Export limit exceeded: 33416 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (33416 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-12685 | 3 Iqonic, Iqonicdesign, Wordpress | 3 Wpbookit, Wpbookit, Wordpress | 2026-04-27 | 6.5 Medium |
| The WPBookit WordPress plugin through 1.0.7 lacks a CSRF check when deleting customers. This could allow an unauthenticated attacker to delete any customer through a CSRF attack. | ||||
| CVE-2026-31570 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gw: fix OOB heap access in cgw_csum_crc8_rel() cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx(): int from = calc_idx(crc8->from_idx, cf->len); int to = calc_idx(crc8->to_idx, cf->len); int res = calc_idx(crc8->result_idx, cf->len); if (from < 0 || to < 0 || res < 0) return; However, the loop and the result write then use the raw s8 fields directly instead of the computed variables: for (i = crc8->from_idx; ...) /* BUG: raw negative index */ cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */ With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame, calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with i = -64, reading cf->data[-64], and the write goes to cf->data[-64]. This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the start of the canfd_frame on the heap. The companion function cgw_csum_xor_rel() uses `from`/`to`/`res` correctly throughout; fix cgw_csum_crc8_rel() to match. Confirmed with KASAN on linux-7.0-rc2: BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0 Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62 To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed. | ||||
| CVE-2026-31569 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Handle the case that EIOINTC's coremap is empty EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently we get a cpuid with -1 in this case, but we actually need 0 because it's similar as the case that cpuid >= 4. This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. | ||||
| CVE-2026-31566 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence from amdgpu_ib_schedule(). This fence is used to wait for job completion. Currently, the code drops the fence reference using dma_fence_put() before calling dma_fence_wait(). If dma_fence_put() releases the last reference, the fence may be freed before dma_fence_wait() is called. This can lead to a use-after-free. Fix this by waiting on the fence first and releasing the reference only after dma_fence_wait() completes. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696) (cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482) | ||||
| CVE-2026-31563 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: Use dev_consume_skb_any() to free TX SKBs The napi_consume_skb() function is not intended to be called in an IRQ disabled context. However, after commit 6bc8a5098bf4 ("net: macb: Fix tx_ptr_lock locking"), the freeing of TX SKBs is performed with IRQs disabled. To resolve the following call trace, use dev_consume_skb_any() for freeing TX SKBs: WARNING: kernel/softirq.c:430 at __local_bh_enable_ip+0x174/0x188, CPU#0: ksoftirqd/0/15 Modules linked in: CPU: 0 UID: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 7.0.0-rc4-next-20260319-yocto-standard-dirty #37 PREEMPT Hardware name: ZynqMP ZCU102 Rev1.1 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __local_bh_enable_ip+0x174/0x188 lr : local_bh_enable+0x24/0x38 sp : ffff800082b3bb10 x29: ffff800082b3bb10 x28: ffff0008031f3c00 x27: 000000000011ede0 x26: ffff000800a7ff00 x25: ffff800083937ce8 x24: 0000000000017a80 x23: ffff000803243a78 x22: 0000000000000040 x21: 0000000000000000 x20: ffff000800394c80 x19: 0000000000000200 x18: 0000000000000001 x17: 0000000000000001 x16: ffff000803240000 x15: 0000000000000000 x14: ffffffffffffffff x13: 0000000000000028 x12: ffff000800395650 x11: ffff8000821d1528 x10: ffff800081c2bc08 x9 : ffff800081c1e258 x8 : 0000000100000301 x7 : ffff8000810426ec x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000008 x1 : 0000000000000200 x0 : ffff8000810428dc Call trace: __local_bh_enable_ip+0x174/0x188 (P) local_bh_enable+0x24/0x38 skb_attempt_defer_free+0x190/0x1d8 napi_consume_skb+0x58/0x108 macb_tx_poll+0x1a4/0x558 __napi_poll+0x50/0x198 net_rx_action+0x1f4/0x3d8 handle_softirqs+0x16c/0x560 run_ksoftirqd+0x44/0x80 smpboot_thread_fn+0x1d8/0x338 kthread+0x120/0x150 ret_from_fork+0x10/0x20 irq event stamp: 29751 hardirqs last enabled at (29750): [<ffff8000813be184>] _raw_spin_unlock_irqrestore+0x44/0x88 hardirqs last disabled at (29751): [<ffff8000813bdf60>] _raw_spin_lock_irqsave+0x38/0x98 softirqs last enabled at (29150): [<ffff8000800f1aec>] handle_softirqs+0x504/0x560 softirqs last disabled at (29153): [<ffff8000800f2fec>] run_ksoftirqd+0x44/0x80 | ||||
| CVE-2026-31631 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix buffer overread in rxgk_do_verify_authenticator() Fix rxgk_do_verify_authenticator() to check the buffer size before checking the nonce. | ||||
| CVE-2026-31633 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix integer overflow in rxgk_verify_response() In rxgk_verify_response(), there's a potential integer overflow due to rounding up token_len before checking it, thereby allowing the length check to be bypassed. Fix this by checking the unrounded value against len too (len is limited as the response must fit in a single UDP packet). | ||||
