Export limit exceeded: 366014 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (366014 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80664 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_nat: reject unsupported target families xt_nat SNAT and DNAT target handlers assume IP-family conntrack state is present and can dereference a NULL pointer when instantiated from an unsupported family through nft_compat. A bridge-family compat rule can therefore trigger a NULL-dereference in nf_nat_setup_info(). Reject non-IP families in xt_nat_checkentry() so unsupported targets cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT compat users and leave the runtime fast path unchanged. [ The crash was fixed via 9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"), so this patch is no longer critical. Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra family check is a good idea in any case. ] | ||||
| CVE-2026-80670 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf tools: Use perf_env__get_cpu_topology() in machine__resolve() machine__resolve() accesses env->cpu[al->cpu].socket_id after checking al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu against env->nr_cpus_avail. Since al->cpu comes from the untrusted perf.data sample, a crafted file with a large CPU index causes an out-of-bounds heap read. Use perf_env__get_cpu_topology() which validates both NULL and bounds. Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t): without this, values like 65536 silently truncate to 0, bypassing the accessor's internal check and returning CPU 0's topology. | ||||
| CVE-2026-80671 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf sched: Fix register_pid() overflow, strcpy, and BUG_ON register_pid() has several issues when processing untrusted perf.data: 1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap to a small value on 32-bit systems when pid is large (e.g. 0x40000000), causing realloc to return a tiny buffer followed by out-of-bounds writes in the initialization loop. 2. Heap buffer overflow: strcpy(task->comm, comm) copies the untrusted comm string into a fixed 20-byte COMM_LEN buffer with no length check. 3. BUG_ON on allocation failure: perf.data is untrusted input, so allocation failures should be handled gracefully rather than killing the process. 4. Realloc of sched->tasks assigned directly back, leaking the old pointer on failure; nr_tasks incremented before the realloc, leaving corrupted state on failure. Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum on 64-bit), replace strcpy with strlcpy, guard against NULL comm, replace BUG_ON with NULL returns using safe realloc patterns, and add NULL checks in callers that dereference the result. | ||||
| CVE-2026-80672 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix u16 truncation of restart-area length check ntfs_check_restart_area() validates that the $LogFile restart area and its trailing log client record array fit within the system page size: u16 ra_ofs, ra_len, ca_ofs; ... ra_len = ca_ofs + le16_to_cpu(ra->log_clients) * sizeof(struct log_client_record); if (ra_ofs + ra_len > le32_to_cpu(rp->system_page_size) || ...) return false; ra_len is u16, but the right-hand side is computed in size_t (sizeof(struct log_client_record) == 160). Both ca_ofs and log_clients come straight from the on-disk restart area. With an on-disk log_clients of 410 the product 410 * 160 = 65600; adding ca_ofs and storing into the u16 ra_len truncates modulo 65536 (e.g. ca_ofs 64 gives ra_len 128), so the "fits in the page" check passes even though the client array described by log_clients extends far beyond the page. ntfs_check_log_client_array() then walks the array bounded only by the on-disk log_clients count: cr = ca + idx; if (cr->prev_client != LOGFILE_NO_CLIENT) ... For log_clients 410 it dereferences records up to ca + 409 * 160, ~64 KiB past the kvzalloc(system_page_size) restart-page buffer -- an out-of-bounds read of attacker-controlled extent, reachable when a crafted NTFS image is mounted (load_and_check_logfile() at mount time). This is the in-kernel analogue of CVE-2022-30789, fixed in the ntfs-3g userspace driver but never in this revived classic driver. Compute the restart-area length in a u32 so the existing bounds check rejects an over-large client array instead of being defeated by the truncation. Widen ra_ofs and ca_ofs to u32 as well: both are loaded from __le16 on-disk fields and every comparison already promotes to int/size_t, so this changes no result and keeps the declaration uniform. | ||||
| CVE-2026-80674 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate resident attribute lists and harden the validator A base inode's $ATTRIBUTE_LIST is sanity-checked by load_attribute_list() only on the non-resident path; ntfs_read_locked_inode() copies a *resident* attribute list into ni->attr_list with a plain memcpy() and no validation at all. Every subsequent walk of ni->attr_list -- ntfs_external_attr_find(), ntfs_inode_attach_all_extents() and ntfs_attrlist_need() -- then trusts the entries are well-formed and reads attr_list_entry fixed-header fields (lowest_vcn at offset 8, mft_reference at offset 16, and the name) with bounds that assume validation already happened. A crafted resident attribute list therefore reaches those walks unvalidated and can drive out-of-bounds reads of the attribute-list buffer. load_attribute_list() itself reads ale->name_offset (offset 7), ale->mft_reference (offset 16) and the name length under only an "al < al_start + size" bound, so its own validation loop can over-read the fixed header of a truncated trailing entry by a few bytes. Factor the per-entry validation into ntfs_attr_list_entry_is_valid(), which requires each entry's fixed header (offsetof(struct attr_list_entry, name)) to be in range before any field is dereferenced, that ale->length is a multiple of 8 covering the fixed header plus the name, and that the entry is in use and carries a live MFT reference. ntfs_attr_list_is_valid() walks the buffer with it and checks the entries tile it exactly. Use the list validator in load_attribute_list() (replacing the open-coded loop, closing its own over-read) and on the resident path in ntfs_read_locked_inode() (which previously skipped validation entirely); patches 2/3 reuse the per-entry helper at the other two attribute-list walks. | ||||
| CVE-2026-80676 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] | ||||
| CVE-2026-80677 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: driver core: use READ_ONCE() for dev->driver in dev_has_sync_state() dev_has_sync_state() reads dev->driver twice without holding device_lock() -- once for the NULL check and once to dereference ->sync_state. Some callers only hold device_links_write_lock, which doesn't prevent a concurrent unbind from clearing dev->driver via device_unbind_cleanup(). Fix it by reading dev->driver exactly once with READ_ONCE(), pairing with the WRITE_ONCE() in device_set_driver(). | ||||
