Export limit exceeded: 25087 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25087 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68172 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: make huge_ptep_get handled unaligned addresses huge_ptep_get() can be handed a virtual address pointing to the middle of a contpmd/contpte mapped hugetlb folio (examples of callers are pagemap_hugetlb_range, page_mapped_in_vma). The arm64 helper rewalks the pgtables in find_num_contig to answer whether the huge pte we have maps a contpmd or a contpte hugetlb folio, and returns CONT_PMDS or CONT_PTES, so that it can collect a/d bits over the contiguous ptes. We can falsely return CONT_PTES instead of CONT_PMDS if the addr is not aligned. On systems where CONT_PTES != CONT_PMDS (meaning page size is 16K), we could collect excess A/D bit state, meaning extra work for the kernel. Even worse, we may iterate beyond the PTE table and dereference a garbage ptep pointer to access physical memory we don't own. Since the ptep pointer is a linear map address, we may run off the end of the linear map or into a hole, dereference a VA not mapped into the kernel pgtables and cause kernel panic. Fix this by aligning the pmdp pointer down to a contpmd base before checking equality with the passed huge pte pointer, to correctly answer whether the huge pte is the base of a contpmd block. | ||||
| CVE-2026-68098 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound DACL dedup walk to copied ACEs set_ntacl_dacl() can stop copying ACEs before consuming the full input DACL when size accounting overflows. When that happens, num_aces reflects only the ACEs that were actually copied into the output DACL, but set_posix_acl_entries_dacl() still receives nt_num_aces and uses it to walk the existing ACE array during dedup. That makes the dedup walk scan past the copied ACE array and inspect buffer tail that does not contain valid ACEs. Split the two meanings currently carried by the NT ACE count. Pass the number of copied NT ACEs to bound the dedup walk, and preserve the original "input DACL had NT ACEs" state separately for the Everyone/default ACL fallback. This keeps the dedup walk aligned with the ACEs that are actually present in the rebuilt DACL. | ||||
| CVE-2026-21038 | 2 Samsung, Samsung Mobile | 2 Android Usb Driver, Android Usb Driver For Windows | 2026-08-13 | 5.5 Medium |
| Improper input validation in Samsung Android USB Driver for Windows prior to version 1.9.5.0 allows local attacker to access out-of-bounds memory. | ||||
| CVE-2026-46600 | 1 Golang | 1 Net | 2026-08-13 | 7.5 High |
| Parsing an invalid SVCB or HTTPS RR can panic when the size of a parameter value overflows the message buffer. | ||||
| CVE-2026-17220 | 1 Ibm | 1 I | 2026-08-13 | 8.2 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service and modify authentication metadata due to a buffer overflow. | ||||
| CVE-2026-16859 | 1 Ibm | 1 I | 2026-08-13 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read. | ||||
| CVE-2026-73563 | 1 Backstage | 1 Backstage | 2026-08-13 | 4.7 Medium |
| Backstage is an open framework for building developer portals. Prior to 0.29.2, the experimental dynamic client registration and client ID metadata document features in the @backstage/plugin-auth-backend use full-string matcher.isMatch glob matching for auth.experimentalDynamicClientRegistration.allowedRedirectUriPatterns and the auth.experimentalClientIdMetadataDocuments allowedClientIdPatterns and allowedRedirectUriPatterns options. A hostname wildcard can match across URL component boundaries, allowing an attacker-controlled redirect URI with a trusted hostname suffix in its path to pass the allowlist and receive an OAuth authorization code after a victim completes the flow. Patterns without an explicit protocol can match unintended protocols, and redirect URIs containing embedded credentials are accepted after user information is stripped for matching. The features are experimental and disabled by default; only deployments that enable them and configure custom wildcard-hostname or protocol-less patterns are affected. This issue is first fixed in prerelease version 0.29.2. | ||||
| CVE-2026-63517 | 1 Microsoft | 9 365 Apps, Microsoft 365, Office 2016 and 6 more | 2026-08-13 | 5.5 Medium |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to disclose information locally. | ||||
| CVE-2026-63519 | 1 Microsoft | 13 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 10 more | 2026-08-13 | 7.8 High |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-63527 | 1 Microsoft | 15 365 Apps, Microsoft 365, Microsoft Office 365 For Mac and 12 more | 2026-08-13 | 7.8 High |
