Export limit exceeded: 367878 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (367878 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-64045 1 Linux 1 Linux Kernel 2026-09-02 8.4 High
In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - use cached peer pointer in ovpn_tcp_close() ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data() under rcu_read_lock(), takes a reference on sock->peer, caches the peer pointer in a local, and drops the read lock. It then passes sock->peer (rather than the cached local) to ovpn_peer_del(), re-dereferencing the ovpn_socket after the RCU read section has ended. Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use after unlock" pattern but is protected by lock_sock() held across the function, ovpn_tcp_close() runs without the socket lock: inet_release() invokes sk_prot->close() without taking lock_sock first. ovpn_socket_release() can therefore complete its kref_put -> detach -> synchronize_rcu -> kfree(sock) sequence concurrently, in the window after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences sock->peer. The synchronize_rcu() in ovpn_socket_release() protects readers that use the dereferenced pointer inside the RCU read section, not those that escape the pointer to a local and use it afterwards. A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp - don't deref NULL sk_socket member after tcp_close()"): trigger a peer removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same moment userspace closes the TCP fd. That commit fixed the detach-side of the same race window; this one fixes the close-side at a different victim. Tighten the entry block to read sock->peer exactly once into the cached peer local, and route all subsequent uses (the hold check, the ovpn_peer_del() call, and the prot->close() invocation) through that local. sock->peer is only ever written once in ovpn_socket_new() under lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket, and is never reassigned afterwards - but the previous multi-read pattern made that invariant implicit rather than explicit. The same multi-read shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(), ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned up via a dedicated helper in a follow-up net-next series.
CVE-2026-64046 1 Linux 1 Linux Kernel 2026-09-02 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective.
CVE-2026-64049 1 Linux 1 Linux Kernel 2026-09-02 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: fix userspace-triggered crash on a2xx-a4xx Before a5xx Adreno driver will not try fetching UBWC params (because those generations didn't support UBWC anyway), however it's still possible to query UBWC-related params from the userspace, triggering possible NULL pointer dereference. Check for UBWC config in adreno_get_param() and return sane defaults if there is none. Patchwork: https://patchwork.freedesktop.org/patch/717778/
CVE-2026-64050 1 Linux 1 Linux Kernel 2026-09-02 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: don't mix devm and drmm functions Mixing devm and drmm functions will result in a use-after-free on msm driver teardown if userspace keeps a reference on the drm device: The WB connector data will be destroyed because of the use of devm_kzalloc()), while the usersoace still can try interacting with the WB connector (which uses drmm_ functions). Change dpu_writeback_init() to use drmm_. Patchwork: https://patchwork.freedesktop.org/patch/722656/
CVE-2026-64051 1 Linux 1 Linux Kernel 2026-09-02 7.8 High
In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Add overflow check to remap_pfn_range during mmap The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to (re)mapping beyond the VMA if the BO is too large. This can cause use after free issues when munmap() unmaps only the VMA region and not the additional mappings. To prevent this, check the remaining size of the VMA before remapping and truncate the remapped length if sg->length is too large. [jhugo: fix braces from checkpatch --strict]
CVE-2026-64052 1 Linux 1 Linux Kernel 2026-09-02 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user() pin_user_pages_fast() can partially succeed and return the number of pages that were actually pinned. However, the bio_integrity_map_user() does not handle this partial pinning. This leads to a general protection fault since bvec_from_pages() dereferences an unpinned page address, which is 0. To fix this, add a check to verify that all requested memory is pinned. If partial pinning occurs, unpin the memory and return -EFAULT. Kernel Oops: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6
CVE-2026-64053 1 Linux 1 Linux Kernel 2026-09-02 7.8 High
In the Linux kernel, the following vulnerability has been resolved: block: don't overwrite bip_vcnt in bio_integrity_copy_user() bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h read past the bip_vec[] flex array. On READ the read is in bounds but lands on a saved user bvec instead of the bounce. The line was added for split propagation, but bio_integrity_clone() doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER.
CVE-2026-84886 1 Simular-ai 1 Agent-s 2026-09-02 5.3 Medium
A vulnerability was determined in simular-ai Agent-S up to 0.3.2. Affected by this vulnerability is the function ImageData of the file gui_agents/s1/utils/ocr_server.py of the component OCR HTTP API. Executing a manipulation of the argument img_bytes can lead to resource consumption. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-81205 1 Drupal 1 Ldap / Active Directory Integration 2026-09-02 5.3 Medium
Improper Neutralization of Special Elements used in an LDAP Query ('LDAP Injection') vulnerability in Drupal LDAP / Active Directory Integration allows LDAP Injection. This issue affects LDAP / Active Directory Integration versions: from 0.0.0 to 2.2.1.
CVE-2026-59822 2 Berriai, Litellm 2 Litellm, Litellm 2026-09-02 8.2 High
LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. Prior to 1.84.0, LiteLLM's MCP Streamable HTTP endpoint allowed an unauthenticated attacker to use a fabricated Authorization header to trigger an OAuth2 passthrough fallback path that replaced failed LiteLLM key validation with an empty UserAPIKeyAuth() object, allowing requests to reach MCP tooling without a valid LiteLLM key. This issue is fixed in version 1.84.0.
CVE-2026-66376 1 Jfrog 1 Artifactory 2026-09-02 4.2 Medium
Credentials for a deleted user may remain valid for a short period under specific conditions.
CVE-2026-66377 1 Jfrog 1 Artifactory 2026-09-02 5.3 Medium
An unauthenticated user may access restricted repository information under specific conditions.
CVE-2026-66378 1 Jfrog 1 Artifactory 2026-09-02 4.3 Medium
An authenticated user without repository read permission may access private NuGet metadata under specific conditions.
CVE-2026-66379 1 Jfrog 1 Artifactory 2026-09-02 4.3 Medium
An authenticated user may view private Puppet module metadata without repository read access.
CVE-2026-66380 1 Jfrog 1 Artifactory 2026-09-02 4.3 Medium
An authenticated user without repository read permission may access private OCI referrer metadata under specific conditions.
CVE-2026-66381 1 Jfrog 1 Artifactory 2026-09-02 5.3 Medium
A repository reader with cache-deploy permission may access content outside a configured upstream path under specific conditions.
CVE-2026-66382 1 Jfrog 1 Artifactory 2026-09-02 4.3 Medium
An authenticated user may write files outside the intended Artifactory work directory under specific conditions.
CVE-2026-68760 1 Jfrog 1 Artifactory 2026-09-02 5.3 Medium
An unauthenticated user may bypass authentication under specific cache conditions.
CVE-2023-20577 2026-09-02 7.4 High
A heap overflow in SMM module may allow an attacker with access to a second vulnerability that enables writing to SPI flash, potentially resulting in arbitrary code execution.
CVE-2026-76221 1 Gitpython Project 1 Gitpython 2026-09-02 8.8 High
GitPython before 3.1.58 contains a config-name injection vulnerability in the option-name validator that allows attackers to forge arbitrary git-config directives by injecting equals signs, hash symbols, and whitespace into option names. Attackers can inject malicious option names like 'sshCommand = touch /tmp/RCE #' to execute arbitrary commands via core.sshCommand or core.hooksPath on the next git operation.