Export limit exceeded: 26125 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26125 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-0171 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-11-02 | 5.5 Medium |
| A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV). | ||||
| CVE-2021-4204 | 4 Debian, Linux, Netapp and 1 more | 15 Debian Linux, Linux Kernel, H300s and 12 more | 2026-11-02 | 7.1 High |
| An out-of-bounds (OOB) memory access flaw was found in the Linux kernel's eBPF due to an Improper Input Validation. This flaw allows a local attacker with a special privilege to crash the system or leak internal information. | ||||
| CVE-2021-4159 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-11-02 | 4.4 Medium |
| A vulnerability was found in the Linux kernel's EBPF verifier when handling internal data structures. Internal memory locations could be returned to userspace. A local attacker with the permissions to insert eBPF code to the kernel can use this to leak internal kernel memory details defeating some of the exploit mitigations in place for the kernel. | ||||
| CVE-2026-99241 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_filemap_page_mkwrite() ntfs_filemap_page_mkwrite() calls iomap_page_mkwrite() without holding mapping->invalidate_lock, so a concurrent truncate or fallocate can be in the middle of invalidating pagecache and rewriting the runlist while the write fault maps blocks and dirties the folio. This races with ntfs_attr_fallocate(), which merges clusters into the in-memory runlist, drops the runlist lock, and only afterwards zeroes the newly allocated clusters on disk; and with the punch-hole/insert/collapse paths that free clusters after truncating the cache. Per Documentation/filesystems/locking.rst, ->page_mkwrite() must ensure there are no truncate/invalidate races, "usually mapping->invalidate_lock is suitable for proper serialization". xfs takes its mmaplock (= the invalidate_lock rwsem) shared in exactly this path. Take invalidate_lock shared around iomap_page_mkwrite(). The read-only fault path is already covered because filemap_fault() itself grabs invalidate_lock shared on instantiation/read paths; only page_mkwrite was bypassing it in this driver. | ||||
| CVE-2026-99242 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix race between fallocate and mmap reads The fallocate implementation only takes invalidate_lock for punch hole, collapse range, and insert range operations. For standard allocation modes (mode == 0, FALLOC_FL_KEEP_SIZE), the lock is not held. During ntfs_attr_fallocate(), new clusters are mapped to the runlist via ntfs_attr_map_cluster() before being zeroed by ntfs_dio_zero_range(). This creates a window where concurrent mmap page faults can read uninitialized disk data. Since mmap uses filemap_fault() which takes invalidate_lock in shared mode, it can fault in pages during this window and expose old disk contents to userspace. This is an information leak and data integrity issue. Fix by taking invalidate_lock for all fallocate operations, not just for punch/collapse/insert modes. This prevents concurrent page faults from accessing unzeroed clusters during the allocation window. | ||||
| CVE-2019-15291 | 1 Linux | 1 Linux Kernel | 2026-11-02 | N/A |
| An issue was discovered in the Linux kernel through 5.2.9. There is a NULL pointer dereference caused by a malicious USB device in the flexcop_usb_probe function in the drivers/media/usb/b2c2/flexcop-usb.c driver. | ||||
| CVE-2026-99187 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pmu_migrate_context() leaving events behind __perf_pmu_remove() walks the group leaders of a CPU and PMU with perf_event_groups_for_cpu_pmu(), removing each one as it goes. perf_remove_from_context() takes the leader out of the groups rbtree, after which rb_next() on that node returns NULL, prematurely ending the walk. Other groups stay behind in the source context. On CPU hotplug, they are then torn down with the dying CPU. They keep running until teardown, while the PMU's interrupt and migrated events are on a new CPU, which drivers rely on never happening. Walk ctx->event_list instead and pick out the PMU's events by their pmu_ctx. | ||||
| CVE-2026-99189 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mxc: fix race between chained IRQ handler install and probe completion mxc_update_irq_chained_handler() is called before the IRQ domain, the generic IRQ chip, and the port list entry are set up. If an interrupt arrives in that window: - mx3_gpio_irq_handler() calls generic_handle_domain_irq() with port->domain still NULL. - mx2_gpio_irq_handler() walks mxc_gpio_ports, but the port has not been added to the list yet. Additionally, if any of the subsequent probe steps (gpio_generic_chip_init(), devm_gpiochip_add_data(), irq_domain_create_legacy(), or mxc_gpio_init_gc()) fail, the error paths never unregister the chained handler, leaving a dangling handler that points at freed memory. Move the handler installation after all its dependencies are ready and after list_add_tail(), so the handler is never live while the data structures it touches are incomplete, and is never installed if probe fails. | ||||
