Export limit exceeded: 37201 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 37201 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (37201 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31694 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: reject oversized dirents in page cache fuse_add_dirent_to_cache() computes a serialized dirent size from the server-controlled namelen field and copies the dirent into a single page-cache page. The existing logic only checks whether the dirent fits in the remaining space of the current page and advances to a fresh page if not. It never checks whether the dirent itself exceeds PAGE_SIZE. As a result, a malicious FUSE server can return a dirent with namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB page systems this causes memcpy() to overflow the cache page by 24 bytes into the following kernel page. Reject dirents that cannot fit in a single page before copying them into the readdir cache. | ||||
| CVE-2026-31685 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_eui64: reject invalid MAC header for all packets `eui64_mt6()` derives a modified EUI-64 from the Ethernet source address and compares it with the low 64 bits of the IPv6 source address. The existing guard only rejects an invalid MAC header when `par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()` can still reach `eth_hdr(skb)` even when the MAC header is not valid. Fix this by removing the `par->fragoff != 0` condition so that packets with an invalid MAC header are rejected before accessing `eth_hdr(skb)`. | ||||
| CVE-2026-31676 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: only handle RESPONSE during service challenge Only process RESPONSE packets while the service connection is still in RXRPC_CONN_SERVICE_CHALLENGING. Check that state under state_lock before running response verification and security initialization, then use a local secured flag to decide whether to queue the secured-connection work after the state transition. This keeps duplicate or late RESPONSE packets from re-running the setup path and removes the unlocked post-transition state test. | ||||
| CVE-2026-31673 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: read UNIX_DIAG_VFS data under unix_state_lock Exact UNIX diag lookups hold a reference to the socket, but not to u->path. Meanwhile, unix_release_sock() clears u->path under unix_state_lock() and drops the path reference after unlocking. Read the inode and device numbers for UNIX_DIAG_VFS while holding unix_state_lock(), then emit the netlink attribute after dropping the lock. This keeps the VFS data stable while the reply is being built. | ||||
| CVE-2026-31657 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: hold claim backbone gateways by reference batadv_bla_add_claim() can replace claim->backbone_gw and drop the old gateway's last reference while readers still follow the pointer. The netlink claim dump path dereferences claim->backbone_gw->orig and takes claim->backbone_gw->crc_lock without pinning the underlying backbone gateway. batadv_bla_check_claim() still has the same naked pointer access pattern. Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate on a stable gateway reference until the read-side work is complete. This keeps the dump and claim-check paths aligned with the lifetime rules introduced for the other BLA claim readers. | ||||
| CVE-2026-31656 | 1 Linux | 2 Kernel, Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat A use-after-free / refcount underflow is possible when the heartbeat worker and intel_engine_park_heartbeat() race to release the same engine->heartbeat.systole request. The heartbeat worker reads engine->heartbeat.systole and calls i915_request_put() on it when the request is complete, but clears the pointer in a separate, non-atomic step. Concurrently, a request retirement on another CPU can drop the engine wakeref to zero, triggering __engine_park() -> intel_engine_park_heartbeat(). If the heartbeat timer is pending at that point, cancel_delayed_work() returns true and intel_engine_park_heartbeat() reads the stale non-NULL systole pointer and calls i915_request_put() on it again, causing a refcount underflow: ``` <4> [487.221889] Workqueue: i915-unordered engine_retire [i915] <4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0 ... <4> [487.222707] Call Trace: <4> [487.222711] <TASK> <4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915] <4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915] <4> [487.223566] __engine_park+0xb9/0x650 [i915] <4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915] <4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915] <4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915] <4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915] <4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915] <4> [487.226178] i915_request_retire+0x1c/0x40 [i915] <4> [487.226625] engine_retire+0x122/0x180 [i915] <4> [487.227037] process_one_work+0x239/0x760 <4> [487.227060] worker_thread+0x200/0x3f0 <4> [487.227068] ? __pfx_worker_thread+0x10/0x10 <4> [487.227075] kthread+0x10d/0x150 <4> [487.227083] ? __pfx_kthread+0x10/0x10 <4> [487.227092] ret_from_fork+0x3d4/0x480 <4> [487.227099] ? __pfx_kthread+0x10/0x10 <4> [487.227107] ret_from_fork_asm+0x1a/0x30 <4> [487.227141] </TASK> ``` Fix this by replacing the non-atomic pointer read + separate clear with xchg() in both racing paths. xchg() is a single indivisible hardware instruction that atomically reads the old pointer and writes NULL. This guarantees only one of the two concurrent callers obtains the non-NULL pointer and performs the put, the other gets NULL and skips it. (cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42) | ||||
| CVE-2026-31637 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: reject undecryptable rxkad response tickets rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then parses the buffer as plaintext without checking whether crypto_skcipher_decrypt() succeeded. A malformed RESPONSE can therefore use a non-block-aligned ticket length, make the decrypt operation fail, and still drive the ticket parser with attacker-controlled bytes. Check the decrypt result and abort the connection with RXKADBADTICKET when ticket decryption fails. | ||||
