Export limit exceeded: 365244 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (365244 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50840 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: snic: Fix possible UAF in snic_tgt_create() Smatch reports a warning as follows: drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn: '&tgt->list' not removed from list If device_add() fails in snic_tgt_create(), tgt will be freed, but tgt->list will not be removed from snic->disc.tgt_list, then list traversal may cause UAF. Remove from snic->disc.tgt_list before free(). | ||||
| CVE-2022-50844 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] .odn_edit_dpm_table = smu_od_edit_dpm_table, ^~~~~~~~~~~~~~~~~~~~~ 1 error generated. There are only two implementations of ->odn_edit_dpm_table() in 'struct amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls ->od_edit_dpm_table() from 'struct pptable_funcs' and pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct pp_hwmgr_func', which both have a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND'. Update the type parameter in both the prototype in 'struct amd_pm_funcs' and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which cleans up the warning. | ||||
| CVE-2022-50845 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix inode leak in ext4_xattr_inode_create() on an error path There is issue as follows when do setxattr with inject fault: [localhost]# fsck.ext4 -fn /dev/sda e2fsck 1.46.6-rc1 (12-Sep-2022) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Unattached zero-length inode 15. Clear? no Unattached inode 15 Connect to /lost+found? no Pass 5: Checking group summary information /dev/sda: ********** WARNING: Filesystem still has errors ********** /dev/sda: 15/655360 files (0.0% non-contiguous), 66755/2621440 blocks This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()' fails, dropping i_nlink of the inode is needed. Or will lead to inode leak. | ||||
| CVE-2022-50846 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path which will call mmc_free_host(). | ||||
| CVE-2022-50847 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: it6505: Initialize AUX channel in it6505_i2c_probe During device boot, the HPD interrupt could be triggered before the DRM subsystem registers it6505 as a DRM bridge. In such cases, the driver tries to access AUX channel and causes NULL pointer dereference. Initializing the AUX channel earlier to prevent such error. | ||||
| CVE-2022-50848 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drivers: dio: fix possible memory leak in dio_init() If device_register() returns error, the 'dev' and name needs be freed. Add a release function, and then call put_device() in the error path, so the name is freed in kobject_cleanup() and to the 'dev' is freed in release function. | ||||
| CVE-2022-50850 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ipr: Fix WARNING in ipr_init() ipr_init() will not call unregister_reboot_notifier() when pci_register_driver() fails, which causes a WARNING. Call unregister_reboot_notifier() when pci_register_driver() fails. notifier callback ipr_halt [ipr] already registered WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29 notifier_chain_register+0x16d/0x230 Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks agpgart cfbft CPU: 3 PID: 299 Comm: modprobe Tainted: G W 6.1.0-rc1-00190-g39508d23b672-dirty #332 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:notifier_chain_register+0x16d/0x230 Call Trace: <TASK> __blocking_notifier_chain_register+0x73/0xb0 ipr_init+0x30/0x1000 [ipr] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2022-50853 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a credential leak in _nfs4_discover_trunking() | ||||
| CVE-2022-50855 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: prevent leak of lsm program after failed attach In [0], we added the ability to bpf_prog_attach LSM programs to cgroups, but in our validation to make sure the prog is meant to be attached to BPF_LSM_CGROUP, we return too early if the check fails. This results in lack of decrementing prog's refcnt (through bpf_prog_put) leaving the LSM program alive past the point of the expected lifecycle. This fix allows for the decrement to take place. [0] https://lore.kernel.org/all/20220628174314.1216643-4-sdf@google.com/ | ||||
| CVE-2022-50863 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: free unused skb to prevent memory leak This avoid potential memory leak under power saving mode. | ||||
