Export limit exceeded: 366692 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (366692 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80613 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: veth: fix NAPI leak in XDP enable error path During XDP enablement in veth, if xdp_rxq_info_reg() or xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes. However, the rollback loop: for (i--; i >= start; i--) { decrements the loop index 'i' before the first iteration. This correctly skips unregistering the rxq for the failed index 'i' (as registration failed or was already cleaned up), but it also erroneously skips calling netif_napi_deli() for rq[i].xdp_napi. Since netif_napi_add() was already called for index 'i', this leaves a dangling napi_struct in the device's napi_list. When the veth device is later destroyed, the freed queue memory (which contains the leaked NAPI structure) can be reused. The subsequent device teardown iterates the NAPI list and corrupts the reallocated memory, leading to UAF. Fix this by explicitly deleting the NAPI association for the failed index 'i' before rolling back the successfully configured queues. | ||||
| CVE-2026-80614 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: emac: Fix NULL pointer dereference in emac_probe Move devm_request_irq() after devm_platform_ioremap_resource() so that dev->emacp is mapped before the interrupt handler can fire. An early interrupt hitting emac_irq() would dereference the NULL dev->emacp and crash. Also remove redundant error message. devm_platform_ioremap_resource() already returns an error message with dev_err_probe(). | ||||
| CVE-2026-80684 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix NULL dereference on AIBV allocation failure The airq_iv_create() can return NULL on failure, but the return value was never checked. If it fails, zdev->aibv will be NULL and fail when dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the previously allocated AISB bit and zdev->aisb on failure. | ||||
| CVE-2026-82364 | 1 Macrozheng | 1 Mall | 2026-08-29 | 4.2 Medium |
| A security vulnerability has been detected in macrozheng mall up to 1.0.3. This impacts an unknown function of the file /order/submit of the component Order Submission. The manipulation leads to race condition. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The vendor deleted the GitHub issue for this vulnerability without and explanation. | ||||
| CVE-2026-80693 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: idpf: bound interrupt-vector register fill to the allocated array idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding its inner loop only by the per-chunk num_vectors. The array is sized separately: idpf_intr_reg_init() allocates kzalloc_objs(struct idpf_vec_regs, total_vecs) from caps.num_allocated_vectors and only checks the returned count after the fill. The sum of per-chunk num_vectors is never reconciled against total_vecs, so a reply with a small num_allocated_vectors but chunks summing higher writes past the end of reg_vals[]. Impact: a control plane (a PF or hypervisor device model) that returns a VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds num_allocated_vectors writes struct idpf_vec_regs entries past the end of the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write). Bound the fill loop to the array capacity passed in by the callers, mirroring the sibling idpf_vport_get_q_reg(). The existing num_regs < num_vecs check then rejects an undersized reply without the out-of-bounds write happening first. | ||||
| CVE-2026-80706 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: softing: fw_parse(): validate firmware record spans fw_parse() reads a fixed record header, a firmware-provided payload, and a trailing checksum without knowing the end of the firmware blob. A truncated record can therefore make those reads exceed the blob. The same record also supplies addresses and lengths for writes into DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its bounds check, while the application loader does not bound the staging copy at all. Pass the firmware end to the parser and validate the full source record. Use a signed wide offset for generic DPRAM records and validate the application staging span against the mapped DPRAM before copying. | ||||
