Export limit exceeded: 40287 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (40287 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46277 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/zone_device: do not touch device folio after calling ->folio_free() The contents of a device folio can immediately change after calling ->folio_free(), as the folio may be reallocated by a driver with a different order. Instead of touching the folio again to extract the pgmap, use the local stack variable when calling percpu_ref_put_many(). | ||||
| CVE-2026-46275 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities. | ||||
| CVE-2026-47210 | 1 Patriksimek | 1 Vm2 | 2026-06-13 | 9.8 Critical |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, a sandbox escape vulnerability in vm2 allows arbitrary code execution in the host process when untrusted code is executed with async support on runtimes exposing WebAssembly JSPI (WebAssembly.promising / WebAssembly.Suspending). In the tested configuration, a JSPI-backed Promise can reach Promise.prototype.finally() in a way that bypasses the expected Promise-species hardening and exposes a host-originated rejection object to attacker-controlled species logic, breaking the sandbox boundary. This issue has been patched in version 3.11.4. | ||||
| CVE-2026-44492 | 1 Axios | 1 Axios | 2026-06-13 | 8.6 High |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios does not normalise IPv4-mapped IPv6 addresses. When NO_PROXY lists an IPv4 address such as 127.0.0.1 or 169.254.169.254, a request URL using the IPv4-mapped IPv6 form (::ffff:7f00:1, ::ffff:a9fe:a9fe) still routes through the configured proxy. Node.js resolves these addresses to the underlying IPv4 host, so the request reaches the internal service via the proxy rather than being blocked. This vulnerability is fixed in 0.32.0 and 1.16.0. | ||||
| CVE-2026-44486 | 1 Axios | 1 Axios | 2026-06-13 | 7.5 High |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios’ Node.js HTTP adapter can leak proxy credentials to a redirect target in affected versions. When a request is sent through an authenticated proxy, Axios may add a Proxy-Authorization header. If Axios then follows a redirect and the redirected request is no longer sent through that proxy, the stale Proxy-Authorization header can remain on the redirected request and be sent to the redirect target. This affects Node.js's use of Axios with automatic redirects enabled and an authenticated proxy configuration. Browser adapters are not affected. This vulnerability is fixed in 0.32.0 and 1.16.0. | ||||
| CVE-2025-10101 | 2 Apple, Avast | 2 Macos, Antivirus | 2026-06-12 | 7.8 High |
| Heap buffer out-of-bounds read vulnerability in Avast Antivirus when scanning a malformed Mach-O file may allow Local Execution of Code or Denial-of-Service of the antivirus process. This issue affects Avast Antivirus, AVG Antivirus, Norton Antivirus, Avast One, and Avast Business Antivirus on Windows, macOS, and Linux for virus definition builds before VPS 25090300. The affected scanning logic is delivered through a shared Gen Digital virus definition update stream. The same stream feeds the consumer antivirus products listed in this advisory and other Gen Digital products that embed the same engine. Mitigation flows through this update channel; installations at or above the listed build are not vulnerable regardless of which product consumes the stream. | ||||
| CVE-2025-8351 | 2 Apple, Avast | 2 Macos, Antivirus | 2026-06-12 | 7.8 High |
| Heap-based Buffer Overflow, Out-of-bounds Read vulnerability in Avira Antivirus engine when scanning a malformed file may allow Local Execution of Code or Denial-of-Service of the antivirus engine process. This issue affects Avira Antivirus on Windows, macOS, and Linux for engine builds before 8.3.70.98. | ||||
| CVE-2026-11816 | 1 Keras-team | 1 Keras | 2026-06-12 | 8.1 High |
| Keras versions prior to 3.14.0 are vulnerable to a path traversal issue in the archive extraction utilities located in `keras/src/utils/file_utils.py`. The functions `filter_safe_tarinfos()` and `filter_safe_zipinfos()` validate archive member paths against the process current working directory (CWD) instead of the actual extraction destination. When the process runs with CWD set to `/`, which is common in Docker containers, CI/CD runners, and Jupyter environments, the validation boundary becomes the filesystem root, allowing traversal paths to bypass the security check. Additionally, the zip filter contains a bug that causes an `AttributeError` when a blocked entry is encountered, leading to incomplete extraction. Furthermore, Python 3.11 installations lack the `filter="data"` safety net, leaving them entirely reliant on the flawed CWD-based filter. Exploitation of this vulnerability can result in arbitrary file writes outside the intended extraction directory, enabling attackers to overwrite configuration files, inject malicious code, or corrupt machine learning datasets and pipelines. | ||||
| CVE-2026-44487 | 1 Axios | 1 Axios | 2026-06-12 | 7.5 High |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios’s Node.js HTTP adapter may forward a Proxy-Authorization header to a redirected origin during specific proxy-to-direct redirect flows. This affects Node.js usage, where an initial HTTP request is sent through an authenticated HTTP proxy, redirects are followed, and the redirected URL is no longer proxied. Under affected redirect shapes, the final origin can receive the proxy credential that was intended only for the outbound proxy. This vulnerability is fixed in 0.32.0 and 1.16.0. | ||||
| CVE-2026-44488 | 1 Axios | 1 Axios | 2026-06-12 | 7.5 High |
