Export limit exceeded: 29527 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 29527 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 29527 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (29527 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23413 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: clsact: Fix use-after-free in init/destroy rollback asymmetry Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry. The latter is achieved by first fully initializing a clsact instance, and then in a second step having a replacement failure for the new clsact qdisc instance. clsact_init() initializes ingress first and then takes care of the egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon failure, the kernel will trigger the clsact_destroy() callback. Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the way how the transition is happening. If tcf_block_get_ext on the q->ingress_block ends up failing, we took the tcx_miniq_inc reference count on the ingress side, but not yet on the egress side. clsact_destroy() tests whether the {ingress,egress}_entry was non-NULL. However, even in midway failure on the replacement, both are in fact non-NULL with a valid egress_entry from the previous clsact instance. What we really need to test for is whether the qdisc instance-specific ingress or egress side previously got initialized. This adds a small helper for checking the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon clsact_destroy() in order to fix the use-after-free scenario. Convert the ingress_destroy() side as well so both are consistent to each other. | ||||
| CVE-2026-23415 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Fix UaF between futex_key_to_node_opt() and vma_replace_policy() During futex_key_to_node_opt() execution, vma->vm_policy is read under speculative mmap lock and RCU. Concurrently, mbind() may call vma_replace_policy() which frees the old mempolicy immediately via kmem_cache_free(). This creates a race where __futex_key_to_node() dereferences a freed mempolicy pointer, causing a use-after-free read of mpol->mode. [ 151.412631] BUG: KASAN: slab-use-after-free in __futex_key_to_node (kernel/futex/core.c:349) [ 151.414046] Read of size 2 at addr ffff888001c49634 by task e/87 [ 151.415969] Call Trace: [ 151.416732] __asan_load2 (mm/kasan/generic.c:271) [ 151.416777] __futex_key_to_node (kernel/futex/core.c:349) [ 151.416822] get_futex_key (kernel/futex/core.c:374 kernel/futex/core.c:386 kernel/futex/core.c:593) Fix by adding rcu to __mpol_put(). | ||||
| CVE-2026-23395 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ Currently the code attempts to accept requests regardless of the command identifier which may cause multiple requests to be marked as pending (FLAG_DEFER_SETUP) which can cause more than L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer causing an overflow. The spec is quite clear that the same identifier shall not be used on subsequent requests: 'Within each signaling channel a different Identifier shall be used for each successive request or indication.' https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d So this attempts to check if there are any channels pending with the same identifier and rejects if any are found. | ||||
| CVE-2026-31788 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: restrict usage in unprivileged domU The Xen privcmd driver allows to issue arbitrary hypercalls from user space processes. This is normally no problem, as access is usually limited to root and the hypervisor will deny any hypercalls affecting other domains. In case the guest is booted using secure boot, however, the privcmd driver would be enabling a root user process to modify e.g. kernel memory contents, thus breaking the secure boot feature. The only known case where an unprivileged domU is really needing to use the privcmd driver is the case when it is acting as the device model for another guest. In this case all hypercalls issued via the privcmd driver will target that other guest. Fortunately the privcmd driver can already be locked down to allow only hypercalls targeting a specific domain, but this mode can be activated from user land only today. The target domain can be obtained from Xenstore, so when not running in dom0 restrict the privcmd driver to that target domain from the beginning, resolving the potential problem of breaking secure boot. This is XSA-482 --- V2: - defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich) - wait in open() if target domain isn't known yet - issue message in case no target domain found (Jan Beulich) | ||||
| CVE-2024-5042 | 1 Redhat | 2 Acm, Openshift Data Foundation | 2026-04-24 | 6.6 Medium |
| A flaw was found in the Submariner project. Due to unnecessary role-based access control permissions, a privileged attacker can run a malicious container on a node that may allow them to steal service account tokens and further compromise other nodes and potentially the entire cluster. | ||||
| CVE-2025-41115 | 1 Grafana | 2 Grafana, Grafana Enterprise | 2026-04-24 | 10 Critical |
| SCIM provisioning was introduced in Grafana Enterprise and Grafana Cloud in April to improve how organizations manage users and teams in Grafana by introducing automated user lifecycle management. In Grafana versions 12.x where SCIM provisioning is enabled and configured, a vulnerability in user identity handling allows a malicious or compromised SCIM client to provision a user with a numeric externalId, which in turn could allow to override internal user IDs and lead to impersonation or privilege escalation. This vulnerability applies only if all of the following conditions are met: - `enableSCIM` feature flag set to true - `user_sync_enabled` config option in the `[auth.scim]` block set to true | ||||
| CVE-2025-41118 | 1 Grafana | 1 Pyroscope | 2026-04-24 | 9.1 Critical |
| Pyroscope is an open-source continuous profiling database. The database supports various storage backends, including Tencent Cloud Object Storage (COS). If the database is configured to use Tencent COS as the storage backend, an attacker could extract the secret_key configuration value from the Pyroscope API. To exploit this vulnerability, an attacker needs direct access to the Pyroscope API. We highly recommend limiting the public internet exposure of all our databases, such that they are only accessible by trusted users or internal systems. This vulnerability is fixed in versions: 1.15.x: 1.15.2 and above. 1.16.x: 1.16.1 and above. 1.17.x: 1.17.0 and above (i.e. all versions). Thanks to Théo Cusnir for reporting this vulnerability to us via our bug bounty program. | ||||