| CVE-2026-80712 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: write the feature value before executing SET_FEATURE qcom_spi_send_cmdaddr() programs NAND_FLASH_CMD/NAND_EXEC_CMD and submits the descriptors, which makes the controller execute the command immediately. For SPINAND_SET_FEATURE the value to be written is only placed into NAND_FLASH_FEATURES afterwards, by qcom_spi_io_op(), in a second submission - so the chip is programmed with whatever that register happened to hold from a previous operation, and the intended value is only applied by the *next* SET_FEATURE. Measured on a TP-Link Archer AX55 v1 (IPQ5018, ESMT F50L1G41LB): writing 0x40 to the configuration register (0xb0) leaves the chip at 0x00, and the subsequent write of 0x00 leaves it at 0x40 - every write lands one operation late. This stayed unnoticed until v6.18 added SPI-NAND OTP support together with OTP entries for ESMT chips. spinand_otp_rw() enables OTP mode, reads, and disables it again, and mtd_otp_nvmem_add() does this during MTD registration. With the off-by-one, the "disable" write actually applies the previously requested value, so CFG_OTP_ENABLE ends up set: the chip stays in OTP mode, every subsequent array read returns the OTP area instead of the array (UBI reports an empty device) and all writes fail with -EIO because the OTP area is write protected. On this board that makes the whole flash unusable and the device unbootable. Write the feature value into NAND_FLASH_FEATURES as part of the same transaction, before NAND_EXEC_CMD. While at it, copy only the bytes the operation actually carries - the previous code dereferenced a 4-byte pointer on a one-byte buffer (spinand->scratchbuf). With this patch the flash contents read back bit-identical to a known-good dump of the same board taken under the vendor firmware (md5-verified across partitions), and writes work. | ||||
| CVE-2026-80609 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: qede: fix out-of-bounds check for cqe->len_list[] Move index check before element access. | ||||
| CVE-2026-80622 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: char: tlclk: fix use-after-free in tlclk_cleanup() This patch improves the module cleanup process in the tlclk driver to prevent potential use-after-free and race conditions. Currently, the file_operations structure does not specify the .owner field, which could allow the module to be unloaded while user-space processes are still interacting with the device. Additionally, the tlclk_cleanup() function frees the alarm_events memory before ensuring that blocked processes in the waitqueue are fully awakened and that the switchover_timer has completed. To address these cases, this patch: - Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module unloading while the device is in use. - Updates tlclk_cleanup() to explicitly wake up all blocked readers (wake_up_all), properly release hardware I/O regions, and safely delete the timer (timer_delete_sync) prior to freeing memory. | ||||
| CVE-2026-80646 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: guard against possible NULL deref in __in6_dev_stats_get() dev_get_by_index_rcu() could return NULL if the original physical device is unregistered. Found by Sashiko. | ||||
| CVE-2026-80656 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: Add a sanity check for btree node size Syzbot reported an uninit-value bug in [1] with a corrupted HFS+ image, during the file system mounting process, specifically while loading the catalog, a corrupted node_size value of 1 caused the rec_off argument passed to hfs_bnode_read_u16() (within hfs_bnode_find()) to be excessively large. Consequently, the function failed to return a valid value to initialize the off variable, triggering the bug [1]. Every node starts from BTree node descriptor: struct hfs_bnode_desc. So, the size of node cannot be lesser than that. However, technical specification declares that: "The node size (which is expressed in bytes) must be power of two, from 512 through 32,768, inclusive." Add a check for btree node size base on technical specification. [1] BUG: KMSAN: uninit-value in hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584 hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584 hfsplus_btree_open+0x169a/0x1e40 fs/hfsplus/btree.c:382 hfsplus_fill_super+0x111f/0x2770 fs/hfsplus/super.c:553 get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694 get_tree_bdev+0x38/0x50 fs/super.c:1717 hfsplus_get_tree+0x35/0x40 fs/hfsplus/super.c:709 vfs_get_tree+0xb3/0x5d0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] | ||||
| CVE-2026-80665 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Inject SEA if kvm_translate_vncr() can't resolve PFN kvm_handle_vncr_abort() assumes that s1_walk_result conveys an abort when kvm_translate_vncr() returns -EFAULT. This is not always the case as it's possible to encounter 'late' failures on the output of S1 translation, e.g. a GFN outside of the memslots. Fix it by preparing an external abort before returning from kvm_translate_vncr(). Get rid of the BUG_ON() in the fault injection path while at it. | ||||
| CVE-2026-80696 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Fix reading the minimum alarm voltage Coverity reports an out-of-bounds access when reading the minimum alarm voltage for the VGPIO channel. Add the missing return statement to fix the problem. | ||||
