least a lower-privileged, single-task user account. | ||||
| CVE-2026-45447 | 1 Openssl | 1 Openssl | 2026-06-16 | 8.8 High |
| Issue summary: A specially crafted PKCS#7 or S/MIME signed message could trigger a use-after-free during PKCS#7 signature verification. Impact summary: A use-after-free may result in process crashes, heap corruption, or potentially remote code execution. When processing a PKCS#7 or S/MIME signed message, if the SignedData digestAlgorithms field is present as an empty ASN.1 SET, OpenSSL may incorrectly free a caller-owned BIO during PKCS7_verify(). A subsequent use of the BIO by the calling application results in a use-after-free condition. In the common case this occurs when the application later calls BIO_free() on the BIO originally passed to PKCS7_verify(). Depending on allocator behavior and application-specific BIO usage patterns, this may result in a crash or other memory corruption. In some application contexts this may potentially be exploitable for remote code execution. Applications that process PKCS#7 or S/MIME signed messages using OpenSSL PKCS#7 APIs may be affected. Applications using the CMS APIs for this processing are not affected. The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. | ||||
| CVE-2026-46447 | 1 Openstack | 1 Ironic | 2026-06-15 | 5.8 Medium |
| OpenStack Ironic before 35.0.2 allows Boot Script Injection of an iPXE script if the attacker can set node.driver_info or node.instance_info. | ||||
| CVE-2026-53606 | 1 Apostrophecms | 1 Sanitize-html | 2026-06-15 | 5.4 Medium |
| ApostropheCMS is an open-source Node.js content management system, and sanitize-html provides a simple HTML sanitizer with a clear API. Versions of sanitize-html prior to 2.17.5 use `allowedSchemesAppliedToAttributes` (default: `['href', 'src', 'cite']`) to gate the `naughtyHref()` function that blocks dangerous URI schemes like `javascript:` and `vbscript:`. The HTML specification defines 10+ attributes that accept URIs (`action`, `formaction`, `data`, `poster`, `background`, `ping`, `xlink:href`, `dynsrc`, `lowsrc`), but none of these are included in the default gate list. When a developer allows any of these attributes in their configuration, `javascript:` URIs pass through completely unmodified, enabling XSS. Version 2.17.5 patches the issue. | ||||
| CVE-2026-45502 | 1 Microsoft | 5 Exchange Server, Exchange Server 2016, Exchange Server 2019 and 2 more | 2026-06-15 | 5 Medium |
| Server-side request forgery (ssrf) in Microsoft Exchange Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-53607 | 1 Apostrophecms | 1 Apostrophecms | 2026-06-15 | 3.7 Low |
| ApostropheCMS is an open-source Node.js content management system. In versions up to and including 4.30.0, when `prettyUrls: true` is enabled on `@apostrophecms/file` (a documented SEO feature for serving uploaded files at clean URLs), the public pretty-URL handler builds the upstream URL using the raw `Host` HTTP request header. That URL is then `fetch`'ed and the response body + headers are streamed straight back to the requester. Because `Host` is fully attacker-controlled, an unauthenticated remote attacker can pivot the apostrophe process to issue outbound HTTP requests against any host it can reach on the private network. The path component is constrained to `/uploads/attachments/<cuid>-<slug>.<ext>` (built from a local-DB lookup), which keeps the impact narrow: cross-instance data exfiltration is neutralized by cuid uniqueness, but blind-SSRF residuals remain (network-topology mapping via response-code / timing differences and verbose proxy/WAF 404 body disclosure). As of time of publication, no known patched versions exist. | ||||
| CVE-2026-53609 | 1 Apostrophecms | 1 Apostrophecms | 2026-06-15 | 9.1 Critical |
| ApostropheCMS is an open-source Node.js content management system. In versions up to and including 4.30.0, `apos.util.set()` traverses dot-notation paths without sanitizing `__proto__`, allowing an authenticated editor to write arbitrary values to `Object.prototype` via the `$pullAll` patch operator. A confirmed gadget in `publicApiCheck()` causes this to bypass authorization on all piece-type REST API endpoints for every subsequent unauthenticated request, for the lifetime of the Node.js process. As of time of publication, no known patched versions are available. | ||||
| CVE-2026-53608 | 1 Apostrophecms | 1 Apostrophecms | 2026-06-15 | 8.7 High |
| ApostropheCMS is an open-source Node.js content management system. Versions up to and including 1.4.2 of the `@apostrophecms/seo` package injects the Google Analytics Tracking ID (`seoGoogleTrackingId`) and Google Tag Manager ID (`seoGoogleTagManager`) directly into `<script>` tag bodies using JavaScript template literals without any sanitization or validation. Any user with editor-level access (the default role for content managers) can set these fields to a malicious value, resulting in stored XSS that executes on every page for every visitor of the site. As of time of publication, no known patched versions are available. | ||||
