Export limit exceeded: 387143 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (387143 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-34440 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-04-15 | 7.5 High |
| Improper input validation in UEFI firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-40256 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I missed the case where state creation fails between full initialization (->init_state has been called) and being inserted on the lists. In this situation, ->init_state has been called, so for IPcomp tunnels, the fallback tunnel has been created and added onto the lists, but the user state never gets added, because we fail before that. The user state doesn't go through __xfrm_state_delete, so we don't call xfrm_state_delete_tunnel for those states, and we end up leaking the FB tunnel. There are several codepaths affected by this: the add/update paths, in both net/key and xfrm, and the migrate code (xfrm_migrate, xfrm_state_migrate). A "proper" rollback of the init_state work would probably be doable in the add/update code, but for migrate it gets more complicated as multiple states may be involved. At some point, the new (not-inserted) state will be destroyed, so call xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states will have their fallback tunnel cleaned up during __xfrm_state_delete, which solves the issue that b441cf3f8c4b (and other patches before it) aimed at. All states (including FB tunnels) will be removed from the lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). | ||||
| CVE-2025-42951 | 1 Sap | 1 Business One | 2026-04-15 | 8.8 High |
| Due to broken authorization, SAP Business One (SLD) allows an authenticated attacker to gain administrator privileges of a database by invoking the corresponding API.�As a result , it has a high impact on the confidentiality, integrity, and availability of the application. | ||||
| CVE-2025-42955 | 1 Sap | 1 Cloud Connector | 2026-04-15 | 3.5 Low |
| Due to a missing authorization check in SAP Cloud Connector, an attacker on an adjacent network with low privileges could send a crafted request to the endpoint responsible for testing LDAP connections. A successful exploit could lead to reduced performance, hence a low-impact on availability of the service. Confidentiality and integrity of the data are not affected. | ||||
| CVE-2025-42976 | 1 Sap | 2 Netweaver, Netweaver Application Server For Abap | 2026-04-15 | 8.1 High |
| SAP NetWeaver Application Server ABAP (BIC Document) allows an authenticated attacker to craft a request that, when submitted to a BIC Document application, could cause a memory corruption error. On successful exploitation, this results in the crash of the target component. Multiple submissions can make the target completely unavailable. A similarly crafted submission can be used to perform an out-of-bounds read operation as well, revealing sensitive information that is loaded in memory at that time. There is no ability to modify any information. | ||||
| CVE-2025-40265 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfat: fix missing sb_min_blocksize() return value checks When emulating an nvme device on qemu with both logical_block_size and physical_block_size set to 8 KiB, but without format, a kernel panic was triggered during the early boot stage while attempting to mount a vfat filesystem. [95553.682035] EXT4-fs (nvme0n1): unable to set blocksize [95553.684326] EXT4-fs (nvme0n1): unable to set blocksize [95553.686501] EXT4-fs (nvme0n1): unable to set blocksize [95553.696448] ISOFS: unsupported/invalid hardware sector size 8192 [95553.697117] ------------[ cut here ]------------ [95553.697567] kernel BUG at fs/buffer.c:1582! [95553.697984] Oops: invalid opcode: 0000 [#1] SMP NOPTI [95553.698602] CPU: 0 UID: 0 PID: 7212 Comm: mount Kdump: loaded Not tainted 6.18.0-rc2+ #38 PREEMPT(voluntary) [95553.699511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [95553.700534] RIP: 0010:folio_alloc_buffers+0x1bb/0x1c0 [95553.701018] Code: 48 8b 15 e8 93 18 02 65 48 89 35 e0 93 18 02 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc <0f> 0b 90 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f [95553.702648] RSP: 0018:ffffd1b0c676f990 EFLAGS: 00010246 [95553.703132] RAX: ffff8cfc4176d820 RBX: 0000000000508c48 RCX: 0000000000000001 [95553.703805] RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000000 [95553.704481] RBP: ffffd1b0c676f9c8 R08: 0000000000000000 R09: 0000000000000000 [95553.705148] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [95553.705816] R13: 0000000000002000 R14: fffff8bc8257e800 R15: 0000000000000000 [95553.706483] FS: 000072ee77315840(0000) GS:ffff8cfdd2c8d000(0000) knlGS:0000000000000000 [95553.707248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [95553.707782] CR2: 