Export limit exceeded: 365581 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (365581 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68236 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3) According to UFS specifications, the power-off sequence for a UFS device includes: - Sending an SSU command with Power_Condition=3 and await a response. - Asserting RST_N low. - Turning off REF_CLK. - Turning off VCC. - Turning off VCCQ/VCCQ2. As part of ufs shutdown, after the SSU command completion, asserting hardware reset (HWRST) triggers the device firmware to wake up and execute its reset routine. This routine initializes hardware blocks and takes a few milliseconds to complete. During this time, the ICCQ draws a large current. This large ICCQ current may cause issues for the regulator which is supplying power to UFS, because the turn off request from UFS driver to the regulator framework will be immediately followed by low power mode(LPM) request by regulator framework. This is done by framework because UFS which is the only client is requesting for disable. So if the rail is still in the process of shutting down while ICCQ exceeds LPM current thresholds, and LPM mode is activated in hardware during this state, it may trigger an overcurrent protection (OCP) fault in the regulator. To prevent this, a 10ms delay is added after asserting HWRST. This allows the reset operation to complete while power rails remain active and in high-power mode. Currently there is no way for Host to query whether the reset is completed or not and hence this the delay is based on experiments with Qualcomm UFS controllers across multiple UFS vendors. | ||||
| CVE-2025-68227 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix proto fallback detection with BPF The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: <TASK> do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-68220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error Make knav_dma_open_channel consistently return NULL on error instead of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h returns NULL when the driver is disabled, but the driver implementation does not even return NULL or ERR_PTR on failure, causing inconsistency in the users. This results in a crash in netcp_free_navigator_resources as followed (trimmed): Unhandled fault: alignment exception (0x221) at 0xfffffff2 [fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000 Internal error: : 221 [#1] SMP ARM Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE Hardware name: Keystone PC is at knav_dma_close_channel+0x30/0x19c LR is at netcp_free_navigator_resources+0x2c/0x28c [... TRIM...] Call trace: knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c netcp_ndo_open from __dev_open+0x114/0x29c __dev_open from __dev_change_flags+0x190/0x208 __dev_change_flags from netif_change_flags+0x1c/0x58 netif_change_flags from dev_change_flags+0x38/0xa0 dev_change_flags from ip_auto_config+0x2c4/0x11f0 ip_auto_config from do_one_initcall+0x58/0x200 do_one_initcall from kernel_init_freeable+0x1cc/0x238 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x38 [... TRIM...] Standardize the error handling by making the function return NULL on all error conditions. The API is used in just the netcp_core.c so the impact is limited. Note, this change, in effect reverts commit 5b6cb43b4d62 ("net: ethernet: ti: netcp_core: return error while dma channel open issue"), but provides a less error prone implementation. | ||||
| CVE-2025-68213 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix possible vport_config NULL pointer deref in remove Attempting to remove the driver will cause a crash in cases where the vport failed to initialize. Following trace is from an instance where the driver failed during an attempt to create a VF: [ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated [ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms) [ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028 ... [ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf] ... [ 1723.364973] Call Trace: [ 1723.365475] <TASK> [ 1723.365972] pci_device_remove+0x42/0xb0 [ 1723.366481] device_release_driver_internal+0x1a9/0x210 [ 1723.366987] pci_stop_bus_device+0x6d/0x90 [ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20 [ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120 [ 1723.368309] sriov_disable+0x34/0xe0 [ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf] [ 1723.368982] sriov_numvfs_store+0xda/0x1c0 Avoid the NULL pointer dereference by adding NULL pointer check for vport_config[i], before freeing user_config.q_coalesce. | ||||
| CVE-2025-68191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: use netdev_warn() instead of netdev_WARN() netdev_WARN() uses WARN/WARN_ON to print a backtrace along with file and line information. In this case, udp_tunnel_nic_register() returning an error is just a failed operation, not a kernel bug. udp_tunnel_nic_register() can fail due to a memory allocation failure (kzalloc() or udp_tunnel_nic_alloc()). This is a normal runtime error and not a kernel bug. Replace netdev_WARN() with netdev_warn() accordingly. | ||||