| CVE-2026-31636 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix RESPONSE authenticator parser OOB read rxgk_verify_authenticator() copies auth_len bytes into a temporary buffer and then passes p + auth_len as the parser limit to rxgk_do_verify_authenticator(). Since p is a __be32 *, that inflates the parser end pointer by a factor of four and lets malformed RESPONSE authenticators read past the kmalloc() buffer. Decoded from the original latest-net reproduction logs with scripts/decode_stacktrace.sh: BUG: KASAN: slab-out-of-bounds in rxgk_verify_response() Call Trace: dump_stack_lvl() [lib/dump_stack.c:123] print_report() [mm/kasan/report.c:379 mm/kasan/report.c:482] kasan_report() [mm/kasan/report.c:597] rxgk_verify_response() [net/rxrpc/rxgk.c:1103 net/rxrpc/rxgk.c:1167 net/rxrpc/rxgk.c:1274] rxrpc_process_connection() [net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364 net/rxrpc/conn_event.c:386] process_one_work() [kernel/workqueue.c:3281] worker_thread() [kernel/workqueue.c:3353 kernel/workqueue.c:3440] kthread() [kernel/kthread.c:436] ret_from_fork() [arch/x86/kernel/process.c:164] Allocated by task 54: rxgk_verify_response() [include/linux/slab.h:954 net/rxrpc/rxgk.c:1155 net/rxrpc/rxgk.c:1274] rxrpc_process_connection() [net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364 net/rxrpc/conn_event.c:386] Convert the byte count to __be32 units before constructing the parser limit. | ||||
| CVE-2026-31638 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Only put the call ref if one was acquired rxrpc_input_packet_on_conn() can process a to-client packet after the current client call on the channel has already been torn down. In that case chan->call is NULL, rxrpc_try_get_call() returns NULL and there is no reference to drop. The client-side implicit-end error path does not account for that and unconditionally calls rxrpc_put_call(). This turns a protocol error path into a kernel crash instead of rejecting the packet. Only drop the call reference if one was actually acquired. Keep the existing protocol error handling unchanged. | ||||
| CVE-2026-31584 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: fix use-after-free in encoder release path The fops_vcodec_release() function frees the context structure (ctx) without first cancelling any pending or running work in ctx->encode_work. This creates a race window where the workqueue handler (mtk_venc_worker) may still be accessing the context memory after it has been freed. Race condition: CPU 0 (release path) CPU 1 (workqueue) --------------------- ------------------ fops_vcodec_release() v4l2_m2m_ctx_release() v4l2_m2m_cancel_job() // waits for m2m job "done" mtk_venc_worker() v4l2_m2m_job_finish() // m2m job "done" // BUT worker still running! // post-job_finish access: other ctx dereferences // UAF if ctx already freed // returns (job "done") kfree(ctx) // ctx freed Root cause: The v4l2_m2m_ctx_release() only waits for the m2m job lifecycle (via TRANS_RUNNING flag), not the workqueue lifecycle. After v4l2_m2m_job_finish() is called, the m2m framework considers the job complete and v4l2_m2m_ctx_release() returns, but the worker function continues executing and may still access ctx. The work is queued during encode operations via: queue_work(ctx->dev->encode_workqueue, &ctx->encode_work) The worker function accesses ctx->m2m_ctx, ctx->dev, and other ctx fields even after calling v4l2_m2m_job_finish(). This vulnerability was confirmed with KASAN by running an instrumented test module that widens the post-job_finish race window. KASAN detected: BUG: KASAN: slab-use-after-free in mtk_venc_worker+0x159/0x180 Read of size 4 at addr ffff88800326e000 by task kworker/u8:0/12 Workqueue: mtk_vcodec_enc_wq mtk_venc_worker Allocated by task 47: __kasan_kmalloc+0x7f/0x90 fops_vcodec_open+0x85/0x1a0 Freed by task 47: __kasan_slab_free+0x43/0x70 kfree+0xee/0x3a0 fops_vcodec_release+0xb7/0x190 Fix this by calling cancel_work_sync(&ctx->encode_work) before kfree(ctx). This ensures the workqueue handler is both cancelled (if pending) and synchronized (waits for any running handler to complete) before the context is freed. Placement rationale: The fix is placed after v4l2_ctrl_handler_free() and before list_del_init(&ctx->list). At this point, all m2m operations are done (v4l2_m2m_ctx_release() has returned), and we need to ensure the workqueue is synchronized before removing ctx from the list and freeing it. Note: The open error path does NOT need cancel_work_sync() because INIT_WORK() only initializes the work structure - it does not schedule it. Work is only scheduled later during device_run() operations. | ||||
| CVE-2026-31640 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial In rxrpc_post_response(), the code should be comparing the challenge serial number from the cached response before deciding to switch to a newer response, but looks at the newer packet private data instead, rendering the comparison always false. Fix this by switching to look at the older packet. Fix further[1] to substitute the new packet in place of the old one if newer and also to release whichever we don't use. | ||||
| CVE-2026-31641 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix RxGK token loading to check bounds rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length from the XDR token as u32 values and passes each through round_up(x, 4) before using the rounded value for validation and allocation. When the raw length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and kzalloc both use 0 while the subsequent memcpy still copies the original ~4 GiB value, producing a heap buffer overflow reachable from an unprivileged add_key() call. Fix this by: (1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX. (2) Sizing the flexible-array allocation from the validated raw key length via struct_size_t() instead of the rounded value. (3) Caching the raw lengths so that the later field assignments and memcpy calls do not re-read from the token, eliminating a class of TOCTOU re-parse. The control path (valid token with lengths within bounds) is unaffected. | ||||