| Axios is a promise based HTTP client for the browser and Node.js. Axios versions 1.7.0 through 1.15.x did not enforce configured request and response size limits when requests were sent with the fetch adapter. Applications that selected adapter: 'fetch', or ran in environments where axios resolved to the fetch adapter, could receive or send bodies larger than maxContentLength or maxBodyLength despite those limits being explicitly configured. This can cause resource exhaustion in server-side usage when a malicious or compromised server returns an oversized response, when an attacker can supply a large data: URL, or when an application forwards attacker-controlled request bodies through axios while relying on maxBodyLength as a boundary. This vulnerability is fixed in 0.32.0 and 1.16.0. | ||||
| CVE-2026-44494 | 1 Axios | 1 Axios | 2026-06-12 | 8.7 High |
| Axios is a promise based HTTP client for the browser and Node.js. From 1.0.0 to before 1.16.0, the Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution in the application's dependency tree to be escalated into a full Man-in-the-Middle (MITM) attack — intercepting, reading, and modifying all HTTP traffic including authentication credentials. The HTTP adapter at lib/adapters/http.js:670 reads config.proxy via standard property access, which traverses the prototype chain. Because proxy is not present in Axios defaults, the merged config object has no own proxy property, making it trivially injectable via prototype pollution. Once injected, setProxy() routes all HTTP requests through the attacker's proxy server. This vulnerability is fixed in 1.16.0. | ||||
| CVE-2026-44496 | 1 Axios | 1 Axios | 2026-06-12 | 7.5 High |
| Axios is a promise based HTTP client for the browser and Node.js. Axios versions before 0.32.0 on the 0.x line and before 1.16.0 on the 1.x line build a regular expression from the configured XSRF cookie name without escaping regex metacharacters. In standard browser environments, an attacker who can influence the cookie name passed to axios can cause expensive regex backtracking while axios reads document.cookie. The practical impact is client-side availability degradation, such as freezing the affected browser tab while axios prepares a request. The issue does not affect ordinary Node.js HTTP adapter usage, React Native, or web workers, where axios does not read document.cookie. This vulnerability is fixed in 0.32.0 and 1.16.0. | ||||
| CVE-2026-45484 | 1 Microsoft | 3 Sharepoint Server, Sharepoint Server 2016, Sharepoint Server 2019 | 2026-06-12 | 8.8 High |
| Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to elevate privileges over a network. | ||||
| CVE-2023-45583 | 1 Fortinet | 4 Fortios, Fortipam, Fortiproxy and 1 more | 2026-06-12 | 6.5 Medium |
| A use of externally-controlled format string vulnerability in Fortinet FortiOS 7.4.0, FortiOS 7.2.0 through 7.2.5, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiOS 6.2 all versions, FortiOS 6.0.0 through 6.0.16, FortiPAM 1.1.0, FortiPAM 1.0 all versions, FortiProxy 7.2.0 through 7.2.5, FortiProxy 7.0.0 through 7.0.11, FortiProxy 2.0 all versions, FortiProxy 1.2 all versions, FortiProxy 1.1 all versions, FortiProxy 1.0 all versions, FortiSwitchManager 7.2.0 through 7.2.2, FortiSwitchManager 7.0.0 through 7.0.2 allows attacker to execute unauthorized code or commands via specially crafted cli commands and http requests. | ||||
| CVE-2023-36640 | 1 Fortinet | 4 Fortios, Fortipam, Fortiproxy and 1 more | 2026-06-12 | 6.5 Medium |
| A use of externally-controlled format string vulnerability in Fortinet FortiOS 7.4.0, FortiOS 7.2.0 through 7.2.5, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiOS 6.2 all versions, FortiOS 6.0.0 through 6.0.16, FortiPAM 1.1.0, FortiPAM 1.0 all versions, FortiProxy 7.2.0 through 7.2.5, FortiProxy 7.0.0 through 7.0.11, FortiProxy 2.0 all versions, FortiProxy 1.2 all versions, FortiProxy 1.1 all versions, FortiProxy 1.0 all versions allows attacker to execute unauthorized code or commands via specially crafted commands | ||||
| CVE-2026-53435 | 2 Jenkins, Jenkins Project | 2 Jenkins, Jenkins | 2026-06-12 | 8.8 High |
| In Jenkins 2.567 and earlier, LTS 2.555.2 and earlier, it is possible for attackers to have Jenkins deserialize arbitrary types defined in Jenkins core or plugins from an attacker-controlled `config.xml` submission in a way that allows them to handle HTTP requests afterwards. This can be used to impersonate any user and send HTTP requests on their behalf, up to and including use of the Script Console to run arbitrary code, or to read arbitrary files from the Jenkins controller. | ||||
| CVE-2023-34576 | 1 Store-opart | 1 Op\'art Product Faq | 2026-06-12 | 9.8 Critical |
| SQL injection vulnerability in updatepos.php in PrestaShop opartfaq through 1.0.3 allows remote attackers to run arbitrary SQL commands via unspedified vector. | ||||
| CVE-2021-39913 | 1 Gitlab | 1 Gitlab | 2026-06-12 | 4.4 Medium |
| Accidental logging of system root password in the migration log in all versions of GitLab CE/EE before 14.2.6, all versions starting from 14.3 before 14.3.4, and all versions starting from 14.4 before 14.4.1 allows an attacker with local file system access to obtain system root-level privileges | ||||
| CVE-2021-39911 | 1 Gitlab | 1 Gitlab | 2026-06-12 | 1.7 Low |
| An improper access control flaw in all versions of GitLab CE/EE starting from 13.9 before 14.2.6, all versions starting from 14.3 before 14.3.4, and all versions starting from 14.4 before 14.4.1 exposes private email address of Issue and Merge Requests assignee to Webhook data consumers | ||||
| CVE-2021-39904 | 1 Gitlab | 1 Gitlab | 2026-06-12 | 4.3 Medium |
| An Improper Access Control vulnerability in the GraphQL API in all versions of GitLab CE/EE starting from 13.1 before 14.2.6, all versions starting from 14.3 before 14.3.4, and all versions starting from 14.4 before 14.4.1 allows a Merge Request creator to resolve discussions and apply suggestions after a project owner has locked the Merge Request | ||||