| Stack-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-63532 | 1 Microsoft | 9 365 Apps, Microsoft 365, Office 2016 and 6 more | 2026-08-13 | 7.8 High |
| Integer overflow or wraparound in Microsoft Office allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-64898 | 1 Microsoft | 8 365 Apps, Microsoft 365, Office 2019 and 5 more | 2026-08-13 | 7.8 High |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-64903 | 1 Microsoft | 9 365 Apps, Microsoft 365, Office 2016 and 6 more | 2026-08-13 | 7.8 High |
| Integer overflow or wraparound in Microsoft Office allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-73564 | 1 Fatedier | 1 Frp | 2026-08-13 | N/A |
| frp is a fast reverse proxy. From 0.53.0 until 0.70.1, frp's optional SSH Tunnel Gateway in pkg/ssh/server.go parses an SSH exec channel request by adding 4 to an attacker-controlled four-byte big-endian length. A length of 0xFFFFFFFF makes the uint32 addition wrap to 3, defeats the payload bounds check, and causes payload[4:3] to panic in TunnelServer.handleNewChannel. When no authorized-keys file is configured, sshConfig.NoClientAuth permits an unauthenticated peer to reach this channel phase before the frp token is checked, so a single five-byte request terminates the frps process and drops every active tunnel. This issue is fixed in version 0.70.1. | ||||
| CVE-2026-64271 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: touchwin - reset the packet index on every complete packet tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the index reaches TW_LENGTH without the equality holding, is never reset, and keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte array and the rest of the heap-allocated struct tw, one attacker-chosen byte at a time -- an unbounded, device-driven heap out-of-bounds write. Reset the index on every completed packet and report an event only when the two Y bytes match, like the other serio touchscreen drivers do. | ||||
| CVE-2026-64273 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: iforce - bound the device-reported force-feedback effect index iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index of 32..127 the test_and_set_bit()/test_and_clear_bit() is an out-of-bounds single-bit read-modify-write past the array. core_effects[] is the second-to-last member of struct iforce, so the write lands in the trailing members and beyond the embedding kzalloc()'d iforce_serio / iforce_usb object. data[1] is unvalidated device payload on both transports (the USB interrupt endpoint and serio), and the status path is not gated on force feedback being present, so a malicious or counterfeit device can set or clear a bit at an attacker-chosen offset past the object. Reject an out-of-range index instead of indexing with it. Bound against the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so the check guarantees memory safety regardless of how many effects the device registered. A legitimate "effect started/stopped" status always carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are unaffected; the neighbouring mark_core_as_ready() loop is already bounded and is left untouched. | ||||
| CVE-2026-64276 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls, which bound the index only against keycodemax. This is the same defect as the F3A handler, which was copied from F30. Size the keymap for the full gpioled_count; the mapping loop still assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. | ||||
| CVE-2026-62799 | 1 Microsoft | 2 Windows 11 26h1, Windows 11 26h1 | 2026-08-13 | 7.8 High |
| Heap-based buffer overflow in Windows SMB Client allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-48440 | 1 Adobe | 3 Coldfusion, Coldfusion 2023, Coldfusion 2025 | 2026-08-13 | 8.1 High |
| ColdFusion is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploit depends on conditions beyond the attacker's control. Exploitation of this issue does not require user interaction. | ||||
| CVE-2026-14256 | 1 Lenovo | 262 100w Gen 4 Laptop Lenovo Elan Trackpoint Driver For Windows 11 Version 22h2 Or Later - Lenovo 100w Gen 4 300w Yoga Gen 4 500w Yoga Gen 4, 100w Gen 5 Type 83ld 83le Laptop Lenovo Elan Trackpoint Driver For Windows 11 Version 23h2 Or Later - Lenovo 100w Gen 5 300w 2-in-1 Gen 5 500w 2-in-1 Gen 5, 11e Yoga Gen 6 Type 20se 20sf Laptop Thinkpad Elan Clickpad Driver For Windows 11 Version 21h2 Or Later 10 Version 1809 Or Later - Thinkpad Yoga 11e 6th Gen and 259 more | 2026-08-13 | 4.7 Medium |
| ELAN reported a potential out-of-bounds write vulnerability in the ELAN TrackPoint driver that, under certain circumstances, could allow a local authenticated user to cause a system crash. | ||||