| CVE-2022-50866 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: pxa: fix null-pointer dereference in filter() kasprintf() would return NULL pointer when kmalloc() fail to allocate. Need to check the return pointer before calling strcmp(). | ||||
| CVE-2022-50868 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: amd - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the normal and error path. | ||||
| CVE-2022-50882 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix memory leak in uvc_gpio_parse Previously the unit buffer was allocated before checking the IRQ for privacy GPIO. In case of error, the unit buffer was leaked. Allocate the unit buffer after the IRQ to avoid it. Addresses-Coverity-ID: 1474639 ("Resource leak") | ||||
| CVE-2022-50870 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: avoid device tree lookups in rtas_os_term() rtas_os_term() is called during panic. Its behavior depends on a couple of conditions in the /rtas node of the device tree, the traversal of which entails locking and local IRQ state changes. If the kernel panics while devtree_lock is held, rtas_os_term() as currently written could hang. Instead of discovering the relevant characteristics at panic time, cache them in file-static variables at boot. Note the lookup for "ibm,extended-os-term" is converted to of_property_read_bool() since it is a boolean property, not an RTAS function token. [mpe: Incorporate suggested change from Nick] | ||||
| CVE-2022-50872 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: OMAP2+: Fix memory leak in realtime_counter_init() The "sys_clk" resource is malloced by clk_get(), it is not released when the function return. | ||||
| CVE-2025-59331 | 2026-04-15 | N/A | ||
| is-arrayish checks if an object can be used like an Array. On 8 September 2025, an npm publishing account for is-arrayish was taken over after a phishing attack. Version 0.3.3 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. See references below for more information on the payload. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 0.3.4. | ||||
| CVE-2025-59330 | 2026-04-15 | N/A | ||
| error-ex allows error subclassing and stack customization. On 8 September 2025, an npm publishing account for error-ex was taken over after a phishing attack. Version 1.3.3 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 1.3.4. | ||||
| CVE-2025-59162 | 2026-04-15 | N/A | ||
| color-convert provides plain color conversion functions in JavaScript. On 8 September 2025, the npm publishing account for color-convert was taken over after a phishing attack. Version 3.1.1 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 3.1.2. | ||||
| CVE-2025-59155 | 2026-04-15 | N/A | ||
| hackmd-mcp is a Model Context Protocol server for integrating HackMD's note-taking platform with AI assistants. From 1.4.0 to before 1.5.0, hackmd-mcp contains a server-side request forgery (SSRF) vulnerability when the server is run in HTTP transport mode. Arbitrary hackmdApiUrl values supplied via the Hackmd-Api-Url HTTP header or a base64-encoded JSON query parameter are accepted without validation, allowing attackers to redirect outbound API requests to internal network services, access internal endpoints, perform network reconnaissance, and bypass network access controls. The stdio transport mode is not affected because it only accepts stdio requests. The issue is fixed in version 1.5.0, which enforces allowed endpoints and supports the ALLOWED_HACKMD_API_URLS environment variable. Users should update to 1.5.0 or later or apply documented mitigations such as switching to stdio mode, restricting outbound network access, or filtering the Hackmd-Api-Url header and related query parameter via a reverse proxy. | ||||
| CVE-2025-59154 | 1 Igniterealtime | 1 Openfire | 2026-04-15 | 5.9 Medium |
| Openfire is an XMPP server licensed under the Open Source Apache License. Openfire’s SASL EXTERNAL mechanism for client TLS authentication contains a vulnerability in how it extracts user identities from X.509 certificates. Instead of parsing the structured ASN.1 data, the code calls X509Certificate.getSubjectDN().getName() and applies a regex to look for CN=. This method produces a provider-dependent string that does not escape special characters. In SunJSSE (sun.security.x509.X500Name), for example, commas and equals signs inside attribute values are not escaped. As a result, a malicious certificate can embed CN= inside another attribute value (e.g. OU="CN=admin,"). The regex will incorrectly interpret this as a legitimate Common Name and extract admin. If SASL EXTERNAL is enabled and configured to map CNs to user accounts, this allows the attacker to impersonate another user. The fix is included in Openfire 5.0.2 and 5.1.0. | ||||