Export limit exceeded: 405802 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (405802 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93168 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a condition that is never fulfilled, the CPU busy-waits for prolonged time and the timeout triggers only with a massive delay causing a CPU stall. This happens due to a huge underestimation of wall clock time in poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use timekeeping in read_poll_timeout_atomic()") changed the behavior to no longer use ktime_get at the expense of underestimation of wall clock time which appears to be very large for delay_us=0. Instead of timing out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for loop in poll_timeout_us_atomic takes) which is in the range of several minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero value for delay_us. Use delay_us=10 to keep the delay in the hot path of starting DMA transfers minimal but still avoid CPU stalls in case of unexpected hardware failures. One-off measurement with delay_us=0 causes the cpu to busy wait around 7 minutes in the timeout case. After applying this patch with delay_us=10 the measured timeout was 1053428 microseconds which is roughly equivalent to the expected 1000000 microseconds specified in XILINX_DMA_LOOP_COUNT. Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value. | ||||
| CVE-2026-93163 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: core - fix rng list on registration error hwrng_register(rng) does the following: 1. Checks if rng has name and read methods set 2. Checks if the name already exists 3. Adds rng to global rng_list 4. May try to set rng to current_rng If step 4 fails, it returns an error. However, it does not remove the rng from rng_list, causing a dangling reference which can result in use-after-free if the caller frees rng, since registration failed. Add a list_del_init() cleanup step. | ||||
| CVE-2026-93155 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Fix AEAD unregister count in error path register_aes_algs() registers the AEAD algorithms before registering the skcipher algorithms. If skcipher registration fails, the function unwinds the earlier AEAD registration with crypto_engine_unregister_aeads(), but it passes ARRAY_SIZE(algs), which is the skcipher table size. Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper iterates over the same table that was registered. Also clarify the nearby comment: the crypto registration helpers clean up algorithms registered within the same call, while this function must still unwind earlier successful registration steps. | ||||
| CVE-2026-93150 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Make nr_deadline_tasks an atomic_t The nr_deadline_tasks variable in the cpuset structure was introduced by commit 6c24849f5515 ("sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets"). It is reported by sashiko [1] that nr_deadline_tasks can currently be modified by inc_dl_tasks_cs() under rq->lock and by cpuset_attach() under cpuset_mutex. So if both updates happen simultaneously, the nr_deadline_tasks variable can be corrupted leading to incorrect operations down the road. Fix that by changing its type to atomic_t so that nr_deadline_tasks are always atomically updated. This fix patch is a low hanging fruit. It can handle some of the races between a concurrent sched_setscheduler() and cpuset_can_attach()/cpuset_attach() calls, but not all of them like the other issue raised by sashiko [2]. This will be handled hopefully in a future follow up patch. [1] https://sashiko.dev/#/patchset/20260626181923.133658-1-longman%40redhat.com [2] https://sashiko.dev/#/patchset/20260630033344.352702-1-longman%40redhat.com | ||||
| CVE-2026-93146 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: time/namespace: Validate nanosecond field in proc_timens_set_offset() The function validates tv_sec to be within [-KTIME_SEC_MAX, KTIME_SEC_MAX] but never validates that tv_nsec is within the valid range of [0, NSEC_PER_SEC-1] before using it in timespec64_add(). timespec64_add() expects both timespec64 structures to have normalized values with tv_nsec in the range [0, 999999999]. If off->val.tv_nsec contains invalid values (negative or >= NSEC_PER_SEC), it could lead to incorrect calculations or unexpected behavior. Add validation to ensure tv_nsec is within the valid range before performing the addition. | ||||
| CVE-2026-93129 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-base: Fix handling of ultra performance key The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches") states that the ultra performance key contains additional data after the type and code fields. The event data passed to dell_wmi_process_key() is already parsed, so "buffer" already starts after those two fields. Use the correct index for accessing the first data field to avoid a potential buffer overread. | ||||
| CVE-2026-93128 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: lg-laptop: Fix LED resource handling The event notification callback might access kbd_backlight even when it was not successfully registered with the LED subsystem. The same happens inside acpi_remove(), where the LED devices are unregistered unconditionally. Fix this by tracking the availability of the kbd_backlight LED device and use devm_led_classdev_register() to let devres take care of unregistering the LED devices during removal. For this the parent device of the LED devices is changed to the native platform device. | ||||
| CVE-2026-93125 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max check_kfunc_args() detects a kfunc argument named rdonly_buf_size or rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64, and does not bound it. check_kfunc_call() later copies that value into the returned register's mem_size field: meta->r0_size = reg->var_off.value; ... regs[BPF_REG_0].mem_size = meta.r0_size; regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set gets truncated instead of causing a load-time rejection, so the verifier records a PTR_TO_MEM register with an approximately 4 GiB mem_size for whatever allocation the kfunc returned. A later access check against that register uses the truncated, wrong bound. Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the point meta->r0_size is set. | ||||