| CVE-2025-68187 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mdio: Check regmap pointer returned by device_node_to_regmap() The call to device_node_to_regmap() in airoha_mdio_probe() can return an ERR_PTR() if regmap initialization fails. Currently, the driver stores the pointer without validation, which could lead to a crash if it is later dereferenced. Add an IS_ERR() check and return the corresponding error code to make the probe path more robust. | ||||
| CVE-2025-68086 | 2 Merkulove, Wordpress | 2 Reformer For Elementor, Wordpress | 2026-04-15 | 5.4 Medium |
| Missing Authorization vulnerability in merkulove Reformer for Elementor reformer-elementor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Reformer for Elementor: from n/a through <= 1.0.6. | ||||
| CVE-2025-68078 | 2 Themenectar, Wordpress | 2 Salient Core, Wordpress | 2026-04-15 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ThemeNectar Salient Portfolio salient-portfolio allows Stored XSS.This issue affects Salient Portfolio: from n/a through <= 1.8.2. | ||||
| CVE-2025-68076 | 2 Select-themes, Wordpress | 2 Stockholm Core, Wordpress | 2026-04-15 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Select-Themes Stockholm Core stockholm-core allows Stored XSS.This issue affects Stockholm Core: from n/a through <= 2.4.6. | ||||
| CVE-2025-68072 | 2 Merv Barrett, Wordpress | 2 Easy Property Listings, Wordpress | 2026-04-15 | 6.5 Medium |
| Missing Authorization vulnerability in Merv Barrett Easy Property Listings easy-property-listings allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Easy Property Listings: from n/a through <= 3.5.20. | ||||
| CVE-2025-68050 | 2 Leadpages, Wordpress | 2 Leadpages, Wordpress | 2026-04-15 | 6.5 Medium |
| Missing Authorization vulnerability in Leadpages Leadpages leadpages allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Leadpages: from n/a through <= 1.1.3. | ||||
| CVE-2025-68048 | 2 Wordpress, Xlplugins | 2 Wordpress, Nextmove | 2026-04-15 | 7.5 High |
| Missing Authorization vulnerability in XLPlugins NextMove Lite woo-thank-you-page-nextmove-lite allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects NextMove Lite: from n/a through <= 2.23.0. | ||||
| CVE-2025-68043 | 2 Lottiefiles, Wordpress | 2 Lottiefiles, Wordpress | 2026-04-15 | 7.3 High |
| Missing Authorization vulnerability in LottieFiles LottieFiles lottiefiles allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects LottieFiles: from n/a through <= 3.0.0. | ||||
| CVE-2025-68042 | 2 Travelpayouts, Wordpress | 2 Travelpayouts, Wordpress | 2026-04-15 | 6.5 Medium |
| Missing Authorization vulnerability in Travelpayouts Travelpayouts travelpayouts allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Travelpayouts: from n/a through <= 1.2.2. | ||||
| CVE-2025-68041 | 2 Codisto, Wordpress | 2 Omnichannel For Woocommerce, Wordpress | 2026-04-15 | 7.1 High |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in codisto Omnichannel for WooCommerce codistoconnect allows Stored XSS.This issue affects Omnichannel for WooCommerce: from n/a through <= 1.3.65. | ||||
| CVE-2025-68037 | 2 Atlasgondal, Wordpress | 2 Export Media Urls, Wordpress | 2026-04-15 | 7.1 High |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Atlas Gondal Export Media URLs export-media-urls allows Reflected XSS.This issue affects Export Media URLs: from n/a through <= 2.2. | ||||
| CVE-2025-66238 | 1 Sunbirddcim | 2 Dctrack, Power Iq | 2026-04-15 | 7.2 High |
| DCIM dcTrack allows an attacker to misuse certain remote access features. An authenticated user with access to the appliance's virtual console could exploit these features to redirect network traffic, potentially accessing restricted services or data on the host machine. | ||||
| CVE-2025-66271 | 2 Elecom, Microsoft | 2 Clone For Windows, Windows | 2026-04-15 | N/A |
| Clone for Windows provided by ELECOM CO.,LTD. registers a Windows service with an unquoted file path. A user with the write permission on the root directory of the system drive may execute arbitrary code with SYSTEM privilege. | ||||
| CVE-2025-66406 | 1 Smallstep | 1 Certificates | 2026-04-15 | 5 Medium |
| Step CA is an online certificate authority for secure, automated certificate management for DevOps. Prior to 0.29.0, there is an improper authorization check for SSH certificate revocation. This affects deployments configured with the SSHPOP provisioner. This vulnerability is fixed in 0.29.0. | ||||
| CVE-2025-66431 | 1 Plesk | 1 Plesk | 2026-04-15 | 7.8 High |
| WebPros Plesk before 18.0.73.5 and 18.0.74 before 18.0.74.2 on Linux allows remote authenticated users to execute arbitrary code as root via domain creation. The attacker needs "Create and manage sites" with "Domains management" and "Subdomains management." | ||||