Export limit exceeded: 366398 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (366398 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: sh-sci: fix RSCI FIFO overrun handling The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-48989 | 1 Boschrexrothag | 1 Indradrive Fwa Indrv Mp | 2026-04-15 | 7.5 High |
| A vulnerability in the PROFINET stack implementation of the IndraDrive (all versions) of Bosch Rexroth allows an attacker to cause a denial of service, rendering the device unresponsive by sending arbitrary UDP messages. | ||||
| CVE-2025-8341 | 1 Grafana | 2 Grafana, Infinity Datasource | 2026-04-15 | 5 Medium |
| Grafana is an open-source platform for monitoring and observability. The Infinity datasource plugin, maintained by Grafana Labs, allows visualizing data from JSON, CSV, XML, GraphQL, and HTML endpoints. If the plugin was configured to allow only certain URLs, an attacker could bypass this restriction using a specially crafted URL. This vulnerability is fixed in version 3.4.1. | ||||
| CVE-2025-48959 | 2026-04-15 | N/A | ||
| Local privilege escalation due to insecure file permissions. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 40077. | ||||
| CVE-2025-54564 | 1 Chargepoint | 1 Home Flex | 2026-04-15 | 7.8 High |
| uploadsm in ChargePoint Home Flex 5.5.4.13 does not validate a user-controlled string for bz2 decompression, which allows command execution as the nobody user. | ||||
| CVE-2025-48963 | 1 Acronis | 1 Cyber Protect Cloud Agent | 2026-04-15 | N/A |
| Local privilege escalation due to improper soft link handling. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux, macOS, Windows) before build 40296. | ||||
| CVE-2025-23257 | 1 Nvidia | 1 Doca | 2026-04-15 | 7.3 High |
| NVIDIA DOCA contains a vulnerability in the collectx-clxapidev Debian package that could allow an actor with low privileges to escalate privileges. A successful exploit of this vulnerability might lead to escalation of privileges. | ||||
| CVE-2025-53507 | 2026-04-15 | N/A | ||
| Multiple products provided by iND Co.,Ltd contain an insecure storage of sensitive information vulnerability. If exploited, configuration information, such as admin password, may be disclosed. As for the details of affected product names and versions, refer to the information under [Product Status]. | ||||
| CVE-2024-50955 | 1 Xinje | 1 Xd5e-24r-e Firmware | 2026-04-15 | 7.5 High |
| An issue in how XINJE XD5E-24R and XL5E-16T v3.5.3b handles TCP protocol messages allows attackers to cause a Denial of Service (DoS) via a crafted TCP message. | ||||
| CVE-2025-48978 | 1 Ui | 1 Edgeswitch | 2026-04-15 | 7.5 High |
| An Improper Input Validation in EdgeMAX EdgeSwitch (Version 1.11.0 and earlier) could allow a Command Injection by a malicious actor with access to EdgeSwitch adjacent network. Affected Products: EdgeMAX EdgeSwitch (Version 1.11.0 and earlier) Mitigation: Update the EdgeMAX EdgeSwitch to Version 1.11.1 or later. | ||||
| CVE-2024-5872 | 2026-04-15 | 6.5 Medium | ||
| On affected platforms running Arista EOS, a specially crafted packet with incorrect VLAN tag might be copied to CPU, which may cause incorrect control plane behavior related to the packet, such as route flaps, multicast routes learnt, etc. | ||||
| CVE-2025-40246 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix out of bounds memory read error in symlink repair xfs/286 produced this report on my test fleet: ================================================================== BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110 Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184): memcpy_orig+0x54/0x110 xrep_symlink_salvage_inline+0xb3/0xf0 [xfs] xrep_symlink_salvage+0x100/0x110 [xfs] xrep_symlink+0x2e/0x80 [xfs] xrep_attempt+0x61/0x1f0 [xfs] xfs_scrub_metadata+0x34f/0x5c0 [xfs] xfs_ioc_scrubv_metadata+0x387/0x560 [xfs] xfs_file_ioctl+0xe23/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128 allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago): xfs_init_local_fork+0x79/0xe0 [xfs] xfs_iformat_local+0xa4/0x170 [xfs] xfs_iformat_data_fork+0x148/0x180 [xfs] xfs_inode_from_disk+0x2cd/0x480 [xfs] xfs_iget+0x450/0xd60 [xfs] xfs_bulkstat_one_int+0x6b/0x510 [xfs] xfs_bulkstat_iwalk+0x1e/0x30 [xfs] xfs_iwalk_ag_recs+0xdf/0x150 [xfs] xfs_iwalk_run_callbacks+0xb9/0x190 [xfs] xfs_iwalk_ag+0x1dc/0x2f0 [xfs] xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs] xfs_iwalk+0xa4/0xd0 [xfs] xfs_bulkstat+0xfa/0x170 [xfs] xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs] xfs_file_ioctl+0xbf2/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014 ================================================================== On further analysis, I realized that the second parameter to min() is not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data buffer. if_bytes can be smaller than the data fork size because: (a) the forkoff code tries to keep the data area as large as possible (b) for symbolic links, if_bytes is the ondisk file size + 1 (c) forkoff is always a multiple of 8. Case in point: for a single-byte symlink target, forkoff will be 8 but the buffer will only be 2 bytes long. In other words, the logic here is wrong and we walk off the end of the incore buffer. Fix that. | ||||
| CVE-2025-48979 | 2026-04-15 | 3.4 Low | ||
| An Improper Input Validation in UISP Application could allow a Command Injection by a malicious actor with High Privileges and local access. | ||||
| CVE-2025-48980 | 1 Brave | 3 Brave, Brave Browser, Browser | 2026-04-15 | N/A |
| In Brave Browser Desktop versions prior to 1.83.10 that have the split view feature enabled, the "Open Link in Split View" context menu item did not respect the SameSite cookie attribute. Therefore SameSite=Strict cookies would be sent on a cross-site navigation using this method. | ||||
| CVE-2024-6662 | 1 Jan Syski | 1 Megabip | 2026-04-15 | N/A |
| Websites managed by MegaBIP in versions below 5.15 are vulnerable to Cross-Site Request Forgery (CSRF) as the form available under "/edytor/index.php?id=7,7,0" lacks protection mechanisms. A user could be tricked into visiting a malicious website, which would send POST request to this endpoint. If the victim is a logged in administrator, this could lead to creation of new accounts and granting of administrative permissions. | ||||
| CVE-2025-54568 | 2026-04-15 | 3.7 Low | ||
| Akamai Rate Control alpha before 2025 allows attackers to send requests above the stipulated thresholds because the rate is measured separately for each edge node. | ||||
| CVE-2025-48981 | 1 Compugroup Medical | 1 Cgm Medico | 2026-04-15 | 8.6 High |
| An insecure implementation of the proprietary protocol DNET in Product CGM MEDICO allows attackers within the intranet to eavesdrop and manipulate data on the protocol because encryption is optional for this connection. | ||||
| CVE-2025-54569 | 1 Malwarebytes | 1 Binisoft Windows Firewall Control | 2026-04-15 | 4.5 Medium |
| In Malwarebytes Binisoft Windows Firewall Control before 6.16.0.0, the installer is vulnerable to local privilege escalation. | ||||
| CVE-2025-51540 | 2026-04-15 | 5.3 Medium | ||
| EzGED3 3.5.0 stores user passwords using an insecure hashing scheme: md5(md5(password)). This hashing method is cryptographically weak and allows attackers to perform efficient offline brute-force attacks if password hashes are disclosed. The lack of salting and use of a fast, outdated algorithm makes it feasible to recover plaintext credentials using precomputed tables or GPU-based cracking tools. The vendor states that the issue is fixed in 3.5.72.27183. | ||||
| CVE-2024-6880 | 1 Jan Syski | 1 Megabip | 2026-04-15 | N/A |
| During MegaBIP installation process, a user is encouraged to change a default path to administrative portal, as keeping it secret is listed by the author as one of the protection mechanisms. Publicly available source code of "/registered.php" discloses that path, allowing an attacker to attempt further attacks. This issue affects MegaBIP software versions below 5.15 | ||||