Export limit exceeded: 23977 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 23977 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23977 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53325 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: agp/amd64: Fix broken error propagation in agp_amd64_probe() A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the issue by correcting the error check in agp_amd64_probe() to abort properly when cache_nbs() returns any negative error code. This prevents the driver from erroneously proceeding without hardware, thereby avoiding the subsequent NULL pointer dereference at its source. | ||||
| CVE-2026-53177 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. | ||||
| CVE-2026-53158 | 1 Linux | 1 Linux Kernel | 2026-07-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix NULL pointer dereference in rpmsg callback A NULL pointer dereference was observed on Hawi at boot when the DSP sends a glink message before fastrpc_rpmsg_probe() has completed initialization: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178 pc : _raw_spin_lock_irqsave+0x34/0x8c lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] ... Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] qcom_glink_native_rx+0x538/0x6a4 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem] The faulting address 0x178 corresponds to the lock variable inside struct fastrpc_channel_ctx, confirming that cctx is NULL when fastrpc_rpmsg_callback() attempts to take the spinlock. There are two issues here. First, dev_set_drvdata() is called before spin_lock_init() and idr_init(), leaving a window where the callback can retrieve a valid cctx pointer but operate on an uninitialized spinlock. Second, the rpmsg channel becomes live as soon as the driver is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata() is called at all, resulting in dev_get_drvdata() returning NULL. Fix both issues by moving all cctx initialization ahead of dev_set_drvdata() so the structure is fully initialized before it becomes visible to the callback, and add a NULL check in fastrpc_rpmsg_callback() as a guard against any remaining window. | ||||
| CVE-2026-53157 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: phonet: free phonet_device after RCU grace period phonet_device_destroy() removes a phonet_device from the per-net device list with list_del_rcu(), but frees it immediately. RCU readers walking the same list can still hold a pointer to the object after it has been removed, leading to a slab-use-after-free. Use kfree_rcu(), matching the lifetime rule already used by phonet_address_del() for the same object type. | ||||
| CVE-2026-53138 | 1 Linux | 1 Linux Kernel | 2026-07-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93) | ||||
| CVE-2026-46331 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix pedit partial COW leading to page cache corruption tcf_pedit_act() computes the COW range for skb_ensure_writable() once before the key loop using tcfp_off_max_hint, but the hint does not account for the runtime header offset added by typed keys. This can leave part of the write region un-COW'd. Fix by moving skb_ensure_writable() inside the per-key loop where the actual write offset is known, and add overflow checking on the offset arithmetic. For negative offsets (e.g. Ethernet header edits at ingress), use skb_cow() to COW the headroom instead. Guard offset_valid() against INT_MIN, where negation is undefined. | ||||
| CVE-2026-46252 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix locking in regulator_resolve_supply() error path If late enabling of a supply regulator fails in regulator_resolve_supply(), the code currently triggers a lockdep warning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8 as the regulator_list_mutex must be held when calling _regulator_put(). To solve this, simply switch to using regulator_put(). While at it, we should also make sure that no concurrent access happens to our rdev while we clear out the supply pointer. Add appropriate locking to ensure that. While the code in question will be removed altogether in a follow-up commit, I believe it is still beneficial to have this corrected before removal for future reference. | ||||
| CVE-2026-43219 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been registered yet If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly. | ||||
| CVE-2026-31755 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix NULL pointer dereference in ep_queue When the gadget endpoint is disabled or not yet configured, the ep->desc pointer can be NULL. This leads to a NULL pointer dereference when __cdns3_gadget_ep_queue() is called, causing a kernel crash. Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the standard return code for unconfigured endpoints. This prevents potential crashes when ep_queue is called on endpoints that are not ready. | ||||
| CVE-2026-31451 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption. | ||||
| CVE-2026-31419 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free in bond_xmit_broadcast() bond_xmit_broadcast() reuses the original skb for the last slave (determined by bond_is_last_slave()) and clones it for others. Concurrent slave enslave/release can mutate the slave list during RCU-protected iteration, changing which slave is "last" mid-loop. This causes the original skb to be double-consumed (double-freed). Replace the racy bond_is_last_slave() check with a simple index comparison (i + 1 == slaves_count) against the pre-snapshot slave count taken via READ_ONCE() before the loop. This preserves the zero-copy optimization for the last slave while making the "last" determination stable against concurrent list mutations. The UAF can trigger the following crash: ================================================================== BUG: KASAN: slab-use-after-free in skb_clone Read of size 8 at addr ffff888100ef8d40 by task exploit/147 CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334) bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593) dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887) __dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838) ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136) ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219) ip6_output (net/ipv6/ip6_output.c:250) ip6_send_skb (net/ipv6/ip6_output.c:1985) udp_v6_send_skb (net/ipv6/udp.c:1442) udpv6_sendmsg (net/ipv6/udp.c:1733) __sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Allocated by task 147: Freed by task 147: The buggy address belongs to the object at ffff888100ef8c80 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 192 bytes inside of freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60) Memory state around the buggy address: ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== | ||||
| CVE-2026-23204 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: use skb_header_pointer_careful() skb_header_pointer() does not fully validate negative @offset values. Use skb_header_pointer_careful() instead. GangMin Kim provided a report and a repro fooling u32_classify(): BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0 net/sched/cls_u32.c:221 | ||||
| CVE-2025-23131 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dlm: prevent NPD when writing a positive value to event_done do_uevent returns the value written to event_done. In case it is a positive value, new_lockspace would undo all the work, and lockspace would not be set. __dlm_new_lockspace, however, would treat that positive value as a success due to commit 8511a2728ab8 ("dlm: fix use count with multiple joins"). Down the line, device_create_lockspace would pass that NULL lockspace to dlm_find_lockspace_local, leading to a NULL pointer dereference. Treating such positive values as successes prevents the problem. Given this has been broken for so long, this is unlikely to break userspace expectations. | ||||
| CVE-2022-50114 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: 9p: fix refcount leak in p9_read_work() error handling p9_req_put need to be called when m->rreq->rc.sdata is NULL to avoid temporary refcount leak. [Dominique: commit wording adjustments, p9_req_put argument fixes for rebase] | ||||
| CVE-2022-49803 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: Fix memory leak of nsim_dev->fa_cookie kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). | ||||
| CVE-2026-20213 | 1 Cisco | 1 Secure Endpoint | 2026-07-03 | 7.5 High |
| A vulnerability in the PE file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in PE files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains PE content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-20217 | 2026-07-03 | 7.5 High | ||
| A vulnerability in the PESpin file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in PESpin files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains PESpin content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-20215 | 2026-07-03 | 7.5 High | ||
| A vulnerability in the 7z file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in 7z files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains 7z content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-54262 | 1 Wagtail | 1 Wagtail | 2026-07-03 | 4.3 Medium |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, a low-level user with the "Can submit translation" permission can create translations for any page, including those they do not have permissions for. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. | ||||
| CVE-2026-57272 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-03 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### byPass command index-out-of-bound | ||||