Export limit exceeded: 29294 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (29294 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64052 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user() pin_user_pages_fast() can partially succeed and return the number of pages that were actually pinned. However, the bio_integrity_map_user() does not handle this partial pinning. This leads to a general protection fault since bvec_from_pages() dereferences an unpinned page address, which is 0. To fix this, add a check to verify that all requested memory is pinned. If partial pinning occurs, unpin the memory and return -EFAULT. Kernel Oops: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6 | ||||
| CVE-2026-63990 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c. | ||||
| CVE-2026-63859 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Add missing bits in airoha_qdma_cleanup_tx_queue() Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to TX_CPU_IDX to notify the NIC the QDMA TX ring is empty. | ||||
| CVE-2026-63839 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int() lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found by sashiko.dev [1]). Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)' block so that it is always freed by the __free cleanup callback. No functional change intended. | ||||
| CVE-2026-63838 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: rsnd: Fix potential out-of-bounds access of component_dais[] component_dais[RSND_MAX_COMPONENT] is initially zero-initialized and later populated in rsnd_dai_of_node(). However, the existing boundary check: if (i >= RSND_MAX_COMPONENT) does not guarantee that the last valid element remains zero. As a result, the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero, which may lead to an out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-63836 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics. ((mss * 8) ** 2) / (cwnd * 8) In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around and be 0 - resulting in: ((mss * 8) ** 2) / 0 This is of course invalid and cannot be calculated. The calculation should must be simplified to avoid this overflow: (mss ** 2) * 8 / cwnd It will keep the precision enhancement from the scaling (by 8) but avoid the overflow in the divisor. In theory, there could still be an overflow in the dividend. It is at the moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an imminent problem. But allowing it to use the whole u32 bit range, would mean that it can still use up to 67 bits. To keep this calculation safe for 32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits - or in other words: must never be larger than 16383. | ||||
| CVE-2026-63835 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: prevent OGM aggregation on disabled hardif When an interface gets disabled, the worker is correctly disabled by batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable(). In this process, the skb aggr_list is also freed. But batadv_v_ogm_send_meshif() can still queue new skbs (via batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all cores can no longer find the RCU protected list of hard interfaces. These queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work. The batadv_v_ogm_iface_disable() function must block batadv_v_ogm_queue_on_if() to avoid leak of skbs. | ||||
| CVE-2026-63834 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: restrict number of unacked list entries When the unacked_list is unbound, an attacker could send messages with small lengths and appropriated seqno + gaps to force the receiver to allocate more and more unacked_list entries. And the end either causing an out-of-memory situation or increase the management overhead for the (large) list that significant portions of CPU cycles are wasted in searching through the list. When limiting the list to a specific number, it is important to still correctly add a new entry to the list. But if the list became larger than the limit, the last entry of the list (with the highest seqno) must be dropped to still allow the earlier seqnos to finish and therefore to continue the process. Otherwise, the process might get stuck with too high seqnos which are not handled by batadv_tp_ack_unordered(). | ||||
| CVE-2026-63822 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath11k_pci), and we get: WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90 Call Trace: free_large_kmalloc ath11k_dp_free ath11k_core_deinit ath11k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. | ||||
| CVE-2026-63798 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe and sets up chained handlers using irq_set_chained_handler_and_data(). However, on driver removal, the generic chips are not freed and the chained handlers are not removed. The generic chips remain on the global gc_list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, potentially resulting in a use-after-free and kernel crash. The chained handlers that were installed in probe for peripheral and syswake interrupts are also left dangling, which can lead to spurious interrupts accessing freed memory. Fix these issues by: - Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the core code automatically removes generic chips when irq_domain_remove() is called - Clearing all chained handlers with NULL in pdc_intc_remove() | ||||
