Export limit exceeded: 12703 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (12703 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31883 | 1 Freerdp | 1 Freerdp | 2026-03-24 | 6.5 Medium |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, a size_t underflow in the IMA-ADPCM and MS-ADPCM audio decoders leads to heap-buffer-overflow write via the RDPSND audio channel. In libfreerdp/codec/dsp.c, the IMA-ADPCM and MS-ADPCM decoders subtract block header sizes from a size_t variable without checking for underflow. When nBlockAlign (received from the server) is set such that size % block_size == 0 triggers the header parsing at a point where size is smaller than the header (4 or 8 bytes), the subtraction wraps size to ~SIZE_MAX. The while (size > 0) loop then continues for an astronomical number of iterations. This vulnerability is fixed in 3.24.0. | ||||
| CVE-2026-31884 | 1 Freerdp | 1 Freerdp | 2026-03-23 | 6.5 Medium |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, division by zero in MS-ADPCM and IMA-ADPCM decoders when nBlockAlign is 0, leading to a crash. In libfreerdp/codec/dsp.c, both ADPCM decoders use size % block_size where block_size = context->common.format.nBlockAlign. The nBlockAlign value comes from the Server Audio Formats PDU on the RDPSND channel. The value 0 is not validated anywhere before reaching the decoder. When nBlockAlign = 0, the modulo operation causes a SIGFPE (floating point exception) crash. This vulnerability is fixed in 3.24.0. | ||||
| CVE-2026-31885 | 1 Freerdp | 1 Freerdp | 2026-03-23 | 6.5 Medium |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, there is an out-of-bounds read in MS-ADPCM and IMA-ADPCM decoders due to unchecked predictor and step_index values from input data. This vulnerability is fixed in 3.24.0. | ||||
| CVE-2026-31806 | 1 Freerdp | 1 Freerdp | 2026-03-23 | 9.8 Critical |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, the gdi_surface_bits() function processes SURFACE_BITS_COMMAND messages sent by the RDP server. When the command is handled using NSCodec, the bmp.width and bmp.height values provided by the server are not properly validated against the actual desktop dimensions. A malicious RDP server can supply crafted bmp.width and bmp.height values that exceed the expected surface size. Because these values are used during bitmap decoding and memory operations without proper bounds checking, this can lead to a heap buffer overflow. Since the attacker can also control the associated pixel data transmitted by the server, the overflow may be exploitable to overwrite adjacent heap memory. This vulnerability is fixed in 3.24.0. | ||||
| CVE-2026-31897 | 1 Freerdp | 1 Freerdp | 2026-03-23 | 0 Low |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, there is an out-of-bounds read in freerdp_bitmap_decompress_planar when SrcSize is 0. The function dereferences *srcp (which points to pSrcData) without first verifying that SrcSize >= 1. When SrcSize is 0 and pSrcData is non-NULL, this reads one byte past the end of the source buffer. This vulnerability is fixed in 3.24.0. | ||||
| CVE-2026-32249 | 1 Vim | 1 Vim | 2026-03-23 | 5.3 Medium |
| Vim is an open source, command line text editor. From 9.1.0011 to before 9.2.0137, Vim's NFA regex compiler, when encountering a collection containing a combining character as the endpoint of a character range (e.g. [0-0\u05bb]), incorrectly emits the composing bytes of that character as separate NFA states. This corrupts the NFA postfix stack, resulting in NFA_START_COLL having a NULL out1 pointer. When nfa_max_width() subsequently traverses the compiled NFA to estimate match width for the look-behind assertion, it dereferences state->out1->out without a NULL check, causing a segmentation fault. This vulnerability is fixed in 9.2.0137. | ||||
| CVE-2023-53571 | 1 Linux | 1 Linux Kernel | 2026-03-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Make intel_get_crtc_new_encoder() less oopsy The point of the WARN was to print something, not oops straight up. Currently that is precisely what happens if we can't find the connector for the crtc in the atomic state. Get the dev pointer from the atomic state instead of the potentially NULL encoder to avoid that. (cherry picked from commit 3b6692357f70498f617ea1b31a0378070a0acf1c) | ||||
| CVE-2023-53566 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-03-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: fix null deref on element insertion There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem(): general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] nft_add_set_elem+0x14b0/0x2990 nf_tables_newsetelem+0x528/0xb30 Furthermore, there is a possible use-after-free while iterating, 'node' can be free'd so we need to cache the next value to use. | ||||
| CVE-2024-39317 | 1 Torchbox | 1 Wagtail | 2026-03-20 | 6.5 Medium |
| Wagtail is an open source content management system built on Django. A bug in Wagtail's `parse_query_string` would result in it taking a long time to process suitably crafted inputs. When used to parse sufficiently long strings of characters without a space, `parse_query_string` would take an unexpectedly large amount of time to process, resulting in a denial of service. In an initial Wagtail installation, the vulnerability can be exploited by any Wagtail admin user. It cannot be exploited by end users. If your Wagtail site has a custom search implementation which uses `parse_query_string`, it may be exploitable by other users (e.g. unauthenticated users). Patched versions have been released as Wagtail 5.2.6, 6.0.6 and 6.1.3. | ||||