| CVE-2026-93122 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-list attributes parse a comma-separated list of sampling rates and store each parsed value in fixed-size arrays. The arrays have UAC_MAX_RATES entries, but the store paths do not check that the input contains at most that many tokens before writing through opts->name##s[i++]. Writing more than ten rates therefore writes past the end of the p_srates[] or c_srates[] array in struct f_uac1_opts or struct f_uac2_opts. With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the UAC1 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac1.c:1669:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac1_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 The same reproducer against the UAC2 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac2.c:2087:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac2_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 Reject additional tokens once UAC_MAX_RATES entries have been parsed. Also keep the original kstrdup() pointer for kfree(), because strsep() advances the parsing cursor. Freeing the advanced cursor leaks the original buffer on successful parses and can free an interior pointer on some error paths. | ||||
| CVE-2026-93116 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wmi: fix resource leaks on probe failure During driver initialization in asus_wmi_add(), various subsystems are registered sequentially. However, the error path labels are out of order relative to the registration sequence. Specifically: 1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to fail_custom_fan_curve. Because this label is placed below fail_sysfs, it bypasses the cleanup calls for the input device and sysfs groups, which were successfully registered before, leaking those resources. 2. If asus_screenpad_init() fails, the driver jumps to fail_screenpad. Because fail_screenpad is placed below fail_backlight, it bypasses the cleanup calls for backlight and rfkill, leaking those resources. Fix these resource leaks by reordering the error path labels in asus_wmi_add() to match the exact reverse order of the resource allocations. | ||||
| CVE-2026-93105 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: esp: do not unref managed frag pages in esp_ssg_unref() esp_ssg_unref() releases the page references held on the source scatterlist after the AEAD operation completes. It calls skb_page_unref() on every frag page for an out-of-place transform (req->src != req->dst), and in the error path of esp_output_tail() (already_unref == true) on the request's own scatterlist. This is wrong when the skb carries managed frags (SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf and the skb does not hold a per-frag page reference; io_uring SEND_ZC with a registered buffer attaches the bvec pages this way via io_sg_from_iter(). The rest of the stack honours this invariant: skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS is set, and skb_zcopy_managed() is the guard used at the other unref sites. esp_ssg_unref() is missing that guard, so for a managed-frag skb it drops a page reference the skb never acquired. This can underflow the page reference count and free a page that is still in use. Guard the function with skb_zcopy_managed() so both unref paths are skipped for managed-frag skbs, matching skb_release_data(). | ||||
| CVE-2026-93104 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB device when its port array cannot be allocated but then returns the pointer to the released allocation. Callers treat any non-NULL value as valid and dereference it, resulting in a use-after-free. Return NULL immediately after deallocation so callers can propagate the allocation failure. | ||||
| CVE-2026-93100 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Prevent use-after-free in rdtgroup_kn_put() A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that need the structure to remain valid across a sleep (while waiting on acquiring rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with rdtgroup_kn_put(). The release path is intended to serve as the fallback freer: if the count drops to zero and the group has already been marked RDT_DELETED, rdtgroup_kn_put() frees the structure. The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting from a resctrl directory remove or resctrl fs unmount act as the primary freer: they hold rdtgroup_mutex and free each rdtgroup whose waitcount is zero, otherwise they set RDT_DELETED and leave the freeing to the last waiter. These two freers race. rdtgroup_kn_put() commits waitcount == 0 with atomic_dec_and_test() outside rdtgroup_mutex, then reads rdtgroup::flags. Between those two operations a concurrent caller of free_all_child_rdtgrp() or rmdir_all_sub() (which holds the mutex) can observe waitcount == 0 via atomic_read(), call rdtgroup_remove(), and kfree() the structure. The subsequent read of rdtgroup::flags in rdtgroup_kn_put() is then a use-after-free, and the structure may even be freed twice if the freed memory happens to satisfy the RDT_DELETED flag check. Replace the bare atomic_dec_and_test() with atomic_dec_and_mutex_lock() so that the decrement-to-zero takes rdtgroup_mutex before the count becomes globally visible. The inspection of rdtgroup::flags then runs under the same mutex held by the bulk freers, making the two paths mutually exclusive. The common case where the count does not reach zero remains lock-free. Defer kernfs_unbreak_active_protection() until after the mutex is dropped since kernfs active protections functionally wrap rdtgroup_mutex. Remove resource group, which in turn drops its kernfs reference, after kernfs protection is restored. [ bp: Split the commit messsages into smaller, easier-parseable paragraphs. ] | ||||