| CVE-2026-31644 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: fix use-after-free and leak in lan966x_fdma_reload() When lan966x_fdma_reload() fails to allocate new RX buffers, the restore path restarts DMA using old descriptors whose pages were already freed via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can release pages back to the buddy allocator, the hardware may DMA into memory now owned by other kernel subsystems. Additionally, on the restore path, the newly created page pool (if allocation partially succeeded) is overwritten without being destroyed, leaking it. Fix both issues by deferring the release of old pages until after the new allocation succeeds. Save the old page array before the allocation so old pages can be freed on the success path. On the failure path, the old descriptors, pages and page pool are all still valid, making the restore safe. Also ensure the restore path re-enables NAPI and wakes the netdev, matching the success path. | ||||
| CVE-2026-31662 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements bc_ackers on every inbound group ACK, even when the same member has already acknowledged the current broadcast round. Because bc_ackers is a u16, a duplicate ACK received after the last legitimate ACK wraps the counter to 65535. Once wrapped, tipc_group_bc_cong() keeps reporting congestion and later group broadcasts on the affected socket stay blocked until the group is recreated. Fix this by ignoring duplicate or stale ACKs before touching bc_acked or bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and prevents the underflow path. | ||||
| CVE-2026-31659 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject oversized global TT response buffers batadv_tt_prepare_tvlv_global_data() builds the allocation length for a global TT response in 16-bit temporaries. When a remote originator advertises a large enough global TT, the TT payload length plus the VLAN header offset can exceed 65535 and wrap before kmalloc(). The full-table response path still uses the original TT payload length when it fills tt_change, so the wrapped allocation is too small and batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object before the later packet-size check runs. Fix this by rejecting TT responses whose TVLV value length cannot fit in the 16-bit TVLV payload length field. | ||||
| CVE-2026-31548 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down When the nl80211 socket that originated a PMSR request is closed, cfg80211_release_pmsr() sets the request's nl_portid to zero and schedules pmsr_free_wk to process the abort asynchronously. If the interface is concurrently torn down before that work runs, cfg80211_pmsr_wdev_down() calls cfg80211_pmsr_process_abort() directly. However, the already- scheduled pmsr_free_wk work item remains pending and may run after the interface has been removed from the driver. This could cause the driver's abort_pmsr callback to operate on a torn-down interface, leading to undefined behavior and potential crashes. Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down() before calling cfg80211_pmsr_process_abort(). This ensures any pending or in-progress work is drained before interface teardown proceeds, preventing the work from invoking the driver abort callback after the interface is gone. | ||||
| CVE-2026-31552 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push"), wl1271_tx_allocate() and with it wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails. However, in wlcore_tx_work_locked(), a return value of -EAGAIN from wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being full. This causes the code to flush the buffer, put the skb back at the head of the queue, and immediately retry the same skb in a tight while loop. Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens immediately with GFP_ATOMIC, this will result in an infinite loop and a CPU soft lockup. Return -ENOMEM instead so the packet is dropped and the loop terminates. The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y. | ||||
| CVE-2026-31553 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc() Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2 descriptors looks really wrong, if offset is not zero. What we want to get for swapping is hva + offset, not hva + offset*8. ;-) Fix it. | ||||
| CVE-2026-31554 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Require sys_futex_requeue() to have identical flags Nicholas reported that his LLM found it was possible to create a UaF when sys_futex_requeue() is used with different flags. The initial motivation for allowing different flags was the variable sized futex, but since that hasn't been merged (yet), simply mandate the flags are identical, as is the case for the old style sys_futex() requeue operations. | ||||
| CVE-2026-31557 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: move async event work off nvmet-wq For target nvmet_ctrl_free() flushes ctrl->async_event_work. If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue completion for the same worker:- A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work() C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2nd Lockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390 Move async event work to a dedicated nvmet-aen-wq to avoid reentrant flush on nvmet-wq. | ||||