| CVE-2026-63794 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path In sev_dbg_crypt(), the per-iteration transfer length is bounded by the source page offset (PAGE_SIZE - s_off) but not by the destination page offset (PAGE_SIZE - d_off). When d_off > s_off, the encrypt path (__sev_dbg_encrypt_user) performs a read-modify-write using a single-page intermediate buffer (dst_tpage): 1. __sev_dbg_decrypt() expands the size to round_up(len + (d_off & 15), 16) before issuing the PSP command. If len + (d_off & 15) > PAGE_SIZE, the PSP writes beyond the end of the 4096-byte dst_tpage allocation. 2. The subsequent memcpy()/copy_from_user() into page_address(dst_tpage) + (d_off & 15) of 'len' bytes overflows by up to 15 bytes under the same condition. Trigger example: s_off = 0, d_off = 1, debug.len = PAGE_SIZE - the PSP is instructed to write round_up(4097, 16) = 4112 bytes to a 4096-byte buffer. Fix by also bounding len by (PAGE_SIZE - d_off), the same check that sev_send_update_data() already performs for its single-page guest region. ================================================================== BUG: KASAN: slab-use-after-free in sev_dbg_crypt+0x993/0xd10 [kvm_amd] Write of size 4095 at addr ff110062293bb009 by task sev_dbg_test/228214 CPU: 96 UID: 0 PID: 228214 Comm: sev_dbg_test Tainted: G U W 7.0.0-smp--5ce9b0c48211-dbg #156 PREEMPTLAZY Tainted: [U]=USER, [W]=WARN Hardware name: Google Astoria/astoria, BIOS 0.20250817.1-0 08/25/2025 Call Trace: <TASK> dump_stack_lvl+0x54/0x70 print_report+0xbc/0x260 kasan_report+0xa2/0xd0 kasan_check_range+0x25f/0x2c0 __asan_memcpy+0x40/0x70 sev_dbg_crypt+0x993/0xd10 [kvm_amd] sev_mem_enc_ioctl+0x33c/0x450 [kvm_amd] kvm_vm_ioctl+0x65d/0x6d0 [kvm] __se_sys_ioctl+0xb2/0x100 do_syscall_64+0xe8/0x870 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7fe72b6a0 pfn:0x62293bb memcg:ff11000112827d82 flags: 0x1400000000000000(node=1|zone=1) raw: 1400000000000000 0000000000000000 dead000000000122 0000000000000000 raw: 00000007fe72b6a0 0000000000000000 00000001ffffffff ff11000112827d82 page dumped because: kasan: bad access detected Memory state around the buggy address: ff110062293bbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff110062293bbf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ff110062293bc000: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ff110062293bc080: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ff110062293bc100: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint [sean: add sample KASAN splat, Fixes, and stable@] | ||||
| CVE-2026-53385 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write A KASAN null-ptr-deref was observed in vcs_notifier(): BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130 Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {} The issue is a race condition in vcs_write(). When the console_lock is temporarily dropped (to copy data from userspace), the vc_data pointer obtained from vcs_vc() may become stale. After re-acquiring the lock, vcs_vc() is called again to re-validate the pointer. If the vc has been deallocated in the meantime, vcs_vc() returns NULL, and the while loop breaks (with written > 0). However, after the loop, vcs_scr_updated(vc) is still called with the now-NULL vc pointer, leading to a null pointer dereference in the notifier chain (vcs_notifier dereferences param->vc). Fix this by adding a NULL check for vc before calling vcs_scr_updated(). | ||||
| CVE-2026-53382 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si syzbot reported a general protection fault in vidtv_psi_ts_psi_write_into [1]. vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does not check for this before dereferencing the returned pointer to access the continuity counter. This leads to a general protection fault when accessing a near-NULL address. The root cause is that vidtv_mux_pid_ctx_init() does not check the return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs. If the allocation fails, the PID context is never created, but init returns success. The subsequent vidtv_mux_push_si() call then gets NULL from vidtv_mux_get_pid_ctx() and crashes. Fix both the root cause (add error check in vidtv_mux_pid_ctx_init for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for all vidtv_mux_get_pid_ctx() calls. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events vidtv_mux_tick RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197 Call Trace: <TASK> vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline] vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231 vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196 vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408 | ||||
| CVE-2026-30796 | 6 Apple, Linux, Microsoft and 3 more | 6 Macos, Linux Kernel, Windows and 3 more | 2026-07-19 | 7.5 High |