| CVE-2026-93093 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Publish channel state before callbacks Transport setup can enable callbacks before the setup routine returns. mailbox_chan_setup() registers the mailbox client with mbox_request_channel(), and the mailbox controller startup path can enable interrupt delivery before SCMI mailbox channel state has been published. Similarly, smc_chan_setup() requests the optional A2P completion IRQ before the SMC transport has made its cinfo pointer visible. If a pending or spurious callback fires in those windows, the transport RX callback can dereference a NULL transport cinfo pointer. Publishing only the transport-private pointer is not sufficient either: an early callback can enter the SCMI core before scmi_chan_setup() has assigned cinfo->handle. The core derives scmi_info from cinfo->handle in the RX path, so a NULL handle can still fault even when the transport-private cinfo is valid. Assign cinfo->handle before invoking the transport setup callback. Publish the mailbox and SMC transport-private channel state before requesting the mailbox channels or IRQ, and clear the early-published pointers again on setup failure. Also unwind mailbox setup devres resources on failure so an optional RX setup error that is ignored by the core does not leave stale transport state behind. | ||||
| CVE-2026-93092 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unregister device notifier before IDR teardown The requested-devices notifier looks up protocol fwnodes from the active_protocols IDR. During remove, unregister the notifier before releasing and destroying active_protocols so no notifier callback can race with the IDR teardown. Keep the bus notifier registered until after the protocol state is torn down, matching the existing remove ordering for SCMI bus users. | ||||
| CVE-2026-93089 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Free transport channel on IDR failure If transport channel setup succeeds but the following IDR insertion fails, the error path destroys the transport device and frees the channel info without invoking the transport cleanup callback. Call chan_free() before destroying the device so transport specific resources such as IRQs, mailbox channels and mapped shared memory are released consistently with the normal teardown path. | ||||
| CVE-2026-93086 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Avoid IDR updates while cleaning channels scmi_cleanup_channels() walks the TX/RX channel IDRs with idr_for_each() to free transport resources and destroy the dedicated transport devices before calling idr_destroy(). The destroy callback removed each entry from the same IDR being walked. That is not needed for this cleanup path, and it is unsafe because idr_for_each() has not advanced its radix-tree iterator while the callback is running. Removing the current entry from the callback can invalidate the iterator state. The callback also cannot be protected by rcu_read_lock(), because scmi_device_destroy() may sleep. Leave IDR teardown to the following idr_destroy() call and keep the callback limited to device destruction. | ||||
| CVE-2026-93085 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Reject out of range DT protocol IDs SCMI protocol IDs carried in message headers are limited by MSG_PROTOCOL_ID_MASK. The DT parsing paths noticed protocol IDs outside that range, but only logged an error and then kept processing the invalid value. That lets a malformed 32-bit DT reg value reach helpers which take a u8 protocol ID, where it can be truncated and/or treated as a different protocol. For channel setup, two different out-of-range values can also be used as distinct IDR keys while aliasing the generated SCMI protocol identity. Skip DT protocol nodes whose reg value does not fit the SCMI protocol ID field before setting up channels or creating protocol devices. | ||||
| CVE-2026-93084 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Drop handle on protocol bind failures The SCMI bus notifier acquires an SCMI handle when the driver core emits BUS_NOTIFY_BIND_DRIVER, before invoking the protocol driver probe callback. The protocol probe path only checks whether sdev->handle is set. If device_link_add() fails after the handle has been acquired, the protocol device can still bind with a valid handle but without the dependency link to the SCMI parent. A concurrent parent unbind can then miss the child and tear down the SCMI instance while the child still holds a handle into it. If the protocol driver probe later fails, for example with -EPROBE_DEFER, the driver core emits BUS_NOTIFY_DRIVER_NOT_BOUND rather than BUS_NOTIFY_UNBOUND_DRIVER. The SCMI notifier only released the handle on BUS_NOTIFY_UNBOUND_DRIVER, so each failed protocol-device bind leaked the SCMI instance users refcount and left sdev->handle set after the failed probe. Make the link helper report failure and drop the acquired handle if the link cannot be created. Also handle BUS_NOTIFY_DRIVER_NOT_BOUND in the same cleanup path used for unbind so failed probes balance the earlier BUS_NOTIFY_BIND_DRIVER acquisition. | ||||
| CVE-2026-93081 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix SCMI device destroy lifetimes scmi_child_dev_find() drops the reference returned by device_find_child() before returning the scmi_device pointer. A concurrent unregister can then release the device while the destroy path is still using the returned pointer. Make the lookup helper return the device_find_child() reference and keep it until scmi_device_destroy() has finished unregistering the child. Also split device_unregister() in __scmi_device_destroy() so the SCMI bus ID is not made reusable until after device_del() has removed the old scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the same ID while the old device is still registered. The final device release callback is also a possible cleanup path when SCMI children are deleted by driver core recursion rather than __scmi_device_destroy(). Release the SCMI bus ID from a common helper used by destroy, register-failure and final-release paths, and clear scmi_dev->id after freeing it so the final release cannot free the same ID again. | ||||