Export limit exceeded: 29238 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (29238 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63913 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check An unintended behavior in the TCP conntrack state machine allows a connection to be forced into the CLOSE state using an RST packet with an invalid sequence number. Specifically, after a SYN packet is observed, an RST with an invalid SEQ can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of whether the RST corresponds to the expected reply direction. The relevant code path assumes the RST is a response to an outgoing SYN, but does not validate packet direction or ensure that a matching SYN was actually sent in the opposite direction. As a result, a crafted packet sequence consisting of a SYN followed by an invalid-sequence RST can prematurely terminate an active NAT entry. This makes connection teardown easier than intended. So, tighten the state transition logic to ensure that RST-triggered CLOSE transitions only occur when the RST is a valid response to a previously observed SYN in the correct direction. | ||||
| CVE-2026-63894 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: serialize DMABUF cancel against request completion ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the completed request but leaves priv->req, the back-pointer that ffs_dmabuf_transfer() set on submission, pointing at the freed memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or ffs_epfile_release() on the close path still sees priv->req non-NULL under ffs->eps_lock: if (priv->ep && priv->req) usb_ep_dequeue(priv->ep, priv->req); so usb_ep_dequeue() is called on a freed usb_request. On dummy_hcd the dequeue path only walks a live queue and pointer-compares, so the freed pointer reads without faulting and KASAN requires an explicit check at the FunctionFS call site to surface the use-after-free. On SG-capable in-tree UDCs the dequeue path dereferences the supplied request immediately: * chipidea's ep_dequeue() does container_of(req, struct ci_hw_req, req) and reads hwreq->req.status before acquiring its own lock. * cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first. The narrower option of clearing priv->req via cmpxchg() in the completion does not close the race: the completion runs without eps_lock, so a cancel path holding eps_lock can still observe priv->req non-NULL, race a concurrent completion that clears and frees, and pass the freed pointer to usb_ep_dequeue(). A slightly longer fix that moves the free into the cleanup work is needed. Same class of lifetime race as the recent usbip-vudc timer fix [1]. Take eps_lock in the sole place that mutates priv->req from the callback direction by moving usb_ep_free_request() out of the completion into ffs_dmabuf_cleanup(), the existing work handler scheduled by ffs_dmabuf_signal_done() on ffs->io_completion_wq. Clear priv->req there under eps_lock before freeing, and only clear if priv->req still names our request (a subsequent ffs_dmabuf_transfer() on the same attachment may have queued a new one). This keeps the existing dummy_hcd sync-dequeue invariant: the completion callback is still invoked by the UDC without eps_lock held (dummy_hcd drops its own lock before calling the callback), and the callback now takes no f_fs lock at all. Serialization against the cancel path happens in cleanup, which runs from the workqueue with no f_fs lock held on entry. The priv ref count protects the containing ffs_dmabuf_priv: ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup drops it via ffs_dmabuf_put(), so priv stays live for the cleanup even after the cancel path's list_del + ffs_dmabuf_put. The ffs_dmabuf_transfer() error path no longer frees usb_req inline: fence->req and fence->ep are set before usb_ep_queue(), so ffs_dmabuf_cleanup() (scheduled by the error-path ffs_dmabuf_signal_done()) owns the free regardless of whether the queue succeeded. Reproduced under KASAN on both detach and close paths against dummy_hcd with an observability hook (kasan_check_byte(priv->req) immediately before usb_ep_dequeue) at the two FunctionFS cancel sites to surface the stale-pointer access; the hook is not part of this patch. The KASAN allocator / free stacks in the captured splats identify the same request: alloc in dummy_alloc_request, free in dummy_timer, fault reached from ffs_epfile_release (close) and from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the patch applied, both paths are silent under the same hook. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace or from a USB host on the cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the filesystem supports uid=, gid=, and fmode= delegation to a non-root gadget daemon, so on real deployments the attacker may be a less-privileged service rather than root. | ||||