00007d8f2a9e5a20 CR3: 0000000039d0c006 CR4: 0000000000772ef0 [95553.708439] PKRU: 55555554 [95553.708734] Call Trace: [95553.709015] <TASK> [95553.709266] __getblk_slow+0xd2/0x230 [95553.709641] ? find_get_block_common+0x8b/0x530 [95553.710084] bdev_getblk+0x77/0xa0 [95553.710449] __bread_gfp+0x22/0x140 [95553.710810] fat_fill_super+0x23a/0xfc0 [95553.711216] ? __pfx_setup+0x10/0x10 [95553.711580] ? __pfx_vfat_fill_super+0x10/0x10 [95553.712014] vfat_fill_super+0x15/0x30 [95553.712401] get_tree_bdev_flags+0x141/0x1e0 [95553.712817] get_tree_bdev+0x10/0x20 [95553.713177] vfat_get_tree+0x15/0x20 [95553.713550] vfs_get_tree+0x2a/0x100 [95553.713910] vfs_cmd_create+0x62/0xf0 [95553.714273] __do_sys_fsconfig+0x4e7/0x660 [95553.714669] __x64_sys_fsconfig+0x20/0x40 [95553.715062] x64_sys_call+0x21ee/0x26a0 [95553.715453] do_syscall_64+0x80/0x670 [95553.715816] ? __fs_parse+0x65/0x1e0 [95553.716172] ? fat_parse_param+0x103/0x4b0 [95553.716587] ? vfs_parse_fs_param_source+0x21/0xa0 [95553.717034] ? __do_sys_fsconfig+0x3d9/0x660 [95553.717548] ? __x64_sys_fsconfig+0x20/0x40 [95553.717957] ? x64_sys_call+0x21ee/0x26a0 [95553.718360] ? do_syscall_64+0xb8/0x670 [95553.718734] ? __x64_sys_fsconfig+0x20/0x40 [95553.719141] ? x64_sys_call+0x21ee/0x26a0 [95553.719545] ? do_syscall_64+0xb8/0x670 [95553.719922] ? x64_sys_call+0x1405/0x26a0 [95553.720317] ? do_syscall_64+0xb8/0x670 [95553.720702] ? __x64_sys_close+0x3e/0x90 [95553.721080] ? x64_sys_call+0x1b5e/0x26a0 [95553.721478] ? do_syscall_64+0xb8/0x670 [95553.721841] ? irqentry_exit+0x43/0x50 [95553.722211] ? exc_page_fault+0x90/0x1b0 [95553.722681] entry_SYSCALL_64_after_hwframe+0x76/0x7e [95553.723166] RIP: 0033:0x72ee774f3afe [95553.723562] Code: 73 01 c3 48 8b 0d 0a 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d da 32 0f 00 f7 d8 64 89 01 48 [95553.725188] RSP: 002b:00007ffe97148978 EFLAGS: 00000246 ORIG_RAX: 00000000000001af [95553.725892] RAX: ffffffffffffffda RBX: ---truncated--- | ||||
| CVE-2025-1977 | 1 Moxa | 2 Nport 6100-g2 Series, Nport 6200-g2 Series | 2026-04-15 | N/A |
| The NPort 6100-G2/6200-G2 Series is affected by an execution with unnecessary privileges vulnerability (CVE-2025-1977) that allows an authenticated user with read-only access to perform unauthorized configuration changes through the MCC (Moxa CLI Configuration) tool. The issue can be exploited remotely over the network with low-attack complexity and no user interaction but requires specific system conditions or configurations to be present. Successful exploitation may result in changes to device settings that were not intended to be permitted for the affected user role, potentially leading to a high impact on the confidentiality, integrity, and availability of the device. No impact on other systems has been identified. | ||||
| CVE-2025-20252 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense Software | 2026-04-15 | 5.8 Medium |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition. This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. | ||||
| CVE-2025-2026 | 1 Moxa | 2 Nport 6100-g2 Series, Nport 6200-g2 Series | 2026-04-15 | N/A |
| The NPort 6100-G2/6200-G2 Series is affected by a high-severity vulnerability (CVE-2025-2026) that allows remote attackers to execute a null byte injection through the device’s web API. This may lead to an unexpected device reboot and result in a denial-of-service (DoS) condition. An authenticated remote attacker with web read-only privileges can exploit the vulnerable API to inject malicious input. Successful exploitation may cause the device to reboot, disrupting normal operations and causing a temporary denial of service. | ||||
| CVE-2025-4081 | 2026-04-15 | N/A | ||
| Use of entitlement "com.apple.security.cs.disable-library-validation" and lack of launch and library load constraints allows to substitute a legitimate dylib with malicious one. A local attacker with unprivileged access can execute the application with altered dynamic library successfully bypassing Transparency, Consent, and Control (TCC). Acquired resource access is limited to previously granted permissions by the user. Access to other resources beyond granted-permissions requires user interaction with a system prompt asking for permission. This issue affects DaVinci Resolve on macOS in all versions. Last tested version: 19.1.3 | ||||
| CVE-2025-62292 | 1 Sonarsource | 1 Sonarqube | 2026-04-15 | 4.3 Medium |
| In SonarQube before 25.6, 2025.3 Commercial, and 2025.1.3 LTA, authenticated low-privileged users can query the /api/v2/users-management/users endpoint and obtain user fields intended for administrators only, including the email addresses of other accounts. | ||||
| CVE-2025-41250 | 1 Vmware | 3 Cloud Foundation, Vcenter, Vsphere | 2026-04-15 | 8.5 High |