| CVE-2026-99181 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: autofs: ignore notification errors from a replaced pipe autofs_notify_daemon() takes a reference to the current notification pipe under wq_mutex, then drops the mutex before writing the request. The write can block while the daemon enters catatonic mode and installs a replacement pipe. If the old pipe's reader is then closed, the delayed write returns -EPIPE and the generic error path enters catatonic mode again. That transition acts on the current superblock state, closes the replacement pipe, and releases the new daemon generation's wait queues. Only enter catatonic mode when the pipe which failed is still the current pipe. Factor the already-locked transition so the identity check and state change are atomic with respect to another replacement. This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest. An unprivileged UID 65534 lookup filled the old packet pipe before a normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe received HUP and both a pending victim lookup and a later lookup failed with ENOENT in two out of two fresh-mount runs. With this change, the new pipe remained active, received an intact 304-byte request, and both victim lookups completed in two out of two runs. Normal lookup and restart-without-a-blocked-writer controls passed. No KASAN, oops, refcount, or lock diagnostic was observed. A source reproducer and complete local logs are available privately on request. The demonstrated impact is limited to denial of a shared autofs service during a legitimate daemon restart. No memory corruption, information leak, privilege escalation, or code execution primitive was observed. | ||||
| CVE-2026-99192 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: unshare the skb before writing the control block bcmgenet stores first_cb, last_cb and bytes_sent in the skb control block and reads them back on completion to free the skb and credit BQL. ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit a shared skb that is still in the ring. The next transmit overwrites last_cb, so the earlier slots complete without crediting their bytes and BQL stalls the queue until the watchdog resets it. Unshare the skb before writing the control block. Reproduce with pktgen in clone_skb mode, which hands the driver the same skb while earlier copies are still in the ring: modprobe pktgen pg=/proc/net/pktgen echo "add_device eth0" > $pg/kpktgend_0 echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0 echo "dst 192.0.2.1" > $pg/eth0 echo "clone_skb 8" > $pg/eth0 echo "count 0" > $pg/eth0 echo start > $pg/pgctrl & sleep 5 echo stop > $pg/pgctrl wait cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at zero. | ||||
| CVE-2026-99202 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix SMP IO deadlock during HA resume smp_execute_task_sg() calls pm_runtime_get_sync() on the host before issuing an SMP command. When that command is itself issued from the HA resume path, the get_sync() deadlocks: it waits for the ongoing resume (the device is RPM_RESUMING), while the resume is blocked in sas_drain_work() waiting for that same SMP IO to complete. The deadlock needs an expander-attached SATA disk. During sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata() -> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() -> sas_phy_reset() -> sas_smp_phy_control() -> smp_execute_task_sg()). Direct-attached SATA resets through lldd_control_phy() and SSP devices use TMFs, so neither hits this. Replace the get_sync()/put_sync() pair with pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only needs to hold off autosuspend while the SMP is in flight, and it must not try to resume the host: a sync resume issued from the HA resume path itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init has already reinitialized the hardware, so the device is accessible without one. The usage reference is still required. Discovery work normally runs inside an event worker's PM reference, taken at sas_notify_port_event() notify time and held until the handler has flushed the disco queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN from within the revalidation worker itself, and flush_workqueue() does not wait for work items queued during execution, so that chained revalidation runs with no outer PM reference - without the get_noresume(), its SMP could race autosuspend. For the BSG path, sas_smp_handler() is the only caller which may find the host autosuspended: expander SMP requests do not go through any SCSI device request queue, so nothing else in that path holds the host awake. Resume it there with pm_runtime_resume_and_get() and check the result. | ||||
| CVE-2026-99159 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx() On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[] shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma() dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader() writes two such indices into meta->buffers[], which rb_cpu_meta_valid() would reject on the next boot, discarding the previous boot's trace. A CPU's sub-buffer array starts after its meta header and the nr_subbufs integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx() inverts that calculation but skips only the integers, not the header, so its base is one sub-buffer low whenever the omitted header size crosses the alignment boundary. Invert the calculation with rb_subbufs_from_meta() rather than repeating it. rb_range_buffer() maps an index back to an address through the same helper, so the two directions can no longer disagree. | ||||
| CVE-2026-99154 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Reject a negative task index from parse_pdu_itt A transport that implements parse_pdu_itt hands libiscsi an index taken from the PDU, and both lookups bound it from above only: if (i >= session->cmds_max) i and cmds_max are both int, so a negative index passes and session->cmds[i] is read from before the array. be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag, *index = (int)itt; and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the hardware async ring without replacing its ITT, so the value is the target's. It also reports the session's own age rather than the one in the tag, which leaves the age comparison in iscsi_verify_itt() with nothing to reject. Bound the index from below in both lookups. | ||||
