Export limit exceeded: 25203 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25203 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-100072 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: platform: Use acpi_bus_get_primary_device() The acpi_get_first_physical_node() usage in acpi_platform_fill_resource() and acpi_create_platform_device() is generally unsafe because in theory the device returned by it may be freed at any time [1]. It is also inefficient because acpi_get_first_physical_node() is called multiple times for the same argument which can be avoided. Address these issues by using acpi_bus_get_primary_device() instead of acpi_get_first_physical_node() and adjusting the code to call it just once at the beginning of and acpi_create_platform_device() and drop the device reference acquired by it upon the return from that function. | ||||
| CVE-2026-97968 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Create debugfs entries after hwmon registration ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. It runs before hwmon_device_register_with_info(), so when that registration fails, ccp_probe() returns with the files still in place. The HID core then frees ccp, and ccp_remove() is not called for a failed probe, so nothing removes them later either. Reading one of the files dereferences the freed pointer. Create the debugfs entries only after the hwmon device has been registered, so no failing path can leave them behind. The two version queries stay where they are. They send USB commands without holding ccp->mutex, which is only safe as long as nothing else can call send_usb_cmd(); once the hwmon device is registered its callbacks can do so concurrently. Only the debugfs creation moves, and it is told which queries succeeded. | ||||
| CVE-2026-97989 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vduse: validate virtqueue alignment vduse_validate_config() only checks the upper bound of vq_align. Invalid values can therefore reach vring_create_virtqueue_map(). The split-ring helpers use align - 1 as a bit mask, so the alignment must be a non-zero power of two. A zero value makes vring_size() drop the descriptor and available-ring part and vring_init() leave the used ring pointer NULL. The VIRTIO spec requires the used ring to start at an address aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as well as non-power-of-two values before they reach the virtio ring helpers. Opening a virtio-net device created with vq_align=0 triggered: BUG: KASAN: null-ptr-deref in virtqueue_kick_prepare_split+0xe3/0x100 Read of size 2 at addr 0000000000000000 by task systemd-network/1062 Call Trace (relevant frames): dump_stack_lvl print_report kasan_report __asan_load2 virtqueue_kick_prepare_split+0xe3/0x100 virtqueue_kick_prepare+0x40/0x60 try_fill_recv+0x857/0x1250 virtnet_open+0x189/0x460 __dev_open+0x225/0x390 __dev_change_flags+0x368/0x3b0 netif_change_flags+0x56/0xc0 do_setlink.isra.0+0x68c/0x1e30 Validate the value before it reaches the virtio ring helpers. | ||||
| CVE-2026-97992 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: protect config_ctx from being freed under the config callback vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking a reference and without holding any lock: struct eventfd_ctx *config_ctx = v->config_ctx; if (config_ctx) eventfd_signal(config_ctx); VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally the last reference to the old context: swap(ctx, v->config_ctx); if (ctx) eventfd_ctx_put(ctx); eventfd_ctx_put() drops the last kref and frees the context immediately, with no RCU grace period, so a callback that has already loaded the pointer goes on to dereference freed memory. The two sides share no lock: the ioctl runs under vhost_dev.mutex, while the parent invokes the callback from its own interrupt or workqueue context. This is not the reopen refcount underflow fixed by commit f6bbf0010ba0 ("vhost-vdpa: fix use-after-free of v->config_ctx"), which was about vhost_vdpa_config_put() leaving a stale pointer behind. Here the pointer is maintained correctly and it is the read side that is unprotected. With VDUSE as the parent this is reachable from userspace with access to /dev/vduse (root by default). VDUSE_DEV_INJECT_CONFIG_IRQ queues dev->inject, and vduse_dev_irq_inject() runs the callback under VDUSE's own dev->irq_lock, which vhost does not hold. vduse_dev_reset() does flush_work(&dev->inject), but VHOST_VDPA_SET_CONFIG_CALL never goes through reset, so an inject already in flight is not waited for. A process that injects config interrupts on the VDUSE fd while another thread swaps the call fd on the vhost-vdpa fd hits it in seconds: BUG: KASAN: slab-use-after-free in native_queued_spin_lock_slowpath Read of size 4 at addr ffff888107d21808 by task kworker/u17:1/2993 Workqueue: vduse-irq vduse_dev_irq_inject Call Trace: native_queued_spin_lock_slowpath+0x97/0x5b0 _raw_spin_lock_irqsave+0xd4/0xe0 eventfd_signal_mask+0x69/0x120 vhost_vdpa_config_cb+0x34/0x50 vduse_dev_irq_inject+0x46/0x60 process_one_work+0x468/0x950 Allocated by task 2992: do_eventfd+0x50/0x200 __x64_sys_eventfd2+0x2e/0x40 Freed by task 2992: eventfd_ctx_put+0xb9/0xc0 vhost_vdpa_unlocked_ioctl+0x116c/0x2190 Add a spinlock covering every access to config_ctx, so the callback either signals a context that is still alive or observes NULL, and the put happens only once no callback can reach the old value. Clearing the parent's callback before the put would not be enough: of the in-tree set_config_cb() implementations only VDUSE takes a lock, the rest store the pointer unlocked, so that would not order against an in-flight invocation. | ||||