| CVE-2026-31630 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte stack buffers with "%pISpc". That is too small for the longest current-tree IPv6-with-port form the formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50 visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50] buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example | ||||
| CVE-2026-31629 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: add missing return after LLCP_CLOSED checks In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket state is LLCP_CLOSED, the code correctly calls release_sock() and nfc_llcp_sock_put() but fails to return. Execution falls through to the remainder of the function, which calls release_sock() and nfc_llcp_sock_put() again. This results in a double release_sock() and a refcount underflow via double nfc_llcp_sock_put(), leading to a use-after-free. Add the missing return statements after the LLCP_CLOSED branches in both functions to prevent the fall-through. | ||||
| CVE-2026-31627 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: s3c24xx: check the size of the SMBUS message before using it The first byte of an i2c SMBUS message is the size, and it should be verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX before processing it. This is the same logic that was added in commit a6e04f05ce0b ("i2c: tegra: check msg length in SMBUS block read") to the i2c tegra driver. | ||||
| CVE-2026-31626 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify() Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent using uninitialized data. Smatch warns that only 6 bytes are copied to this 8-byte (u64) variable, leaving the last two bytes uninitialized: drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify() warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes) Initializing the variable at the start of the function fixes this warning and ensures predictable behavior. | ||||
| CVE-2026-31622 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFC: digital: Bounds check NFC-A cascade depth in SDD response handler The NFC-A anti-collision cascade in digital_in_recv_sdd_res() appends 3 or 4 bytes to target->nfcid1 on each round, but the number of cascade rounds is controlled entirely by the peer device. The peer sets the cascade tag in the SDD_RES (deciding 3 vs 4 bytes) and the cascade-incomplete bit in the SEL_RES (deciding whether another round follows). ISO 14443-3 limits NFC-A to three cascade levels and target->nfcid1 is sized accordingly (NFC_NFCID1_MAXSIZE = 10), but nothing in the driver actually enforces this. This means a malicious peer can keep the cascade running, writing past the heap-allocated nfc_target with each round. Fix this by rejecting the response when the accumulated UID would exceed the buffer. Commit e329e71013c9 ("NFC: nci: Bounds check struct nfc_target arrays") fixed similar missing checks against the same field on the NCI path. | ||||
| CVE-2026-31617 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb() The block_len read from the host-supplied NTB header is checked against ntb_max but has no lower bound. When block_len is smaller than opts->ndp_size, the bounds check of: ndp_index > (block_len - opts->ndp_size) will underflow producing a huge unsigned value that ndp_index can never exceed, defeating the check entirely. The same underflow occurs in the datagram index checks against block_len - opts->dpe_size. With those checks neutered, a malicious USB host can choose ndp_index and datagram offsets that point past the actual transfer, and the skb_put_data() copies adjacent kernel memory into the network skb. Fix this by rejecting block lengths that cannot hold at least the NTB header plus one NDP. This will make block_len - opts->ndp_size and block_len - opts->dpe_size both well-defined. Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed a related class of issues on the host side of NCM. | ||||
| CVE-2026-31613 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB reads parsing symlink error response When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message() returns success without any length validation, leaving the symlink parsers as the only defense against an untrusted server. symlink_data() walks SMB 3.1.1 error contexts with the loop test "p < end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset 0. When the server-controlled ErrorDataLength advances p to within 1-7 bytes of end, the next iteration will read past it. When the matching context is found, sym->SymLinkErrorTag is read at offset 4 from p->ErrorContextData with no check that the symlink header itself fits. smb2_parse_symlink_response() then bounds-checks the substitute name using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from iov_base. That value is computed as sizeof(smb2_err_rsp) + sizeof(smb2_symlink_err_rsp), which is correct only when ErrorContextCount == 0. With at least one error context the symlink data sits 8 bytes deeper, and each skipped non-matching context shifts it further by 8 + ALIGN(ErrorDataLength, 8). The check is too short, allowing the substitute name read to run past iov_len. The out-of-bound heap bytes are UTF-16-decoded into the symlink target and returned to userspace via readlink(2). Fix this all up by making the loops test require the full context header to fit, rejecting sym if its header runs past end, and bound the substitute name against the actual position of sym->PathBuffer rather than a fixed offset. Because sub_offs and sub_len are 16bits, the pointer math will not overflow here with the new greater-than. | ||||
| CVE-2026-31612 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate EaNameLength in smb2_get_ea() smb2_get_ea() reads ea_req->EaNameLength from the client request and passes it directly to strncmp() as the comparison length without verifying that the length of the name really is the size of the input buffer received. Fix this up by properly checking the size of the name based on the value received and the overall size of the request, to prevent a later strncmp() call to use the length as a "trusted" size of the buffer. Without this check, uninitialized heap values might be slowly leaked to the client. | ||||
