Export limit exceeded: 373628 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (373628 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80984 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: do not dereference an unset send buffer on the SMC-D teardown path smc_close_stream_wait() calls smc_tx_prepared_sends() from inside its sk_wait_event() condition, and sk_wait_event() evaluates that condition once with the socket lock released. smcd_buf_detach() clears conn->sndbuf_desc from smc_conn_kill() under lock_sock(), so a link group terminating while a socket waits there leaves the helper dereferencing NULL, faulting out of close(). SIOCOUTQ reads the field by hand, and smc_close_cancel_work() drops the lock across two cancel_*_sync() calls. Sample the pointer once in the helper, report nothing prepared while it is unset, and bound the ioctl the same way. The receive tasklet dereferences the field directly in smc_cdc_msg_recv_action(), not through this helper; 1/2 is what keeps it from running that late. | ||||
| CVE-2026-80983 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket refcount leak in smc_switch_conns() smc_switch_conns() takes a reference on the SMC socket before dropping lgr->conns_lock, so the connection stays alive while the CDC slot is fetched: sock_hold(&smc->sk); read_unlock_bh(&lgr->conns_lock); /* pre-fetch buffer outside of send_lock, might sleep */ rc = smc_cdc_get_free_slot(conn, to_lnk, &wr_buf, NULL, &pend); if (rc) goto err_out; The err_out label only drops the wr_tx link reference, so this early exit returns without the matching sock_put(). The second error exit is not affected, because sock_put() has already run by then. A leaked sk_refcnt means the smc_sock is never destroyed. Its send and receive buffers stay allocated, and for a user socket the reference held on the network namespace is never released, so the netns can no longer be torn down. smc_cdc_get_free_slot() fails when the target link goes down or when the connection has been killed while the switch is in progress. Both are reachable during the link failover this function implements, so the leak is triggered by the same hardware events that make smc_switch_conns() run in the first place. Restructure so there is a single sock_put() covering both outcomes, instead of adding a second one to the error path. | ||||
| CVE-2026-80982 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix use-after-free in smc_rx_pipe_buf_release() smc_rx_splice() hands RMB pages to a pipe and takes a socket reference per entry so the smc_sock stays alive until the reader finishes. The connection does not: a concurrent close runs smc_conn_free(), which releases the receive buffer back to the link group pool. smc_rx_pipe_buf_release() tests sk_state before taking the socket lock. The state can change between the test and the lock, and smc_rx_update_cons() then dereferences conn->rmb_desc and walks conn->lgr, which smc_conn_free() has already released. On the is_reg_err path smcr_buf_unuse() frees the descriptor outright, so this is a use-after-free. Take the socket lock first and test conn->freed instead. smc_conn_free() sets that flag before releasing anything, and every caller holds the socket lock. The two paths exclude each other: either the pipe release runs first with everything valid, or it sees the flag and skips the update. | ||||
| CVE-2026-80979 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: unregister the connection before draining the rx tasklet smc_conn_free() calls smc_ism_unset_conn() only while the link group is still on its device list, and never sets conn->killed. smc_lgr_terminate_sched() unlinks the group immediately and defers killing its connections to a work item, so a connection freed in that window keeps its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the device can re-arm the receive tasklet after tasklet_kill() has returned. On the DMB-nocopy path the ghost send buffer is freed right after that drain, so the re-armed tasklet dereferences it. Unregister unconditionally and drain before the detach at both teardown sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain. Clear conn->sndbuf_desc before freeing it as well, so a reader that samples the pointer cannot get one that is already freed. | ||||