| CVE-2026-80606 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/userptr: Hold notifier_lock for write on inject test path When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit() runs vma_check_userptr() with the svm notifier_lock taken for read. The test injection causes vma_check_userptr() to call xe_vma_userptr_force_invalidate(), which feeds into xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That flag tells drm_gpusvm_unmap_pages() the caller already holds notifier_lock for write and only asserts the mode. Because the caller actually holds it for read, the assertion fires: WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \ drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper] Call Trace: xe_vma_userptr_do_inval+0x40d/0xfd0 [xe] xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe] xe_vma_userptr_force_invalidate+0xde/0x290 [xe] vma_check_userptr.constprop.0+0x1c6/0x220 [xe] xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe] ... xe_vm_bind_ioctl+0x3a0a/0x4480 [xe] Acquire notifier_lock for write in pre-commit when the inject Kconfig is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock(). Rename xe_svm_assert_held_read() to xe_svm_assert_held_read_or_inject_write() so it asserts the correct mode under each build configuration. Production builds (CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode behavior bit-for-bit. (cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365) | ||||
| CVE-2026-80634 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the decrement still happens and wraps it to 255. The break only leaves the inner switch -- a later path entry can set info->indev back to a real device, and we end up returning with num_encaps == 255. nft_dev_forward_path() then walks info.encap[] (size 2) up to num_encaps, which means an OOB stack read and a bogus count copied into the route descriptor. Should only happen on a malformed bridge path stack, hence the WARN, but worth handling sanely. Move the decrement out of the WARN. [ While at this, remove the WARN_ON_ONCE since this can only happen with a buggy bridge path stack --pablo ]. | ||||
| CVE-2026-80637 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unaligned_be32() and put_unaligned_be32() to safely read and write the timestamp fields. This prevents performance degradation due to unaligned memory access or even a crash on strict alignment architectures. This follows the implementation of timestamp parsing in the networking stack at tcp_parse_options() and synproxy_parse_options(). | ||||
| CVE-2026-80653 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add slave_destroy interface for v3 hw WARNING is triggered when executing link reset of remote PHY and rmmod SAS driver simultaneously. Following is the WARNING log: WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0 Call trace: __device_links_no_driver+0xb4/0xc0 device_links_driver_cleanup+0xb0/0xfc __device_release_driver+0x198/0x23c device_release_driver+0x38/0x50 bus_remove_device+0x130/0x140 device_del+0x184/0x434 __scsi_remove_device+0x118/0x150 scsi_remove_target+0x1bc/0x240 sas_rphy_remove+0x90/0x94 sas_rphy_delete+0x24/0x3c sas_destruct_devices+0x64/0xa0 [libsas] sas_revalidate_domain+0xe4/0x150 [libsas] process_one_work+0x1e0/0x46c worker_thread+0x15c/0x464 kthread+0x160/0x170 ret_from_fork+0x10/0x20 ---[ end trace 71e059eb58f85d4a ]--- During SAS phy up, link->status is set to DL_STATE_AVAILABLE in device_links_driver_bound, then this setting influences __device_links_no_driver() before driver rmmod and caused WARNING. Add the slave_destroy interface to make sure link is removed after flush workque. | ||||
| CVE-2026-80675 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: libbpf: Reject non-exclusive metadata maps in the signed loader The loader verifies map->sha against the metadata hash in its instructions. map->sha is calculated when BPF_OBJ_GET_INFO_BY_FD is called on the frozen map. While the map is frozen, the /signed loader/ must also ensure the map is exclusive, as, without exclusivity (which a hostile host could just omit when loading the loader), another BPF program with map access can mutate the contents afterwards, so the check passes on stale data. With the extra check as part of the signed loader, it now refuses to move on with map->sha validation if the host set it up wrongly. | ||||
| CVE-2026-80680 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: amd-mp2: Unregister callback on adapter add failure amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI driver's callback table before the adapter is registered. If i2c_add_adapter() fails, probe returns and devres frees the context, but the PCI driver can still dereference the stale pointer from its IRQ and system-sleep callbacks. Unregister the callback before returning the adapter registration error. | ||||
| CVE-2026-80709 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs There is a wrong upper limit check for the domain value when an EP11 CPRB is processed for sending to a crypto card. This check is only active on custom device nodes but may lead to access heap memory behind perms->adm when an administrative CPRB is sent. Add correct limit (AP_DOMAINS = 256) checking to fix this. | ||||