| VMware vCenter contains an SMTP header injection vulnerability. A malicious actor with non-administrative privileges on vCenter who has permission to create scheduled tasks may be able to manipulate the notification emails sent for scheduled tasks. | ||||
| CVE-2025-41251 | 1 Vmware | 3 Cloud Foundation, Nsx, Nsx-t | 2026-04-15 | 8.1 High |
| VMware NSX contains a weak password recovery mechanism vulnerability. An unauthenticated malicious actor may exploit this to enumerate valid usernames, potentially enabling brute-force attacks. Impact: Username enumeration → credential brute force risk. Attack Vector: Remote, unauthenticated. Severity: Important. CVSSv3: 8.1 (High). Acknowledgments: Reported by the National Security Agency. Affected Products:VMware NSX 9.x.x.x, 4.2.x, 4.1.x, 4.0.x NSX-T 3.x VMware Cloud Foundation (with NSX) 5.x, 4.5.x Fixed Versions: NSX 9.0.1.0; 4.2.2.2/4.2.3.1 http://4.2.2.2/4.2.3.1 ; 4.1.2.7; NSX-T 3.2.4.3; CCF async patch (KB88287). Workarounds: None. | ||||
| CVE-2025-4371 | 2026-04-15 | 6.8 Medium | ||
| A potential vulnerability was reported in the Lenovo 510 FHD and Performance FHD web cameras that could allow an attacker with physical access to write arbitrary firmware updates to the device over a USB connection. | ||||
| CVE-2025-23203 | 2026-04-15 | 5.5 Medium | ||
| Icinga Director is an Icinga config deployment tool. A Security vulnerability has been found starting in version 1.0.0 and prior to 1.10.4 and 1.11.4 on several director endpoints of REST API. To reproduce this vulnerability an authenticated user with permission to access the Director is required (plus api access with regard to the api endpoints). And even though some of these Icinga Director users are restricted from accessing certain objects, are able to retrieve information related to them if their name is known. This makes it possible to change the configuration of these objects by those Icinga Director users restricted from accessing them. This results in further exploitation, data breaches and sensitive information disclosure. Affected endpoints include icingaweb2/director/service, if the host name is left out of the query; icingaweb2/directore/notification; icingaweb2/director/serviceset; and icingaweb2/director/scheduled-downtime. In addition, the endpoint `icingaweb2/director/services?host=filteredHostName` returns a status code 200 even though the services for the host is filtered. This in turn lets the restricted user know that the host `filteredHostName` exists even though the user is restricted from accessing it. This could again result in further exploitation of this information and data breaches. Icinga Director has patches in versions 1.10.4 and 1.11.4. If upgrading is not feasible, disable the director module for the users other than admin role for the time being. | ||||
| CVE-2025-43858 | 2026-04-15 | 9.2 Critical | ||
| YoutubeDLSharp is a wrapper for the command-line video downloaders youtube-dl and yt-dlp. In versions starting from 1.0.0-beta4 and prior to 1.1.2, an unsafe conversion of arguments allows the injection of a malicious commands when starting `yt-dlp` from a commands prompt running on Windows OS with the `UseWindowsEncodingWorkaround` value defined to true (default behavior). If a user is using built-in methods from the YoutubeDL.cs file, the value is true by default and a user cannot disable it from these methods. This issue has been patched in version 1.1.2. | ||||
| CVE-2023-7295 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 6.1 Medium |
| The Video Grid plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the search_term parameter in versions up to, and including, 1.21 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | ||||
| CVE-2025-27370 | 1 Openid | 1 Openid Connect | 2026-04-15 | 6.9 Medium |
| OpenID Connect Core through 1.0 errata set 2 allows audience injection in certain situations. When the private_key_jwt authentication mechanism is used, a malicious Authorization Server could trick a Client into writing attacker-controlled values into the audience, including token endpoints or issuer identifiers of other Authorization Servers. The malicious Authorization Server could then use these private key JWTs to impersonate the Client. | ||||
| CVE-2025-44018 | 1 Gl-inet | 1 Gl-axt1800 | 2026-04-15 | 8.3 High |
| A firmware downgrade vulnerability exists in the OTA Update functionality of GL-Inet GL-AXT1800 4.7.0. A specially crafted .tar file can lead to a firmware downgrade. An attacker can perform a man-in-the-middle attack to trigger this vulnerability. | ||||
| CVE-2023-43758 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-04-15 | 8.2 High |
| Improper input validation in UEFI firmware for some Intel(R) processors may allow a privileged user to potentially enable escalation of privilege via local access. | ||||