| CVE-2026-99156 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: st: Fix use-after-free race between st_remove() and st_open() st_remove() drops the probe reference on the scsi_tape with kref_put() and only afterwards removes its index from st_index_idr. If that was the last reference, scsi_tape_release() frees the structure while it is still published in the idr. scsi_tape_get(), called from st_open(), looks up the tape in st_index_idr and takes a reference under st_ref_mutex and st_index_lock. remove_cdevs() does not wait for opens that are already past chrdev_open(), so an open that is blocked on st_ref_mutex while st_remove() holds it can take the mutex as soon as st_remove() drops it, find the freed tpnt in the idr and call kref_get() on it: BUG: KASAN: slab-use-after-free in st_open Write of size 4 ... st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291) chrdev_open ... Freed by task ...: kfree st_remove (drivers/scsi/st.c:4512) Remove the index from the idr before dropping the reference, all under st_ref_mutex. A concurrent scsi_tape_get() now either runs first and holds a valid reference that keeps the tape alive, or runs afterwards and finds nothing, so st_open() fails with -ENXIO. This restores the ordering st_remove() had before the conversion to st_index_idr, where the tape was unpublished from scsi_tapes[] before the final kref_put(). | ||||
| CVE-2026-99158 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix false warning in ring_buffer_map_get_reader() The mmap reader can warn when it catches up with a writer that is still committing events. rb_get_reader_page() returns NULL in this case, but ring_buffer_map_get_reader() treats that result as an error. The initial rb_per_cpu_empty() check filters out an empty buffer, but it does not guarantee that the next reader page has committed data. Writers do not take reader_lock and can advance commit_page before publishing the committed length on the new page. rb_get_reader_page() can swap to that page, catch up with the writer and return NULL. Handle NULL through the existing no-data exit without warning. Remove the caller's reader_page == commit_page check as well, since the reader-page helper already handles that case. The existing metadata update and return path remain in place. | ||||
| CVE-2026-99160 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not show buffer_meta for CPUs without a buffer The per_cpu/cpuN/buffer_meta files are created for every possible CPU, but buffer->buffers[cpu] is only allocated once that CPU comes online. Reading the file of a CPU that never came online dereferences a NULL cpu_buffer in rbm_start(). Fail the open with -ENODEV when the CPU has no buffer, as the other per CPU ring buffer interfaces do. | ||||
| CVE-2026-99161 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe() In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any subsequent operation fails or when the module is unloaded, the clock reference count is never decremented via clk_put(), leading to a resource leak. Switch to devm_clk_get() so that the clock is automatically managed and released. | ||||
| CVE-2026-99162 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix use-after-free bug when adding shared proxies The GPIO lookup table can stay alive for longer than the kobject whose name string's address we're assigning to lookup->dev_id. Fix a potential UAF by duplicating the string. | ||||
| CVE-2026-99185 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition in split transaction handling For a split transaction, either fw_core_handle_response() or split_transaction_timeout_callback() may manipulate the same transaction entry in the pending transaction list. The return value of timer_delete() is used to determine which function handles the entry. If the transaction is a split transaction and timer_delete() returns zero, the timeout callback may already be running. In this case, the response handler must leave the entry in the list for the timeout callback to remove. A previous code refactoring broke this behavior, introducing a race condition in which both functions could process the same transaction. This could lead to a use-after-free on the transaction initiator side. Fix the regression by ensuring that the response handler does not process the transaction when timer_delete() returns zero. The timeout callback is responsible for removing the entry from the pending transaction list. | ||||
| CVE-2026-99153 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-31 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warning. Validate the reflected ITT the way iscsi_itt_to_ctask() validates a command ITT, and require the task to be in flight and not a SCSI command. [ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206 [ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25 [ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060 [ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504 [ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000 [ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000 [ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000 [ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0 [ 6.255439] PKRU: 55555554 [ 6.255564] Call Trace: [ 6.255674] <IRQ> [ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0 [ 6.256733] iscsi_complete_pdu+0x54/0xa0 [ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250 [ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.258061] __tcp_read_sock+0x1ab/0x810 [ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.259808] tcp_data_queue+0x1f13/0x4cd0 [ 6.260567] tcp_rcv_established+0x8a5/0x3a00 [ 6.261931] tcp_v4_do_rcv+0x449/0x960 [ 6.262269] tcp_v4_rcv+0x2245/0x3bc0 | ||||