Export limit exceeded: 33718 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 33718 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (33718 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43166 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced plain identification for encoded extents Only plain data whose start position and on-disk physical length are both aligned to the block size should be classified as interlaced plain extents. Otherwise, it must be treated as shifted plain extents. This issue was found by syzbot using a crafted compressed image containing plain extents with unaligned physical lengths, which can cause OOB read in z_erofs_transform_plain(). | ||||
| CVE-2026-42499 | 2 Go Standard Library, Golang | 2 Net\/mail, Go | 2026-05-13 | 7.5 High |
| Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322. | ||||
| CVE-2026-43150 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/arm-cmn: Reject unsupported hardware configurations So far we've been fairly lax about accepting both unknown CMN models (at least with a warning), and unknown revisions of those which we do know, as although things do frequently change between releases, typically enough remains the same to be somewhat useful for at least some basic bringup checks. However, we also make assumptions of the maximum supported sizes and numbers of things in various places, and there's no guarantee that something new might not be bigger and lead to nasty array overflows. Make sure we only try to run on things that actually match our assumptions and so will not risk memory corruption. We have at least always failed on completely unknown node types, so update that error message for clarity and consistency too. | ||||
| CVE-2026-43153 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: remove xfs_attr_leaf_hasname The calling convention of xfs_attr_leaf_hasname() is problematic, because it returns a NULL buffer when xfs_attr3_leaf_read fails, a valid buffer when xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and a non-NULL buffer pointer for an already released buffer when xfs_attr3_leaf_lookup_int fails with other error values. Fix this by simply open coding xfs_attr_leaf_hasname in the callers, so that the buffer release code is done by each caller of xfs_attr3_leaf_read. | ||||
| CVE-2026-43139 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm_resolve_and_create_bundle+0x906/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 xfrm_lookup_route+0x63/0x2b0 ip_route_output_flow+0x1ce/0x270 udp_sendmsg+0x2ce1/0x3400 inet_sendmsg+0x1ef/0x2a0 __sock_sendmsg+0x278/0x3d0 __sys_sendto+0x593/0x720 __x64_sys_sendto+0x130/0x200 x64_sys_call+0x332b/0x3e70 do_syscall_64+0xd3/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable tmp.i.i created at: xfrm_resolve_and_create_bundle+0x3e3/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 ===================================================== Fix by checking the return value of ipv6_dev_get_saddr() and propagating the error. | ||||
| CVE-2026-40701 | 1 F5 | 2 Nginx Open Source, Nginx Plus | 2026-05-13 | 4.8 Medium |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_ssl_module module when the ssl_verify_client directive is set to "on" or "optional," and the ssl_ocsp directive is set to "on" or the leaf parameters are configured with a resolver. With this configuration, an unauthenticated attacker can send requests along with conditions beyond its control that may cause a heap-use-after-free error in the NGINX worker process. This vulnerability may result in limited modification of data or the NGINX worker process restarting. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-42264 | 1 Axios | 1 Axios | 2026-05-13 | 7.4 High |
| Axios is a promise based HTTP client for the browser and Node.js. From version 1.0.0 to before version 1.15.2, fFive config properties (auth, baseURL, socketPath, beforeRedirect, and insecureHTTPParser) in the HTTP adapter are read via direct property access without hasOwnProperty guards, making them exploitable as prototype pollution gadgets. When Object.prototype is polluted by another dependency in the same process, axios silently picks up these polluted values on every outbound HTTP request. This issue has been patched in version 1.15.2. | ||||
| CVE-2026-41163 | 1 Containers | 1 Bubblewrap | 2026-05-13 | 8.8 High |
| bubblewrap is a low-level unprivileged sandboxing tool. From version 0.11.0 to before version 0.11.2, if bubblewrap is installed in setuid mode then the user can use ptrace to attach to bubblewrap and control the unprivileged part of the sandbox setup phase. This allows the attacker to arbitrarily use the privileged operations, and in particular the "overlay mount" operation, allowing the creation of overlay mounts which is otherwise not allowed in the setuid version of bubblewrap. This issue has been patched in version 0.11.2. | ||||