| CVE-2026-80978 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: cap advertised IP tunnel headroom IP tunnel devices derive their advertised needed_headroom from lower output devices. A stack of user-created devices can make the derived value larger than the 16-bit skb header offsets can represent. Once IP output reserves it, skb head expansion can wrap those offsets. The runtime transmit path already caps a growing needed_headroom at 512. Apply the same cap when tunnel configuration publishes needed_headroom derived from a lower output device. Capping the advertised value is safe: IP tunnel transmit still expands the skb when a packet needs more headroom. A nonsensical stacked configuration can therefore incur an extra reallocation, but it cannot publish an unbounded reservation to upper layers. | ||||
| CVE-2026-80977 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't touch shared zerocopy state in skb_tx_error() skb_tx_error() completes the zerocopy uarg and clears SKBFL_ALL_ZEROCOPY, and skb_zcopy_downgrade_managed() clears SKBFL_MANAGED_FRAG_REFS. Both live in skb_shinfo(), which every clone shares, while the caller only owns the reference it is about to drop. Through a clone it tells the producer its pages are free and drops SKBFL_SHARED_FRAG for an skb that is still in flight. Open vSwitch reaches this with a non-last OVS_ACTION_ATTR_RECIRC: clone_execute() sends a skb_clone() into ovs_dp_process_packet() while do_execute_actions() keeps forwarding the original, and skb_clone() does not privatise the frags here -- skb_orphan_frags() returns early on SKBFL_DONT_ORPHAN. A flow miss on the clone then strips the marker from the packet still being forwarded, and a later local ESP delivery decrypts in place over frags it does not own privately. Skip it for a cloned skb. Nothing is lost: skb_release_data() clears the zerocopy state once the last reference to the shared data goes. | ||||
| CVE-2026-80976 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: seg6: reset IP6CB after IPv6 decapsulation decap_and_validate() pulls the outer SRv6 headers and makes the inner packet the skb network header. The IPv6 control block still contains values collected while parsing the outer packet, including nhoff and extension-header flags. End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6 input path. An unprivileged user can reach End.DT6 from a user and net namespace by installing a local SID and injecting an outer packet with Hop-by-Hop and Destination Options headers followed by an SRH and a minimal inner IPv6 packet. The outer extension headers leave a large nhoff in IP6CB. After decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the inner packet and reads beyond the skb head. KASAN reports: BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu ip6_protocol_deliver_rcu+0x1118/0x1450 ip6_input_finish+0x11b/0x240 seg6_local_input_core+0xed/0x2e0 lwtunnel_input+0x1e9/0x4e0 ipv6_rthdr_rcv+0x525f/0x6c50 ip6_protocol_deliver_rcu+0xcb7/0x1450 Before clearing IP6CB for an inner IPv6 packet, save its incoming interface index and L3 slave state. Restore both after the clear and set nhoff to the inner IPv6 base-header nexthdr field. Use IP6CB(skb)->iif rather than skb->skb_iif because VRF processing can replace skb_iif with the L3 master while IP6CB keeps the receiving interface. Preserve IP6SKB_L3SLAVE for the same reason. | ||||
| CVE-2026-80973 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: bound the MIDI event length from the device usb6fire_comm_receiver_handler() forwards a MIDI event using a length byte the device supplies, with no bound and no check that the transfer delivered that many bytes: if (!urb->status) { if (rt->receiver_buffer[0] == 0x10) /* midi in event */ if (midi_rt) midi_rt->in_received(midi_rt, rt->receiver_buffer + 2, rt->receiver_buffer[1]); } receiver_buffer is a 64-byte kzalloc() buffer (COMM_RECEIVER_BUFSIZE), so only 62 bytes follow the two-byte header. receiver_buffer[1] is a u8 the device chooses, so a device that answers with 0x10 and a length of 0xFF makes snd_rawmidi_receive() read 255 bytes starting two bytes into a 64-byte object. The bytes past the buffer are handed to userspace through the rawmidi read path. urb->actual_length is not consulted either, so a short transfer leaves both the type byte and the length byte at their previous values and the handler acts on stale data. The receiver URB is submitted from usb6fire_comm_init() at probe, so the read happens on plug with no user action; forwarding to userspace also needs a MIDI input substream open, since usb6fire_midi_in_received() only calls snd_rawmidi_receive() when rt->in is set. KASAN on 7.2.0-rc5 (arm64), single packet from an emulated device: BUG: KASAN: slab-out-of-bounds in snd_rawmidi_receive Read of size 255 at addr ffff000009f64682 by task bash/183 __asan_memcpy snd_rawmidi_receive usb6fire_midi_in_received [snd_usb_6fire] usb6fire_comm_receiver_handler [snd_usb_6fire] Allocated by task 11: usb6fire_comm_init [snd_usb_6fire] usb6fire_chip_probe [snd_usb_6fire] The buggy address is located 2 bytes inside of allocated 64-byte region [ffff000009f64680, ffff000009f646c0) Reject the event when the length exceeds the bytes that follow the header, and require the transfer to have delivered the header plus that many bytes. The receiver URB is submitted with a 64-byte transfer_buffer_length, so a genuine device cannot deliver an event longer than those 62 bytes and nothing valid is dropped. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-80972 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Check card index validity at probe aloop driver blindly trusts that the given devptr->id value is within the proper card index range at probe. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80971 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: clear the URB pointers on disconnect bcd2000_free_usb_related_resources() frees both URBs and leaves the pointers behind: usb_kill_urb(bcd2k->midi_out_urb); usb_kill_urb(bcd2k->midi_in_urb); usb_free_urb(bcd2k->midi_out_urb); usb_free_urb(bcd2k->midi_in_urb); The rawmidi device outlives that call. A substream that is still open when the device is unplugged reaches bcd2000_midi_send() from the trigger path on close. That function writes to the freed URB and then hands it to the USB core: bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE; ... ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC); usb_kill_urb() does not stop a later submission either, so a submit that races the disconnect can requeue the URB after it has been reaped. midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits it from the completion handler. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000] Write of size 4 at addr ffff00001827d388 by task bpoc/168 __asan_store4 bcd2000_midi_send [snd_bcd2000] bcd2000_midi_output_trigger [snd_bcd2000] snd_rawmidi_kernel_write1 close_substream.part.0 Freed by task 168: usb_free_urb bcd2000_disconnect [snd_bcd2000] BUG: KASAN: slab-use-after-free in usb_submit_urb Read of size 8 at addr ffff00001827d3b8 by task bpoc/168 Clear both pointers after freeing and test them on the paths that can still run. Poison the URBs before freeing them: usb_poison_urb() waits for a running completion handler and rejects any later submission, so after it returns the input path is quiesced and only the rawmidi trigger path can still reach bcd2000_midi_send(). No unpoison is needed; the URBs are freed on the next line. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-80970 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: do not copy out an uninitialised init response fcp_ioctl_init() allocates its response buffer with kmalloc() and copies the whole buffer back to userspace: buf_size = init.step0_resp_size + init.step2_resp_size; void *resp __free(kfree) = kmalloc(buf_size, GFP_KERNEL); ... if (copy_to_user(arg->resp, resp, buf_size)) return -EFAULT; Nothing clears the buffer, and the only writer of its leading step0_resp_size bytes is the step-0 control transfer: err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), FCP_USB_REQ_STEP0, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, 0, private->bInterfaceNumber, step0_resp, private->step0_resp_size); if (err < 0) return err; usb_fill_control_urb() does not set URB_SHORT_NOT_OK, so a short or zero-length data stage completes with status 0 and snd_usb_ctl_msg() returns a small actual_length. The only check is err < 0, so a short transfer is accepted as success. snd_usb_ctl_msg() copies the full size back unconditionally: buf = kmemdup(data, size, GFP_KERNEL); ... memcpy(data, buf, size); Bytes the device never wrote are therefore restored into resp unchanged and copied to userspace. step0_resp_size and step2_resp_size are each validated only to 1..255, so the caller also picks the slab cache, from kmalloc-8 up to kmalloc-512. On 7.2.0-rc5 (arm64), device answering step 0 with a zero-length data stage, s0 = s2 = 255: # init_on_alloc off, no spray step0 window [0,255): nonzero=94/255 000: 00 80 60 06 00 00 ff ff 18 00 00 00 57 01 ea 01 010: 08 78 22 13 00 00 ff ff a8 c4 5f 80 00 80 ff ff # same kernel, kmalloc-512 pre-seeded with an 8-byte tag step0 window [0,255): nonzero=219/255 tagbytes=232 # identical run, init_on_alloc=1 step0 window [0,255): nonzero=0/255 tagbytes=0 # all three runs step2 window [255,510): device words matched=62/62 a8 c4 5f 80 00 80 ff ff is the little-endian kernel text address ffff8000805fc4a8. The step-2 window is unaffected, so the disclosure is exactly the step-0 region. Zero the buffer, and require the step-0 transfer to deliver the full step0_resp_size bytes so a short data stage is reported as an error. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-80969 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mpu401: Check card index validity at probe mpu401 driver blindly trusts that the given devptr->id value is within the proper card index range at probe. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80968 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mts64: Check card index validity at probe Although mts64 driver has a check of the given devptr->id value, it doesn't check for a negative id, which is often given as "none" or such value when bound via sysfs. This may lead to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80967 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcxhr: initialize mutexes before requesting threaded IRQ pcxhr_probe() requests pcxhr_threaded_irq() before initializing mgr->lock, even though the threaded handler takes that mutex. Initialize the manager locks before request_threaded_irq() so an early interrupt cannot run against uninitialized mutex state during probe. | ||||
| CVE-2026-80966 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: portman2x4: Check card index validity at probe Although portman2x4 driver has a check of the given devptr->id value, it doesn't check for a negative id, which is often given as "none" or such value when bound via sysfs. This may lead to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80965 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: serial-u16550: Check card index validity at probe serial-u16550 driver blindly trusts that the given devptr->id value is within the proper card index range at probe. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80964 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virmidi: Check card index validity at probe virmidi driver blindly trusts that the given devptr->id value is within the proper card index range at probe. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80963 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-stats: fix a crash if allocation of per-cpu data fails If "dm_kvzalloc(percpu_alloc_size, cpu_to_node(cpu))" fails, the code jumps to the "out" label and calls dm_stat_free. dm_stat_free does "for_each_possible_cpu(cpu) { dm_kvfree(s->stat_percpu[cpu][0].histogram, s->histogram_alloc_size);", which crashes with NULL pointer dereference if s->stat_percpu[cpu] is NULL. This commit fixes the bug by testing s->stat_percpu[cpu] for NULL before using it. | ||||
| CVE-2026-80952 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix info leak and UAF in device unregister path i3c_master_unregister_i3c_devs() clears i3cdev->dev->desc before calling device_unregister(). During device_unregister(), device_del() emits a KOBJ_REMOVE uevent and unbinds the driver while the device descriptor is still expected to be valid. As a result, i3c_device_uevent() and a racing modalias_show() can observe a NULL desc and fall back to an uninitialized stack struct i3c_device_info, leaking kernel stack contents in the generated modalias. Driver .remove() callbacks may also encounter an unexpected NULL desc during unbind. Keep desc valid until device_unregister() has completed. Since device_unregister() drops the device reference and may free the device, take an extra reference with get_device() before unregistering. Clear desc afterwards and release the extra reference with put_device(). This preserves the release-time invariant that desc must be NULL while avoiding both the information leak and a potential use-after-free from writing desc after the device has been released. | ||||
| CVE-2026-80951 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: bound IBI payload to the requested max_payload_len svc_i3c_master_handle_ibi() reads the IBI payload from the RX FIFO into the IBI slot. The loop is bounded by the hardware FIFO size (SVC_I3C_FIFO_SIZE), not by the slot size. slot->data points into the IBI pool, which i3c_generic_ibi_alloc_pool() sizes at max_payload_len per slot. svc_i3c_master_request_ibi() only rejects a max_payload_len larger than SVC_I3C_FIFO_SIZE, so a driver can request a smaller one. mctp-i3c requests 1. Each readsb() then copies the controller RXCOUNT bytes (up to 31) with no check against the slot size. A device that sends more bytes than the slot holds writes past slot->data, an out-of-bounds write into the IBI pool. Bound the loop by dev->ibi->max_payload_len and clamp each read to the space left in the slot, the same way dw-i3c does. A device can still send more than the requested payload. Flush the leftover bytes from the RX FIFO so they do not leak into the next transfer. | ||||