| CVE-2026-39987 | 2 Coreweave, Marimo-team | 2 Marimo, Marimo | 2026-04-24 | 9.8 Critical |
| marimo is a reactive Python notebook. Prior to 0.23.0, Marimo has a Pre-Auth RCE vulnerability. The terminal WebSocket endpoint /terminal/ws lacks authentication validation, allowing an unauthenticated attacker to obtain a full PTY shell and execute arbitrary system commands. Unlike other WebSocket endpoints (e.g., /ws) that correctly call validate_auth() for authentication, the /terminal/ws endpoint only checks the running mode and platform support before accepting connections, completely skipping authentication verification. This vulnerability is fixed in 0.23.0. | ||||
| CVE-2026-23340 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling. | ||||
| CVE-2026-23336 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel rfkill_block work in wiphy_unregister() There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: <TASK> dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 </TASK> The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-23317 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Return the correct value in vmw_translate_ptr functions Before the referenced fixes these functions used a lookup function that returned a pointer. This was changed to another lookup function that returned an error code with the pointer becoming an out parameter. The error path when the lookup failed was not changed to reflect this change and the code continued to return the PTR_ERR of the now uninitialized pointer. This could cause the vmw_translate_ptr functions to return success when they actually failed causing further uninitialized and OOB accesses. | ||||
| CVE-2026-23432 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Fix use-after-free in mshv_map_user_memory error path In the error path of mshv_map_user_memory(), calling vfree() directly on the region leaves the MMU notifier registered. When userspace later unmaps the memory, the notifier fires and accesses the freed region, causing a use-after-free and potential kernel panic. Replace vfree() with mshv_partition_put() to properly unregister the MMU notifier before freeing the region. | ||||
| CVE-2025-12103 | 1 Redhat | 1 Openshift Ai | 2026-04-23 | 5 Medium |
| A flaw was found in Red Hat Openshift AI Service. The TrustyAI component is granting all service accounts and users on a cluster permissions to get, list, watch any pod in any namespace on the cluster. TrustyAI is creating a role `trustyai-service-operator-lmeval-user-role` and a CRB `trustyai-service-operator-default-lmeval-user-rolebinding` which is being applied to `system:authenticated` making it so that every single user or service account can get a list of pods running in any namespace on the cluster Additionally users can access all `persistentvolumeclaims` and `lmevaljobs` | ||||
| CVE-2026-39979 | 1 Jqlang | 1 Jq | 2026-04-23 | 6.5 Medium |
| jq is a command-line JSON processor. In commits before 2f09060afab23fe9390cce7cb860b10416e1bf5f, the jv_parse_sized() API in libjq accepts a counted buffer with an explicit length parameter, but its error-handling path formats the input buffer using %s in jv_string_fmt(), which reads until a NUL terminator is found rather than respecting the caller-supplied length. This means that when malformed JSON is passed in a non-NUL-terminated buffer, the error construction logic performs an out-of-bounds read past the end of the buffer. The vulnerability is reachable by any libjq consumer calling jv_parse_sized() with untrusted input, and depending on memory layout, can result in memory disclosure or process termination. The issue has been patched in commit 2f09060afab23fe9390cce7cb860b10416e1bf5f. | ||||
| CVE-2026-40895 | 2 Follow-redirects, Follow-redirects Project | 2 Follow Redirects, Follow-redirects | 2026-04-23 | 7.5 High |
| follow-redirects is an open source, drop-in replacement for Node's `http` and `https` modules that automatically follows redirects. Prior to 1.16.0, when an HTTP request follows a cross-domain redirect (301/302/307/308), follow-redirects only strips authorization, proxy-authorization, and cookie headers (matched by regex at index.js). Any custom authentication header (e.g., X-API-Key, X-Auth-Token, Api-Key, Token) is forwarded verbatim to the redirect target. This vulnerability is fixed in 1.16.0. | ||||
| CVE-2026-40933 | 1 Flowiseai | 2 Flowise, Flowise-components | 2026-04-23 | 10 Critical |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, due to unsafe serialization of stdio commands in the MCP adapter, an authenticated attacker can add an MCP stdio server with an arbitrary command, achieving command execution. The vulnerability lies in a bug in the input sanitization from the “Custom MCP” configuration in http://localhost:3000/canvas - where any user can add a new MCP, when doing so - adding a new MCP using stdio, the user can add any command, even though your code have input sanitization checks such as validateCommandInjection and validateArgsForLocalFileAccess, and a list of predefined specific safe commands - these commands, for example "npx" can be combined with code execution arguments ("-c touch /tmp/pwn") that enable direct code execution on the underlying OS. This vulnerability is fixed in 3.1.0. | ||||
| CVE-2025-69087 | 1 Wordpress | 1 Wordpress | 2026-04-23 | 8.1 High |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in jwsthemes FreeAgent freeagent allows PHP Local File Inclusion.This issue affects FreeAgent: from n/a through <= 2.1.2. | ||||
| CVE-2025-69086 | 1 Wordpress | 1 Wordpress | 2026-04-23 | 8.1 High |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in jwsthemes Issabella issabella allows PHP Local File Inclusion.This issue affects Issabella: from n/a through <= 1.1.2. | ||||
| CVE-2025-69085 | 1 Wordpress | 1 Wordpress | 2026-04-23 | 7.1 High |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in e-plugins JobBank jobbank allows Reflected XSS.This issue affects JobBank: from n/a through <= 1.2.2. | ||||
| CVE-2025-69084 | 2 Gt3themes, Wordpress | 2 Photo Gallery, Wordpress | 2026-04-23 | 7.1 High |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in gt3themes Photo Gallery gt3-photo-video-gallery allows Reflected XSS.This issue affects Photo Gallery: from n/a through <= 2.7.7.26. | ||||