| CVE-2026-100073 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix transaction overflow during writeback Commit 95ad8ee45cdb ("ext4: correct the reserved credits for extent conversion") was correct to note that we need to reserve enough credits for all extents possibly underlying a large folio. However it was too eager to reduce the number of reserved credits. Extent conversion may not only need to touch several leaf extent blocks, it may also need to split extents - for example a single large unwritten extent may need to be split into many small written ones in case of sparse folio dirtying. This can thus result not only in extent leaf modifications but also in a need to allocate new extent tree nodes. As a result the reserved transaction credits were not sufficient in some corner cases. Use ext4_meta_trans_blocks() for correct upper bound credit estimate. | ||||
| CVE-2026-97996 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio: fix use-after-free in unregister_virtio_device() device_unregister() is device_del() plus put_device(). When the caller holds no extra reference, that drops the last one and runs the release callback, which for several transports frees the memory the embedded struct virtio_device sits in. unregister_virtio_device() then calls virtio_debug_device_exit(), which reads dev->debugfs_dir out of the freed object. Affected transports are the ones whose release callback frees and whose remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml, mlxbf-tmfifo and virtio_ccw. virtio_pci is unaffected because virtio_pci_remove() brackets the call with get_device() and put_device(). Remove the debugfs entries before the device can go away. They are only accessed through the protected debugfs interface, so debugfs_remove_recursive() waits for in-progress file operations before returning. Tearing them down while the device is still alive is therefore safe. Reproduced on User-Mode Linux with CONFIG_KASAN and CONFIG_VIRTIO_DEBUG by unbinding a virtio-uml device: BUG: KASAN: slab-use-after-free in virtio_debug_device_exit+0x36/0x4d Read of size 8 at addr 00000000616e0b10 by task init/1 __asan_report_load8_noabort virtio_debug_device_exit+0x36/0x4d unregister_virtio_device+0x48/0x75 virtio_uml_remove platform_remove device_release_driver_internal unbind_store Freed by task 1: kfree virtio_uml_release_dev device_release kobject_put put_device device_unregister With this applied, the report is gone and unbind is clean. | ||||
| CVE-2026-98045 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark faultable stack helpers as sleepable The faultable variants of bpf_get_stack() and bpf_get_task_stack() pass may_fault=true into the common stack collection code. Resolving user-space build IDs may then call build_id_parse_file() and block on filesystem reads. Neither helper prototype sets might_sleep. Since prototype selection uses the sleepability of the whole program, the verifier can still allow these helpers from a non-sleepable region within that program, such as an explicit RCU or preemption-disabled region. The task-stack helper can also be called from a non-sleepable timer callback of a sleepable program. Mark both faultable prototypes as sleepable. The existing helper context check then rejects these calls while continuing to allow them in genuinely sleepable contexts. | ||||
| CVE-2026-98000 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: Fix potential UAF in pec_store Sashiko reports: In pec_store(), a guard(mutex)(&hwdev->lock) is taken. If the chip write operation returns an error other than -EOPNOTSUPP, the code jumps to the put label, which calls put_device(hdev). If this drops the final reference, the device is freed. When the function then returns, the guard cleanup function runs and attempts to unlock the freed mutex. Use scoped_guard() instead of guard() to avoid the problem. | ||||
| CVE-2026-98002 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix ineffective error check in nested domain allocation amd_iommu_pdom_id_alloc() returns an int: a domain ID on success, or the negative errno from ida_alloc_range() when the ID space is exhausted or memory is short. amd_iommu_alloc_domain_nested() stores that return value in gdom_info->hdom_id, which is a u32, and only then tests it: gdom_info->hdom_id = amd_iommu_pdom_id_alloc(); if (gdom_info->hdom_id <= 0) { The assignment discards the sign, so -ENOSPC becomes 0xffffffe4 and the test never fires. The nested domain is then set up with a host domain ID that was never allocated, instead of the allocation failing with -ENOSPC. Keep the value in an int, test it there, and store it only once it is known to be valid, which is what the other amd_iommu_pdom_id_alloc() callers already do. | ||||
| CVE-2026-98003 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Do not reallocate GA log buffers on resume Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement") moved the GA log allocation from iommu_init_pci() to enable_iommus_vapic(), which is called on every resume. iommu_init_ga_log() assigns iommu->ga_log and iommu->ga_log_tail unconditionally. Each resume therefore replaces the boot-time pointers and leaks both old allocations. The function also uses GFP_KERNEL from a syscore resume callback, where interrupts are disabled and the non-boot CPUs are offline. Return early if both buffers are already allocated. Clear the pointers in free_ga_log() so a partial allocation failure cannot leave ga_log dangling. | ||||
| CVE-2026-98005 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: delimit inode_share cache key components Previously, inode_share keys were encoded as follows: fingerprint || domain_id It would be better to have a separator between the fingerprint and domain ID so that the fingerprint won't be parsed as part of a domain ID. Change the key encoding as follows: domain_id || '\0' || fingerprint Since domain_id is a NUL-terminated string, this makes the in-memory key indices unambiguous. | ||||