| Cleartext Transmission of Sensitive Information, Insufficiently Protected Credentials vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Address book sync, Heartbeat sync loop modules) allows Sniffing Attacks. The client places the preset address-book password verbatim into the heartbeat sync JSON body (src/hbbs_http/sync.rs). Over an intact HTTPS session it is not exposed in transit, but it is a reusable shared secret rather than a zero-knowledge proof, so it is recovered by any party that becomes the API endpoint - under the re-homed/rogue API server (CVE-2026-30797) - and the leaked credential then authorizes the server-side address book. This vulnerability is associated with program files src/hbbs_http/sync.rs and program routines heartbeat sync body builder (emits preset-address-book-password). This issue affects RustDesk Client: through 1.4.8. | ||||
| CVE-2026-16130 | 1 Nearai | 1 Ironclaw | 2026-07-18 | 4.4 Medium |
| A vulnerability was identified in nearai ironclaw up to 0.29.1. The affected element is the function validate_path of the file src/tools/builtin/path_utils.rs of the component write_file. The manipulation leads to link following. Local access is required to approach this attack. The exploit is publicly available and might be used. The identifier of the patch is 369ff3d240cf3c0787b50e1e9f182e1a06c71255. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2026-46093 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: take vmap_purge_lock in shrinker decay_va_pool_node() can be invoked concurrently from two paths: __purge_vmap_area_lazy() when pools are being purged, and the shrinker via vmap_node_shrink_scan(). However, decay_va_pool_node() is not safe to run concurrently, and the shrinker path currently lacks serialization, leading to races and possible leaks. Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker path to ensure serialization with purge users. | ||||
| CVE-2026-45945 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix race condition during PASID entry replacement The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing an active PASID entry (e.g., during domain replacement), the current implementation calculates a new entry on the stack and copies it to the table using a single structure assignment. struct pasid_entry *pte, new_pte; pte = intel_pasid_get_entry(dev, pasid); pasid_pte_config_first_level(iommu, &new_pte, ...); *pte = new_pte; Because the hardware may fetch the 512-bit PASID entry in multiple 128-bit chunks, updating the entire entry while it is active (Present bit set) risks a "torn" read. In this scenario, the IOMMU hardware could observe an inconsistent state — partially new data and partially old data — leading to unpredictable behavior or spurious faults. Fix this by removing the unsafe "replace" helpers and following the "clear-then-update" flow, which ensures the Present bit is cleared and the required invalidation handshake is completed before the new configuration is applied. | ||||
| CVE-2026-53363 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags() iptfs_consume_frags() transfers paged fragments from one socket buffer to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is the same class of bug that was fixed in skb_try_coalesce() for CVE-2026-46300: when fragments backed by read-only page-cache pages are merged, the marker indicating their shared nature must be preserved so that ESP can decide correctly whether in-place encryption is safe. Apply the same two-line fix used in skb_try_coalesce() to iptfs_consume_frags(). | ||||
| CVE-2026-53362 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path In __ip6_append_data(), when the paged-allocation branch is taken (MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap (datalen = length + fraggap). When fraggap is non-zero, this is not the first skb and transhdrlen is zero. The fraggap bytes carried over from the previous skb are copied just past the fragment headers in the new skb's linear area. The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount, and the copy writes past skb->end into the trailing skb_shared_info. An unprivileged user can trigger this via a UDPv6 socket using MSG_MORE together with MSG_SPLICE_PAGES. The bad accounting was introduced by commit 773ba4fe9104 ("ipv6: avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix __ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative copy value caused -EINVAL to be returned. That later commit allowed MSG_SPLICE_PAGES to proceed in this case, making the corruption triggerable. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES case, remove the MSG_SPLICE_PAGES exception from the negative copy check. | ||||
| CVE-2026-53361 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Set gc_in_progress to true in unix_gc(). Igor Ushakov reported that unix_gc() could run with gc_in_progress being false if the work is scheduled while running: Thread 1 Thread 2 Thread 3 -------- -------- -------- unix_schedule_gc() unix_schedule_gc() `- if (!gc_in_progress) `- if (!gc_in_progress) |- gc_in_progress = true | `- queue_work() | unix_gc() <----------------/ | | |- gc_in_progress = true ... `- queue_work() | | `- gc_in_progress = false | | unix_gc() <---------------------------------------------' | ... /* gc_in_progress == false */ | `- gc_in_progress = false unix_peek_fpl() relies on gc_in_progress not to confuse GC by MSG_PEEK. Let's set gc_in_progress to true in unix_gc(). | ||||