| CVE-2026-31611 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: require 3 sub-authorities before reading sub_auth[2] parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares only min(num_subauth, 2) sub-authorities so a client SID with num_subauth = 2 and sub_auth = {88, 3} will match. If num_subauth = 2 and the ACE is placed at the very end of the security descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The out-of-band bytes will then be masked to the low 9 bits and applied as the file's POSIX mode, probably not something that is good to have happen. Fix this up by forcing the SID to actually carry a third sub-authority before reading it at all. | ||||
| CVE-2026-31607 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: usbip: validate number_of_packets in usbip_pack_ret_submit() When a USB/IP client receives a RET_SUBMIT response, usbip_pack_ret_submit() unconditionally overwrites urb->number_of_packets from the network PDU. This value is subsequently used as the loop bound in usbip_recv_iso() and usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible array whose size was fixed at URB allocation time based on the *original* number_of_packets from the CMD_SUBMIT. A malicious USB/IP server can set number_of_packets in the response to a value larger than what was originally submitted, causing a heap out-of-bounds write when usbip_recv_iso() writes to urb->iso_frame_desc[i] beyond the allocated region. KASAN confirmed this with kernel 7.0.0-rc5: BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640 Write of size 4 at addr ffff888106351d40 by task vhci_rx/69 The buggy address is located 0 bytes to the right of allocated 320-byte region [ffff888106351c00, ffff888106351d40) The server side (stub_rx.c) and gadget side (vudc_rx.c) already validate number_of_packets in the CMD_SUBMIT path since commits c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input"). The server side validates against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point. On the client side we have the original URB, so we can use the tighter bound: the response must not exceed the original number_of_packets. This mirrors the existing validation of actual_length against transfer_buffer_length in usbip_recv_xbuff(), which checks the response value against the original allocation size. Kelvin Mbogo's series ("usb: usbip: fix integer overflow in usbip_recv_iso()", v2) hardens the receive-side functions themselves; this patch complements that work by catching the bad value at its source -- in usbip_pack_ret_submit() before the overwrite -- and using the tighter per-URB allocation bound rather than the global USBIP_MAX_ISO_PACKETS limit. Fix this by checking rpdu->number_of_packets against urb->number_of_packets in usbip_pack_ret_submit() before the overwrite. On violation, clamp to zero so that usbip_recv_iso() and usbip_pad_iso() safely return early. | ||||
| CVE-2026-31602 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Limit PTP to a single page Commit 391e69143d0a increased CT_PTP_NUM from 1 to 4 to support 256 playback streams, but the additional pages are not used by the card correctly. The CT20K2 hardware already has multiple VMEM_PTPAL registers, but using them separately would require refactoring the entire virtual memory allocation logic. ct_vm_map() always uses PTEs in vm->ptp[0].area regardless of CT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When aggregate memory allocations exceed this limit, ct_vm_map() tries to access beyond the allocated space and causes a page fault: BUG: unable to handle page fault for address: ffffd4ae8a10a000 Oops: Oops: 0002 [#1] SMP PTI RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi] Call Trace: atc_pcm_playback_prepare+0x225/0x3b0 ct_pcm_playback_prepare+0x38/0x60 snd_pcm_do_prepare+0x2f/0x50 snd_pcm_action_single+0x36/0x90 snd_pcm_action_nonatomic+0xbf/0xd0 snd_pcm_ioctl+0x28/0x40 __x64_sys_ioctl+0x97/0xe0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e Revert CT_PTP_NUM to 1. The 256 SRC_RESOURCE_NUM and playback_count remain unchanged. | ||||
| CVE-2026-31598 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible deadlock between unlink and dio_end_io_write ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem, while in ocfs2_dio_end_io_write, it acquires these locks in reverse order. This creates an ABBA lock ordering violation on lock classes ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and ocfs2_file_ip_alloc_sem_key. Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem): ocfs2_unlink ocfs2_prepare_orphan_dir ocfs2_lookup_lock_orphan_dir inode_lock(orphan_dir_inode) <- lock A __ocfs2_prepare_orphan_dir ocfs2_prepare_dir_for_insert ocfs2_extend_dir ocfs2_expand_inline_dir down_write(&oi->ip_alloc_sem) <- Lock B Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock): ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem) <- Lock B ocfs2_del_inode_from_orphan() inode_lock(orphan_dir_inode) <- Lock A Deadlock Scenario: CPU0 (unlink) CPU1 (dio_end_io_write) ------ ------ inode_lock(orphan_dir_inode) down_write(ip_alloc_sem) down_write(ip_alloc_sem) inode_lock(orphan_dir_inode) Since ip_alloc_sem is to protect allocation changes, which is unrelated with operations in ocfs2_del_inode_from_orphan. So move ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock. | ||||
| CVE-2026-31597 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY, as documented in mm/filemap.c: "If our return value has VM_FAULT_RETRY set, it's because the mmap_lock may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()." When this happens, a concurrent munmap() can call remove_vma() and free the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call dereferences it -- a use-after-free. Fix this by saving ip_blkno as a plain integer before calling filemap_fault(), and removing vma from the trace event. Since ip_blkno is copied by value before the lock can be dropped, it remains valid regardless of what happens to the vma or inode afterward. | ||||