| CVE-2026-33814 | 2 Go Standard Library, Golang | 3 Net/http, Go, Http2 | 2026-05-13 | 7.5 High |
| When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0. | ||||
| CVE-2026-42934 | 1 F5 | 2 Nginx Open Source, Nginx Plus | 2026-05-13 | 4.8 Medium |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_charset_module module. When charset, source_charset, and charset_map and proxy_pass with disabled buffering ("off") directives are configured, unauthenticated attackers can send requests that with conditions beyond the attackers' control to cause a heap buffer over-read in the NGINX worker process, leading to limited disclosure of memory or a restart. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-40460 | 1 F5 | 2 Nginx Open Source, Nginx Plus | 2026-05-13 | 6.5 Medium |
| When NGINX Plus or NGINX Open Source are configured to use the HTTP/3 QUIC module, an attacker may be able to spoof their source IP address allowing for bypass of authorization or bypass of rate limiting. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-39820 | 2 Go Standard Library, Golang | 2 Net/mail, Go | 2026-05-13 | 7.5 High |
| Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations. | ||||
| CVE-2026-43172 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix 22000 series SMEM parsing If the firmware were to report three LMACs (which doesn't exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is an overrun of the array. Reject such and use IWL_FW_CHECK instead of WARN_ON in this function. | ||||
| CVE-2026-5172 | 1 Dnsmasq | 1 Dnsmasq | 2026-05-13 | 7.3 High |
| A buffer overflow in dnsmasq’s extract_addresses() function allows an attacker to trigger a heap out-of-bounds read and crash by exploiting a malformed DNS response, enabling extract_name() to advance the pointer past the record’s end. | ||||
| CVE-2026-2291 | 1 Dnsmasq | 1 Dnsmasq | 2026-05-13 | 7.3 High |
| dnsmasqs extract_name() function can be abused to cause a heap buffer overflow, allowing an attacker to inject false DNS cache entries, which could result in DNS lookups to redirect to an attacker-controlled IP address, or to cause a DoS. | ||||
| CVE-2026-41109 | 1 Microsoft | 1 Visual Studio Code | 2026-05-13 | 8.8 High |
| Improper neutralization of special elements in output used by a downstream component ('injection') in GitHub Copilot and Visual Studio allows an unauthorized attacker to bypass a security feature over a network. | ||||
| CVE-2026-5958 | 1 Gnu | 1 Sed | 2026-05-13 | N/A |
| When sed is invoked with both -i (in-place edit) and --follow-symlinks, the function open_next_file() performs two separate, non-atomic filesystem operations on the same path: 1. resolves symlink to its target and stores the resolved path for determining when output is written, 2. opens the original symlink path (not the resolved one) to read the file. Between these two calls there is a race window. If an attacker atomically replaces the symlink with a different target during that window, sed will: read content from the new (attacker-chosen) symlink target and write the processed result to the path recorded in step 1. This can lead to arbitrary file overwrite with attacker-controlled content in the context of the sed process. This issue was fixed in version 4.10. | ||||
| CVE-2026-4890 | 1 Dnsmasq | 1 Dnsmasq | 2026-05-13 | 7.5 High |
| A Denial of Service (DoS) vulnerability in the DNSSEC validation of dnsmasq allows remote attackers to cause a denial of service via a crafted DNS packet. | ||||
| CVE-2026-4893 | 1 Dnsmasq | 1 Dnsmasq | 2026-05-13 | 5.3 Medium |
| An information disclosure vulnerability in dnsmasq allows remote attackers to bypass source checks via a crafted DNS packet with RFC 7871 client subnet information. | ||||
| CVE-2026-43120 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix double free related to rereg_user_mr If IB_MR_REREG_TRANS is set during rereg_user_mr, the umem will be released and a new one will be allocated in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans fails after the new umem is allocated, it releases the umem, but does not set iwmr->region to NULL. The problem is that this failure is propagated to the user, who will then call ibv_dereg_mr (as they should). Then, the dereg_mr path will see a non-NULL umem and attempt to call ib_umem_release again. Fix this by setting iwmr->region to NULL after ib_umem_release. Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region") | ||||