| CVE-2026-63881 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger get_queue_ids() computes array_size = num_queues * sizeof(uint32_t), which could overflow on 32-bit size_t build. using array_size() instead, it saturates to SIZE_MAX on overflow. (cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285) | ||||
| CVE-2026-55874 | 1 Seaweedfs | 1 Seaweedfs | 2026-07-21 | 7.7 High |
| SeaweedFS is a distributed storage system. Prior to 4.34, the S3 API gateway does not reject dot-dot path segments in the X-Amz-Copy-Source header used by CopyObject and UploadPartCopy, allowing an authenticated identity scoped to one bucket to read objects from other buckets through server-side copy. This issue is fixed in version 4.34. | ||||
| CVE-2026-59877 | 1 Protobuf | 1 Protobuf | 2026-07-21 | 5.3 Medium |
| protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 7.6.5 and 8.6.6, protobufjs parsed option names by advancing through schema tokens until reaching an = token without checking for end of input, so a crafted .proto schema that opens an option declaration and ends prematurely can cause parse, Root.load, or Root.loadSync to loop indefinitely. This issue is fixed in versions 7.6.5 and 8.6.6. | ||||
| CVE-2026-63858 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: add hook transactions for device deletions Restore the flag that indicates that the hook is going away, ie. NFT_HOOK_REMOVE, but add a new transaction object to track deletion of hooks without altering the basechain/flowtable hook_list during the preparation phase. The existing approach that moves the hook from the basechain/flowtable hook_list to transaction hook_list breaks netlink dump path readers of this RCU-protected list. It should be possible use an array for nft_trans_hook to store the deleted hooks to compact the representation but I am not expecting many hook object, specially now that wildcard support for devices is in place. Note that the nft_trans_chain_hooks() list contains a list of struct nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE. Note that new commands can be updated to use nft_trans_hook for consistency. This patch also adapts the event notification path to deal with the list of hook transactions. | ||||
| CVE-2026-63863 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Fix unbalanced unlock in drm_gpusvm_scan_mm() There is a unbalanced lock/unlock to gpusvm notifier lock: [ 931.045868] ===================================== [ 931.046509] WARNING: bad unlock balance detected! [ 931.047149] 6.19.0-rc6+xe-**************** #9 Tainted: G U [ 931.048150] ------------------------------------- [ 931.048790] kworker/u5:0/51 is trying to release lock (&gpusvm->notifier_lock) at: [ 931.049801] [<ffffffffa090c0d8>] drm_gpusvm_scan_mm+0x188/0x460 [drm_gpusvm_helper] [ 931.050802] but there are no more locks to release! [ 931.051463] The drm_gpusvm_notifier_unlock() sits under err_free label and the first jump to err_free is just before calling the drm_gpusvm_notifier_lock() causing unbalanced unlock. | ||||
| CVE-2026-12970 | 2 Learnpress, Wordpress | 2 Learnpress, Wordpress | 2026-07-21 | 7.1 High |
| The LearnPress WordPress plugin before 4.4.1 does not escape a search parameter before reflecting it into an HTML attribute, leading to Reflected Cross-Site Scripting that executes in the browser of a logged-in instructor or administrator who is tricked into opening a crafted link. | ||||
| CVE-2026-49208 | 1 Symfony | 1 Ux | 2026-07-21 | N/A |
| Symfony UX is a JavaScript ecosystem for Symfony. From 2.8.0 until 2.36.0 and 3.1.0, when a #[LiveProp] is typed as DateTimeInterface and no explicit format is configured, Symfony\UX\LiveComponent\LiveComponentHydrator::hydrateObjectValue() falls back to new $className($value), allowing client-supplied relative strings such as now, tomorrow, or +10 years to move a writable, format-less date prop past time-based business logic checks. This issue is fixed in versions 2.36.0 and 3.1.0. | ||||
| CVE-2026-16014 | 1 Code-projects | 1 Hospital Bed Management System | 2026-07-21 | 7.3 High |
| A vulnerability was found in code-projects Hospital Bed Management System 1.0. This affects an unknown part of the component Login Form. Performing a manipulation of the argument Username results in sql injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. | ||||
| CVE-2026-2445 | 1 Wso2 | 6 Api Control Plane, Api Manager, Identity Server and 3 more | 2026-07-21 | 6.1 Medium |
| The affected product accepts user-supplied input within a URL parameter without enforcing expected sanitization or encoding before rendering it within the response. This condition allows for the injection of malicious JavaScript payloads. An attacker can leverage this vulnerability to cause the user's browser to redirect to a malicious website, modify the user interface of the webpage, or retrieve sensitive information from the browser. However, the impact is mitigated for session hijacking as all session-related sensitive cookies are protected by the httpOnly flag. | ||||