| CVE-2026-20251 | 1 Splunk | 4 Splunk, Splunk Cloud Platform, Splunk Enterprise and 1 more | 2026-06-15 | 8.8 High |
| In Splunk Enterprise versions below 10.2.4, 10.0.7, 9.4.12, and 9.3.13, Splunk Cloud Platform versions below 10.3.2512.12, 10.2.2510.14, 10.1.2507.22, and 9.3.2411.132, and Splunk Secure Gateway versions below 3.10.6, 3.9.20, and 3.8.67, a low-privileged user that does not hold the 'admin' or 'power' Splunk roles could perform a Remote Code Execution (RCE) through the Splunk Secure Gateway app.<br><br>The Remote Code Execution is possible because of unsafe deserialization of App Key Value Store (KV Store) data through the ‘jsonpickle’ Python library, which reconstructs arbitrary Python objects from specially crafted JavaScript Object Notation (JSON) without adequate validation. | ||||
| CVE-2026-47210 | 1 Patriksimek | 1 Vm2 | 2026-06-13 | 9.8 Critical |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, a sandbox escape vulnerability in vm2 allows arbitrary code execution in the host process when untrusted code is executed with async support on runtimes exposing WebAssembly JSPI (WebAssembly.promising / WebAssembly.Suspending). In the tested configuration, a JSPI-backed Promise can reach Promise.prototype.finally() in a way that bypasses the expected Promise-species hardening and exposes a host-originated rejection object to attacker-controlled species logic, breaking the sandbox boundary. This issue has been patched in version 3.11.4. | ||||
| CVE-2026-45484 | 1 Microsoft | 3 Sharepoint Server, Sharepoint Server 2016, Sharepoint Server 2019 | 2026-06-12 | 8.8 High |
| Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to elevate privileges over a network. | ||||
| CVE-2026-53435 | 2 Jenkins, Jenkins Project | 2 Jenkins, Jenkins | 2026-06-12 | 8.8 High |
| In Jenkins 2.567 and earlier, LTS 2.555.2 and earlier, it is possible for attackers to have Jenkins deserialize arbitrary types defined in Jenkins core or plugins from an attacker-controlled `config.xml` submission in a way that allows them to handle HTTP requests afterwards. This can be used to impersonate any user and send HTTP requests on their behalf, up to and including use of the Script Console to run arbitrary code, or to read arbitrary files from the Jenkins controller. | ||||
| CVE-2026-43494 | 1 Linux | 1 Linux Kernel | 2026-06-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(), the pinned pages are released with put_page(), and rm->data.op_mmp_znotifier is cleared. But we fail to properly clear rm->data.op_nents. Later when rds_message_purge() is called from rds_sendmsg() the cleanup loop iterates over the incorrectly non zero number of op_nents and frees them again. Fix this by properly resetting op_nents when it should be in rds_message_zcopy_from_user(). | ||||
| CVE-2025-71190 | 1 Linux | 1 Linux Kernel | 2026-06-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: bcm-sba-raid: fix device leak on probe Make sure to drop the reference taken when looking up the mailbox device during probe on probe failures and on driver unbind. | ||||
| CVE-2026-23005 | 1 Linux | 1 Linux Kernel | 2026-06-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1 When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in response to a guest WRMSR, clear XFD-disabled features in the saved (or to be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for features that are disabled via the guest's XFD. Because the kernel executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1 will cause XRSTOR to #NM and panic the kernel. E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848 Modules linked in: kvm_intel kvm irqbypass CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 switch_fpu_return+0x4a/0xb0 kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1, and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's call to fpu_update_guest_xfd(). and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867 Modules linked in: kvm_intel kvm irqbypass CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 fpu_swap_kvm_fpstate+0x6b/0x120 kvm_load_guest_fpu+0x30/0x80 [kvm] kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The new behavior is consistent with the AMX architecture. Per Intel's SDM, XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD (and non-compacted XSAVE saves the initial configuration of the state component): If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i, the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1; instead, it operates as if XINUSE[i] = 0 (and the state component was in its initial state): it saves bit i of XSTATE_BV field of the XSAVE header as 0; in addition, XSAVE saves the initial configuration of the state component (the other instructions do not save state component i). Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using a constant XFD based on the set of enabled features when XSAVEing for a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled features can only happen in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, because fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the outgoing FPU state with the current XFD; and that is (on all but the first WRMSR to XFD) the guest XFD. Therefore, XFD can only go out of sync with XSTATE_BV in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, and it we can consider it (de facto) part of KVM ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features. [Move clea ---truncated--- | ||||
| CVE-2026-23076 | 1 Linux | 1 Linux Kernel | 2026-06-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix potential OOB access in audio mixer handling In the audio mixer handling code of ctxfi driver, the conf field is used as a kind of loop index, and it's referred in the index callbacks (amixer_index() and sum_index()). As spotted recently by fuzzers, the current code causes OOB access at those functions. | UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48 | index 8 is out of range for type 'unsigned char [8]' After the analysis, the cause was found to be the lack of the proper (re-)initialization of conj field. This patch addresses those OOB accesses by adding the proper initializations of the loop indices. | ||||
| CVE-2026-22976 | 1 Linux | 1 Linux Kernel | 2026-06-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset `qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the class itself is active. Two qfq_class objects may point to the same leaf_qdisc. This happens when: 1. one QFQ qdisc is attached to the dev as the root qdisc, and 2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get() / qdisc_put()) and is pending to be destroyed, as in function tc_new_tfilter. When packets are enqueued through the root QFQ qdisc, the shared leaf_qdisc->q.qlen increases. At the same time, the second QFQ qdisc triggers qdisc_put and qdisc_destroy: the qdisc enters qfq_reset() with its own q->q.qlen == 0, but its class's leaf qdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivate an inactive aggregate and trigger a null-deref in qfq_deactivate_agg: [ 0.903172] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 0.903571] #PF: supervisor write access in kernel mode [ 0.903860] #PF: error_code(0x0002) - not-present page [ 0.904177] PGD 10299b067 P4D 10299b067 PUD 10299c067 PMD 0 [ 0.904502] Oops: Oops: 0002 [#1] SMP NOPTI [ 0.904737] CPU: 0 UID: 0 PID: 135 Comm: exploit Not tainted 6.19.0-rc3+ #2 NONE [ 0.905157] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 0.905754] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2)) [ 0.906046] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0 Code starting with the faulting instruction =========================================== 0: 0f 84 4d 01 00 00 je 0x153 6: 48 89 70 18 mov %rsi,0x18(%rax) a: 8b 4b 10 mov 0x10(%rbx),%ecx d: 48 c7 c2 ff ff ff ff mov $0xffffffffffffffff,%rdx 14: 48 8b 78 08 mov 0x8(%rax),%rdi 18: 48 d3 e2 shl %cl,%rdx 1b: 48 21 f2 and %rsi,%rdx 1e: 48 2b 13 sub (%rbx),%rdx 21: 48 8b 30 mov (%rax),%rsi 24: 48 d3 ea shr %cl,%rdx 27: 8b 4b 18 mov 0x18(%rbx),%ecx ... [ 0.907095] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246 [ 0.907368] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000 [ 0.907723] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.908100] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000 [ 0.908451] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000 [ 0.908804] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880 [ 0.909179] FS: 000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000 [ 0.909572] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.909857] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0 [ 0.910247] PKRU: 55555554 [ 0.910391] Call Trace: [ 0.910527] <TASK> [ 0.910638] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1485) [ 0.910826] qdisc_reset (include/linux/skbuff.h:2195 include/linux/skbuff.h:2501 include/linux/skbuff.h:3424 include/linux/skbuff.h:3430 net/sched/sch_generic.c:1036) [ 0.911040] __qdisc_destroy (net/sched/sch_generic.c:1076) [ 0.911236] tc_new_tfilter (net/sched/cls_api.c:2447) [ 0.911447] rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) [ 0.911663] ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6861) [ 0.911894] netlink_rcv_skb (net/netlink/af_netlink.c:2550) [ 0.912100] netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) [ 0.912296] ? __alloc_skb (net/core/skbuff.c:706) [ 0.912484] netlink_sendmsg (net/netlink/af ---truncated--- | ||||