| CVE-2026-98018 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp: i3c: serialize probe with bus removal mctp_i3c_probe() drops busdevs_lock after finding the matching bus. A concurrent I3C_NOTIFY_BUS_REMOVE can then unregister and free the bus netdev before probe passes its private data to mctp_i3c_add_device(). The latter consequently adds a list node through a freed mbus pointer. Keep busdevs_lock held until the device has been added. This also satisfies the __must_hold annotation on mctp_i3c_add_device(). | ||||
| CVE-2026-98001 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. ltc428_clk_provider_setup() does not fill in any parent clocks, and assumes that init.num_parents is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-98019 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: mark a NULL call argument precise check_func_arg() allows bpf_register_is_null() for nullable arguments w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. check_helper_call() enforces second parameter of the bpf_get_local_storage() to be zero, w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. Grouping these two into one patch, as they share the same fixes tag. | ||||
| CVE-2026-98034 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark NULL kptr stores precise check_map_kptr_access() permits a scalar store into an untrusted kptr field only when the register is known to contain zero. Unlike other verifier checks whose outcome depends on a scalar value, it does not mark that register precise. A state checkpoint reached with an imprecise zero can therefore prune a second path that reaches the store with an arbitrary nonzero scalar. The program can write attacker-controlled bits into the kptr field and load them back as a PTR_TO_BTF_ID. Call mark_chain_precision() before accepting a known-zero register. This forces state equivalence to compare its scalar range and makes the verifier visit and reject a path carrying a nonzero value. | ||||
| CVE-2026-98035 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Cancel special fields when recycling rhtab elements rhtab_map_update_existing() and rhtab_delete_elem() call bpf_obj_free_fields() when replacing or deleting a value. These map operations can run from BPF programs in NMI context, where releasing a referenced kptr or another complex field is not generally safe. Array and hash maps avoid that problem by cancelling only the asynchronous fields which can be stopped safely in the caller context. Other ownership state remains attached to the allocation until its memory allocator destructor performs the final cleanup. Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to release referenced kptrs when the allocation is eventually destroyed. [ kkd: Rebased, used direct helper calls, and rewrote the commit log ] | ||||
| CVE-2026-100070 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addr() changes the packet length, such as when the public NAT IP string is shorter or longer than the internal IP, coff will still point to the offset relative to the pre-mangled packet. If the packet shrinks, coff could overshoot the correct position, potentially causing the next ct_sip_parse_header_uri() call to silently skip bytes and miss subsequent Contact headers. Could this lead to a failure to NAT those subsequent headers and leak internal network details? | ||||
| CVE-2026-98047 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check ancestor frames for rbtree callbacks bpf_rbtree_add() invokes its comparator while the caller holds the root lock. The native insertion code retains raw parent and link pointers across the callback, so the verifier prohibits unlocking, consuming tree nodes, or changing RCU state from that callback. in_rbtree_lock_required_cb() only checks the innermost verifier frame. Static subprogram calls are permitted while holding a spin lock, and such a call pushes a frame without in_callback_fn set. Consequently, all callback restrictions disappear in the nested frame. The subprogram can unlock the tree, remove and drop the node being compared, then relock. Native insertion resumes with the stale parent pointer and links freed memory into the tree. Walk all active frames for the rbtree callback instead. Benign static subprograms remain permitted, while callback restrictions follow execution into nested frames. | ||||
| CVE-2026-98048 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: don't rewrite bpf_fastcall patterns entered by a jump mark_fastcall_pattern_for_call() must ensure that matched "spill; call; fill" instruction series is not interrupted by a jump. Otherwise the rewrite applied by bpf_remove_fastcall_spills_fills() is not sound. Record the instructions targeted by jumps in insn_aux_data[*].jump_target when the CFG is built and use this flag to stop growing a pattern at such an instruction. Jumps to the first spill are fine. Note that existing insn_aux_data[*].jmp_point field can't be reused, as it marks subprogram return instructions. | ||||
| CVE-2026-98146 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain struct amdxdna_cmd_chain contains a flexible array annotated with __counted_by(command_count). Since the structure is stored in shared AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently. If command_count is changed to zero, the bounds check generated from __counted_by may fail and trigger a kernel panic. Remove __counted_by to avoid relying on the userspace-controlled command_count for the flexible array bounds check. | ||||