| CVE-2026-54910 | 1 Gtsteffaniak | 1 Filebrowser | 2026-07-21 | 7.7 High |
| FileBrowser Quantum is a free, self-hosted, web-based file manager. Prior to version 1.4.3-beta, the `subtitlesHandler` endpoint (`GET /api/media/subtitles`) accepts two user-controlled query parameters: `path` and `name`, both of which are used in filesystem operations without sanitization, creating two independent path traversal vectors. The primary vector is the `path` parameter: it is passed directly to `idx.GetRealPath()` without calling `SanitizeUserPath()`, allowing an attacker to escape the storage root and set `parentDir` to any directory on the host. No existing anchor file is required. The secondary vector is the `name` parameter: it is joined with `parentDir` via `filepath.Join(parentDir, name)` without stripping directory components, allowing traversal relative to any resolved `parentDir`. Any authenticated user (regardless of role or permissions) can exploit either vector to read any text file readable by the server process, including `/etc/passwd`, SSH keys, database credentials, and JWT signing keys. Version 1.4.3-beta patches the issue. | ||||
| CVE-2026-58484 | 1 Jovancoding | 1 Network-ai | 2026-07-21 | 7.1 High |
| Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `EnvironmentManager.listBackups()` reads each backup's `_manifest.json` and trusts the manifest's `path` field. `EnvironmentManager.pruneBackups()` later passes that trusted `entry.path` directly to `rmSync(entry.path, { recursive: true, force: true })`. An attacker who can place or modify a manifest inside `data/<env>/.backups/<name>/_manifest.json` can cause `network-ai env backup prune --env <env> --keep <n>` or any code path invoking `pruneBackups()` to recursively delete an arbitrary path accessible to the Network-AI process user. This is fixed in v5.12.2. `pruneBackups()` no longer passes `entry.path` from the on-disk manifest to `rmSync`. The deletion path is recomputed from a format-validated `entry.backupId`, and a `dirname` containment check confines deletion to exactly one level under the backups directory. A poisoned manifest (e.g. `"path": "/"`) is now inert. | ||||
| CVE-2026-45713 | 1 Axllent | 1 Mailpit | 2026-07-20 | 7.5 High |
| Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. Version 1.30.0 contains a patch. | ||||
| CVE-2026-35591 | 1 Libvips | 1 Libvips | 2026-07-20 | N/A |
| libvips is a fast image processing library with low memory needs. The `tiffload` operation in libvips versions before and including 8.18.1 could incorrectly determine the number of channels in a JPEG or JPEG2000-encoded tile within a TIFF image, leading to a possible buffer overflow. This has been patched in version 8.18.2. | ||||
| CVE-2026-44230 | 1 Bestpractical | 1 Rt | 2026-07-20 | 6.1 Medium |
| RT is an open source, enterprise-grade issue and ticket tracking system. Versions 5.0.4 up to (but not including) 5.0.10, and 6.0.0 up to (but not including) 6.0.3 contain a reflected Cross-Site Scripting (XSS) vulnerability where an attacker who can induce an authenticated RT user to visit a crafted URL can execute arbitrary JavaScript in that user's browser session. This issue has been fixed in versions 5.0.10 and 6.0.3. | ||||
| CVE-2026-55057 | 1 Microsoft | 8 365 Apps, Office 2016, Office 2019 and 5 more | 2026-07-20 | 5.5 Medium |
| Integer overflow or wraparound in Microsoft Office allows an unauthorized attacker to disclose information locally. | ||||
| CVE-2026-48812 | 1 Freescout Helpdesk | 1 Freescout | 2026-07-20 | 7.5 High |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.221, FreeScout's attachment download route skips token authentication for any attachment whose `token_type` is set to `1` (`TOKEN_TYPE_LEGACY`). Because this route is unauthenticated and the file path is deterministic, an unauthenticated remote attacker can download any attachment that was created by an older version of FreeScout without possessing a valid token or session. Version 1.8.221 contains a fix. | ||||
| CVE-2026-63768 | 1 Calcom | 1 Cal.diy | 2026-07-20 | 4.3 Medium |
| cal.diy through 6.2.0 contains an open redirect vulnerability in the conferencing OAuth callback endpoint that allows attackers to redirect users to arbitrary URLs by crafting malicious state parameters. Attackers can exploit the unsigned state parameter and onErrorReturnTo field to silently redirect visitors from the trusted domain to attacker-controlled URLs for phishing attacks. | ||||
| CVE-2026-33327 | 1 Libvips | 1 Libvips | 2026-07-20 | N/A |
| libvips is a fast image processing library with low memory needs. The `vipsload` operation in versions before and including 8.18.0 could incorrectly determine image dimensions leading to an integer overflow and a subsequent heap-based buffer overflow. This has been patched in version 8.18.1. | ||||