| CVE-2025-49844 | 2 Lfprojects, Redis | 2 Valkey, Redis | 2026-03-20 | 10 Critical |
| Redis is an open source, in-memory database that persists on disk. Versions 8.2.1 and below allow an authenticated user to use a specially crafted Lua script to manipulate the garbage collector, trigger a use-after-free and potentially lead to remote code execution. The problem exists in all versions of Redis with Lua scripting. This issue is fixed in version 8.2.2. To workaround this issue without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands. | ||||
| CVE-2025-71220 | 1 Linux | 1 Linux Kernel | 2026-03-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: call ksmbd_session_rpc_close() on error path in create_smb2_pipe() When ksmbd_iov_pin_rsp() fails, we should call ksmbd_session_rpc_close(). | ||||
| CVE-2025-71222 | 1 Linux | 1 Linux Kernel | 2026-03-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: ensure skb headroom before skb_push This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is less than needed (typically 110 - 94 = 16 bytes). | ||||
| CVE-2025-71200 | 1 Linux | 1 Linux Kernel | 2026-03-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode When operating in HS200 or HS400 timing modes, reducing the clock frequency below 52MHz will lead to link broken as the Rockchip DWC MSHC controller requires maintaining a minimum clock of 52MHz in these modes. Add a check to prevent illegal clock reduction through debugfs: root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock root@debian:/# [ 30.090146] mmc0: running CQE recovery mmc0: cqhci: Failed to halt mmc0: cqhci: spurious TCN for tag 0 WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24 Modules linked in: CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT Hardware name: Rockchip RK3588 EVB1 V10 Board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : cqhci_irq+0x254/0x818 lr : cqhci_irq+0x254/0x818 ... | ||||
| CVE-2025-66564 | 2 Linuxfoundation, Sigstore | 2 Sigstore Timestamp Authority, Timestamp Authority | 2026-03-17 | 7.5 High |
| Sigstore Timestamp Authority is a service for issuing RFC 3161 timestamps. Prior to 2.0.3, Function api.ParseJSONRequest currently splits (via a call to strings.Split) an optionally-provided OID (which is untrusted data) on periods. Similarly, function api.getContentType splits the Content-Type header (which is also untrusted data) on an application string. As a result, in the face of a malicious request with either an excessively long OID in the payload containing many period characters or a malformed Content-Type header, a call to api.ParseJSONRequest or api.getContentType incurs allocations of O(n) bytes (where n stands for the length of the function's argument). This vulnerability is fixed in 2.0.3. | ||||
| CVE-2025-66562 | 2 Ai-ql, Aiql | 2 Tuui, Tuui | 2026-03-17 | 9.6 Critical |
| TUUI is a desktop MCP client designed as a tool unitary utility integration. Prior to 1.3.4, a critical Remote Code Execution (RCE) vulnerability exists in Tuui due to an unsafe Cross-Site Scripting (XSS) flaw in the Markdown rendering component. Tuui allows the execution of arbitrary JavaScript within ECharts code blocks. Combined with an exposed IPC interface that allows spawning processes, an attacker can execute arbitrary system commands on the victim's machine simply by having them view a malicious Markdown message. This vulnerability is fixed in 1.3.4. | ||||
| CVE-2024-47539 | 2 Gstreamer, Redhat | 6 Gstreamer, Enterprise Linux, Rhel Aus and 3 more | 2026-03-17 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An out-of-bounds write vulnerability was identified in the convert_to_s334_1a function in isomp4/qtdemux.c. The vulnerability arises due to a discrepancy between the size of memory allocated to the storage array and the loop condition i * 2 < ccpair_size. Specifically, when ccpair_size is even, the allocated size in storage does not match the loop's expected bounds, resulting in an out-of-bounds write. This bug allows for the overwriting of up to 3 bytes beyond the allocated bounds of the storage array. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2023-37329 | 1 Gstreamer | 1 Gstreamer | 2026-03-17 | 8.8 High |
| GStreamer SRT File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of SRT subtitle files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20968. | ||||
| CVE-2023-40474 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer MXF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of MXF video files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-21660. | ||||
| CVE-2023-40475 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer MXF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of MXF video files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-21661. | ||||
| CVE-2023-40476 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer H265 Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of H265 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-21768. | ||||