| CVE-2026-80679 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential NULL pointer dereference dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator. | ||||
| CVE-2026-80680 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: amd-mp2: Unregister callback on adapter add failure amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI driver's callback table before the adapter is registered. If i2c_add_adapter() fails, probe returns and devres frees the context, but the PCI driver can still dereference the stale pointer from its IRQ and system-sleep callbacks. Unregister the callback before returning the adapter registration error. | ||||
| CVE-2026-80685 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/util: don't read __page_2 for order-1 folios in snapshot_page() snapshot_page() currently reads __page_2 after checking nr_pages > 1, but it should only do so when nr_pages > 2. If an order-1 folio is allocated at the end of a vmemmap section, __page_2 will not exist and reading it will cause a fault. During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed on the page isolation path while reading an order-1 folio's __page_2 from an adjacent absent section (unmapped vmemmap). Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap hole). | ||||
| CVE-2026-80686 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE pte_pfn() and pte_dirty() have undefined behaviour when called on a non-present PTE. In migrate_vma_collect_pmd(), these functions may be invoked on non-present entries (e.g., device-private entries), leading to potential crashes from pte_pfn() or incorrect dirty folio accounting from pte_dirty(). Fix both by guarding with pte_present() checks. | ||||
| CVE-2026-80687 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommufd/viommu: Release the igroup lock on the vdevice_size error path iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the driver's vdevice_size against the core structure size with a WARN_ON_ONCE. On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it skips the mutex_unlock(), leaving the igroup lock held and deadlocking the next vDEVICE operation on that group. Jump to out_unlock_igroup instead. | ||||
| CVE-2026-80601 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: gw: acquire ethernet header only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. | ||||
| CVE-2026-80602 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/lbr: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET entries for which the branch-from addresses are in the kernel. E.g. $ perf record -e cycles -o - -j any,save_type,u -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff81001268/0x717a90a38f1a/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a39157/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a2c628/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a41b60/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8bef1c30/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8e4d3c90/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH ... The reason is that the hardware filter only considers the privilege level applicable to the branch target. Extend software filtering to also validate the branch-from addresses against br_sel, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested. | ||||
| CVE-2026-80603 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read parse_dcc() treats data_end as an inclusive end pointer, but its only caller passes data_limit = ib_ptr + datalen, which points one past the last valid byte. The newline search loop iterates while tmp <= data_end, so when no newline is present, *tmp is read at tmp == data_end, one byte beyond the region filled by skb_header_pointer(). irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte is uninitialized or stale; if it contains an ASCII digit, simple_strtoul will consume it and produce a wrong DCC IP or port in the conntrack expectation. The extra allocation byte is also a fragile guard: if the cap or allocation size changes, this becomes a real out-of-bounds read. Change the loop and its post-loop check to use strict less-than, consistent with the caller's exclusive-end convention. Update the function comment accordingly. | ||||
| CVE-2026-80607 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg Sashiko found that user can cause this WARN_ON_ONCE() easily with adding a kprobe event based on a raw address with BTF parameter. Since this is not an unexpected condition, remove the WARN_ON_ONCE(). | ||||
| CVE-2026-80609 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: qede: fix out-of-bounds check for cqe->len_list[] Move index check before element access. | ||||
| CVE-2026-80610 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix potential divide-by-zero when num_vsi is zero For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so pf->caps.num_vsi is zero. This leads to a divide-by-zero in enetc4_default_rings_allocation() when distributing rings among PF and VFs. Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV instructions silently return zero rather than raising an exception, so the issue does not cause a visible crash. However, relying on this behavior is incorrect and poses a cross-platform compatibility risk. Add an explicit check for num_vsi == 0 and return early after the PF's rings have been configured. | ||||
| CVE-2026-80611 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Mark LPI enter functions as __cpuidle When function tracing or Kprobes is enabled, entering an ACPI Low Power Idle (LPI) state triggers the following RCU splat: RCU not on for: acpi_idle_lpi_enter+0x4/0xd8 WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228 The acpi_idle_lpi_enter() function is invoked within the cpuidle path after RCU has already been disabled for the current local CPU. Consequently, ftrace's function_trace_call() expects RCU to be actively watching before recording trace data, emitting a warning if it is not. Fix this by annotating acpi_idle_lpi_enter(), the generic __weak stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter() with __cpuidle. This moves these functions into the '.cpuidle.text' section, implicitly disabling ftrace instrumentation (notrace) along this sensitive path and preventing trace-induced RCU warnings during idle entry. | ||||
| CVE-2026-80621 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability dwc_pcie_rasdes_debugfs_init() returns success when the controller has no RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which dereferences rasdes_info unconditionally. Return early when no RAS DES state was allocated. In that case no RAS DES mutex was initialized, so there is nothing to destroy. [mani: reworded subject] | ||||